Having problems with your Flat Panel Televisions ?

I bought a 40 inch Westinghouse led TV. It keeps going back to set up mode. when I am watching something and I try to turn up the volume the TV goes back to set up mode (doest always happen... i would say every three times i do, it does) where I have to scroll down to "connect a game, Blu-Ray, DVD or other player then select my input". its very frustrating. I thought it might be a quirk in the remote so I tried getting a universal remote but it wont connect to the tv at all. I have tried severa



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I bought a 40 inch Westinghouse led TV. It keeps going back to set up mode. when I am watching something and I try to turn up the volume the TV goes back to set up mode (doest always happen... i would say every three times i do, it does) where I have to scroll down to "connect a game, Blu-Ray, DVD or other player then select my input". its very frustrating. I thought it might be a quirk in the remote so I tried getting a universal remote but it wont connect to the tv at all. I have tried severa


... Westinghouse Flat Panel Televisions

My Emerson TV-DVD combo powers on and runs a channel search or tries to change settings on its own. It also over-rides signals from the remote. It switchhes modes so that I cannot watch DVDs. Occurrences of the problem are random day and night.. I have tried covering the sensor with aluminum fois and by hanging a CD in front of it. I have changed it's position in the room and the direction it faces three times. Nothing works! It is not connected to any input media, I only use it for watc


I think problem not from remocon.\015\012Switches on front may cause it.\015\012Open than replace switch may solve this problem. ... Emerson EWC13D4 13 in. TV/DVD Combo

I need to get into the factory service mode either by the controls on the tv, or the remote control to adjust the red green and blue offsets and the red green and blue bias to adjust my black and white background. My tv mode and connection of a dvd/vcr player mode is bluish or greenish or pinkish. I can't find the service manual on the internet. They want over $80.00 to adjust the black and white. I tried resetting the tv to original factory settings, but it did not change the background. I also


Good day!If you want to reset your TV on the factory settings.You have to do is push the menu button on your remote and go to the settings and find the default.After that the factory settings is activated.Then finally go ... Polaroid 1521-TLUB LCD TV

I have a jvc 46 inch lcd tv model LT42E478 and the picture has a lot white color i have tried checking the connections and the menu setting in picture mode i even set it back to factory defaults have you ever herd of this problem


Yes and in several brands it is not uncommon= the main board and others communicate and control this function= means it could be anywhere--not easy except by subbing boards to find---Shops will either do that or use a scope and expensive signal gener ... JVC HD-56G886 56" Rear Projection HDTV

I am having problem setting up my hdmi connection with my panasonic viera model TH-L32C10X2. i cant get it connected to my sony ps3. all cable connections are connected. set the tv to either hdmi1 or hdmi2. then tried setting it up on the ps3 console. but when i tried to change the ps3 setting to hdmi setting, the picture goes blank. and after 30 seconds goes back to its original picture. please advice what to do. thanks


I do not own a PS/3, but I will try to help just in case you dont get another expert at this late hour....\015\012\015\012It sounds like you need to save the changes on your PS/3. It is timing out and going back to default because the cha ... Flat Panel Televisions

I have a technisat hdfv desk top box. I have been trying to connect in via the hdmi connection. I keep getting the message mode not supported. It works fine via the scart connection. I have tried changing the hdmi cable but still get the same message. I know the hdmi connection on the tv is ok as I can run a blue ray from it. Took it back to the dealer they tried and got same message. They thought it could be a fault with hdmi on the box. The unit was exchanged. Tried again but still get the sam


You might want to see if a firmware upgrade exists for this issue in the Samsung set you have. ... Samsung Flat Panel Televisions

Toshiba 32a33. I'll be watching tv and the volume bar shows goes down to 0 (no sound) when it is in this mode the remote control will not work on the volume, you can get up and manually up the volume but as soon as you let go of the volume + button. The volume climbs back to O (no sound). Every once in while it will repair itself and life is good, well it's now back to it's old tricks. I have tried unpluging tv, putting new batteries in remote control, don't know what else to try. HELP I think i


1st check to see if your remote volume down button is stuck. 2nd do you have wireless internet (router) or any other wireless devices phones,ceiling fans, another Toshiba remote, if so try unplugging them (or remove the batteries if it's a remote) wh ... Toshiba 32A33 32" TV

My sony KP-51WS500 needs reset. I hit a button on the remote and my picture went off. I started pushing buttons like an idiot trying to get the stations back and in the process it messed my picture up. I have tried everything. I can't get it ti set back to factory settings. Can someone please help?


It is possible that you messed up the convergance of the projector lamps on this TV. Try the convergance setup to see if this helps. ... Sony KP-51WS500 51" Rear Projection Television

T.V. all of a sudden started changing inputs all by itself. I was watching it one day and the menu screen popped up and started scrolling through input options then selecting one at random and changing. I never touched the remote!!! I tried turning it off and turning it back on and i still happened. I took the batteries out of the remote and it still happened. I even unplugged the tv for a while and plugged it back in and still doing the same thing. It happens every couple of minutes, any adive?


The only thing you can do is replace the Main Board, which will be about 1/2 of what you paid for the set. I don't recommend it. ... Insignia NS-LCD22-09 LCD HDTV

I can only get one av on my TEAC CRT TV model No. CT-M711S and when i connect my set top box I cannot get it to work - i guess it needs a different av but I have tried and tride with the remote to find it but can't. When the av comes on screen there is a red arrow below it pointing down. I have tried the set top box that came with it, which is a TEACDigital Terrerestrial Receiver Model No. SDB440. Also I have tried my previous set top box that I know works for sure because I had it working


... Projection Televisions

Input Problems When turned on, the HDMI1 input shows up in the upper right corner, then the set gives a no input message, also tried hooking cable directly to the tv and the auto channel search did not work, and the set does not respond to the remote. The set worked fine yesterday, and when I turned it on this evening it started this. Any help would be appreciated.


... Flat Panel Televisions

Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable


... Haier HLH32ATBB 32 in. LCD HDTV

I have an LG 42PG60UD. I am unable to access the menu on this set which I have had since new. If you press the menu button on the remote or the bottom of the set, the menu bar comes up on the screen. If you try then to select any of the sub menus, highlight them and press enter, the TV reverts back to normal viewing and the menu icons disappear. I am therefore unable to access any of the settings in this TV. I feel I need to get it back to the original factory settings so that it can update its


Did you try the buttons on the tv? See if it works and let me know. I am starting to think it needs a firmware update though ... LG 42PG60 42 in. HD-Ready Plasma TV

I have a 19 inch toshiba tv 19A21 but no remote for it. I'm trying to hook up a dvd player to it to play through the tv. All the cables are set up correctly, but I can't find the input channel on the tv that will let me play it. I read the manual for this tv and it says you use the remote to access the input screen, but I do not have a remote. Is there a way to do it through the buttons on the tv? Pressing the volume buttons at the same time got me to a menu screen but I didn't see an optio


Most analog tv,u just reqiure pushing the tv manual button channel up a few times,tv will go into video modes like 1 or 2 for play video devices.If this doen't work,try website like Remotes.com to buy an original remote. ... Toshiba 19A21 19" TV

When trying to set up my new SRP2008B remote should the TV be on or in standby mode? In step 2 should the red LED be flashing or stationary? The Quick start guide is somewhat ambigious about these two pints. I have tried to set it up for three different TV sets but nothing seems to work. Your advice will be appreciated.


U are setting up a universal remote?Yes,tv should be on,second push the search button on the remote,should be flashing and enter all those codes provided by the manual one by one the LED light of the remote should be solid red as the codes enter one ... Philips Flat Panel Televisions

I have RCA model l40fhd41yx9, =dont have the remote fot it and i removed some of the inputs from the list. I now need them back is there any way to set it back to factory setting


... RCA L40FHD41 40. in HDTV

I have a Vizio 42" LCD model VO 420E television connected to my Acer laptop. I'm trying to use my TV as my monitor. The 2 are connected, but my TV remote buttons are unreadable. What do I need to do with the remote to set up my TV as my monitor?


... Vizio 42 in. LCD TV

I lost my remote for the Disney Mickey Mouse TV and i cant get on the input channels and im trying to set up the wii on the tv i have a universal remote but how do i switch the input? also is there a button on the actual tv itself?


Without its original remote control, it will be impossible to select. ... Disney DT1300-C 13" TV

I have tried to retune my acoustic Solutions freeview tv/dvd player (model astvd-31199-s2-id-hd), and it is now unresponsive. I pressed 'tv menu', selected 'settings' and 'auto retune'. It seemed to work, I.e., it produced a progress bar which over a few minutes completed. Tv then went black, and standby led began flashing. The tv will now do nothing else. Unresponsive to pressing remote buttons or tv buttons, won't even switch to an alternative mode (I.e., dvd mode). Tried unpluging and even re


... Flat Panel Televisions

I accidentially turned pip on using my comcast remote. I pressed TV then the Help button and it went into pip mode. I tried using the same method to turn it back off but all it did was blink and come right back to the pip mode. Please help me


... Sony KV-27XBR45 27" TV

I do not have a remote for my sylvania model 6519da; I have a DVR from direct tv that I am trying to hook up to my tv; however, I am not able to put the tv onto a gaming or input mode. Is their a manual way of puting the tv into the correct mode or do I need a remote control?


... Sylvania 6519DA 19" TV

Hi, I have a Sharp Aquos LC-19DV28UT given to me as a gift. I connect the cable from the cable box to the TV, give the remote the proper code, and the TV turns on OK. But then the picture flashes for a brief second, then the picture goes away. The sound is still there. Whenever I try to display any type of menu, it does not display. I tried the TV on 2 different cable connections that work with the current TV, and same problem. I have a feeling there's some setting I need to adjust, but c


... Sharp LC19DV28UT 19 in LCD TVDVD Combo

Mytoshiba 32av600a keeps changing inputs on its own, now it is getting progressively worse and every time i try and use either the remote or change volume or channel using the tv it flicks input. i have checked the remote and nothing is stuck, and heave removed batteries, i have unplugged the tv and restored factory settings but nothing has worked


... Toshiba 32AV600E 32 in. TV

Lost picture Lately,after about an hr1/2 the picture suddenly disappears. I still have sound but the screen goes black.. no warning, just picture gone. new batteries in the remote. I shut the system down (set top box&tv) then turn it back on and so far the picture's been coming back. I've had the set since '05.I'd appreciate your input. Thanks.


Try unplugging everything and then plugging it back in. When my xbox had the "ring of fire" my brother asked me to fix it and I just unplugged and re plugged it worked and came back to life. (be careful that you either have the instuction menu for se ... Protron PLTV3250 32 in. LCD Television

I have a Pioneer PDP 4271 HD TV. I want to connect to an external sound system (Bose). I have connected an optical line to both of them. I then attempt to enable this by selecting:- Home Menu/Options/Digital Audio Output on the TV remote. but the "Digital Audio Output" is grayed out and the message says 'my current settings will not allow this option' I have tried many different settings to no avail.


Hi there,\015\012\015\012I'm sorry haven't got the solution to your problem yet. I am unable to see what suggestions have been made so far, so forgive me if I repeat anything you've already been told. I wont make any suggestions about usi ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2874 seconds