Having problems with your Flat Panel Televisions ?

We purchased a Vizio LED Razor model #VM230XVT on 1/4/11 and it worked fine till this past weeked. Now when we turn the power on, all we get is the Vizio screen on the TV and will not connect to the channels. I've tried everything to get past the "Vizio screen" including unplugging the power fow awhile and still no luck. I brought in another tv and hooked it up to the same source and everything worked fine on the other tv. I took our new tv to another source and the same thing occurs, just the l



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

We purchased a Vizio LED Razor model #VM230XVT on 1/4/11 and it worked fine till this past weeked. Now when we turn the power on, all we get is the Vizio screen on the TV and will not connect to the channels. I've tried everything to get past the "Vizio screen" including unplugging the power fow awhile and still no luck. I brought in another tv and hooked it up to the same source and everything worked fine on the other tv. I took our new tv to another source and the same thing occurs, just the l


... Vizio Flat Panel Televisions

LG 47'' LED. Model No. 47LE5310. Tv was working fine in the morning, was on for a couple of hours. went to turn it on later in the afternoon, but something is not right. there is power going to the tv. the power indicator light is on, but there is no picture or sound, just a black screen. tried using another power point, checked all cables and everything seems fine. Tv is about on month old. Any help will be greatly appreciated.


Just look to the picturebored sounding IC ... Flat Panel Televisions

I have a 47 inch 3d lcd vizio tv. My problem is when I power it on the screen comes on with the V logo and it gets stuck there. At this point I cant turn it off, I need to pull out the plug. It used to be a onece in a while problem but now it wont get past the V screen.


... Vizio VO47L 47 in. LCD TV

My Samsung SyncMaster P2570HD's screen is completely white, however it has full sound and everything seems to be working fine, other than the completely white screen. I've unplugged and replugged in all my auxillary cables and power source, and I've tried plugging in the television in different outlets. Please help!


... Flat Panel Televisions

I have an Insignia NS-LCD42HD-09 42 inch flat screen tv. The HDMI input works, but the component cable says no signal, and I only get cable on two channels. All other channels say no signal. The two channels I get have both picture and sound, and it is not my cable company because I plugged in another tv to the same cable, and everything works fine. I've had this TV for almost three years.


... Insignia NS-LCD42HD-09 42 in. HD-Ready LCD TV

I have a weird problem with my samsung 933sn monitor. It was working great for two years, but now it works only in DynamicContrast mode,every other setting gets me a very dark screen, i have connected It to my laptop, same thing. My graphic card is ok, it is just weird. The screen gets so dark, i use my flashlight to open OSD menu and somehow i get it to DynamicContrast mode,turn it off, then turn it on, it works. When i unplug it from power source and from computer, I get


... Samsung SyncMaster 933SN 18.5in. Widescreen LCD Monitor

I have an 11 year old Toshiba DVD player. The last 2 times I rented a disk I had problems. Everything seems to be fine through the previews. When the movie starts to play, the screen goes green. The audio is fine. The video is there, but everything is green. I try the DVD in another player and it worked fine. I tried it in my laptop and it worked fine. Has anyone had a sinillar problem as this? Is there a solution to this issue? Please let me know


This is usually an issue with the component cables running to the TV. Remove the cables and retry with different component cables. If this doesn't fix the issue, its a problem with the DVD player itself.As far as DVD players go, you've do ... Flat Panel Televisions

Vizio VP322. Replaced 3 bulging capacitors on power supply. TV worked great for about 2 days. Now it wont turn on. The Vizio is lit up orange on the bottom but thats it. If I unplug the wiring harness going to the input board the screen will light up black but goes back out as soon as plugged back in. If I unplug all but the AC power cord I get 5V off power supply on one and 200 on both VS and VA. I'm not detecting power at those when all harness are plugged back in.


... Vizio VP322 32 in. Plasma TV

Hi, I have a lg 37lc2d. I turn on the tv, the green power blinks for about 5 seconds. Then all I get is a black screen and no sound. I unpluged the tv from the bluray player and the directv box, and plugged in again, and still the same issue. Why did I unplug everything? To see if i could get the "blue screen" or at least the menu, but no, that did not happen, still black screen, and no sound. Any suggestions? This product has been discontinued, and I have done searches to find that I am not the


Wow I have the same problem! Just happened today same model & everything.This stinks! ... LG 37LC2D Television

Can you help me with a new 32 inch Philips flat screen TV that I cannot get my DVD to indicate a picture, yet I do get audio. The model is 32PFL3505D/F7. I have downloaded the latest software release version, ZPBF2QA_078_0_3202, and still same results. The DVD player is an LG Brand, model DV172K. I have tested that on another flat screen TV and it works fine, yet with the Philips TV I just get audio and no video, and have tried several ways to hook up the wires. Still all same results. It jus


... Philips Flat Panel Televisions

My tv brand is Vivo I got it from Australia about a month ago. Its 50" Plasma tv with HD Tuner. The menu setting and the source selection menu keep popping up on the screen and then it just change to different channels by itself like someone is controlling the remote control. This has been happening for almost weeks now. I turned off the power and unplugged the tv from the power source for a day and turned it on again but it gets normal for about 10 minutes and then the problem starts to occur


... Philips 50PF7320A 50 in. Plasma HDTV

My 50' Vizio flat screen, VP50 HDTV10A, powers on, but I get "no signal" in a blue box, and all buttons except power button on TV are unresponsive(volume, channel, input). I have no remote, and couldnt successfully set up a universal. I tried hooking up different inputs(HDMI, DVD) but nothing. I just want TV to watch cable. What's wrong and how can I get it on?


... Vizio Flat Panel Televisions

I have an LCD Television set Model number LNS3238DX and the picture quality seems to be grainy and poor. When the menu button is pushed, that picture of the menu screen comes in just fine. I noticed that one of the capcitors was bubbled up, so I replaced all of the capacitors on the power supply, but it didn't solve the problem. So I am now wondering if the STP03 is defective and maybe I should change that out because everything in the power supply seems to be running just fine. Please let me kn


If you had a bad cap in the power supply you probably have some more caps that are bad, but may look good, and also change the bridge rectifier, it probably is leaky, and that should take care of the noise problem, if that d ... Samsung Flat Panel Televisions

I have a Sony Bravia KDL52W5100. When I turn on the tv sometimes everything is fine but other times there is no pic only rainbow stripes. I have to turn off and on the tv several times or unplug the tv to get a picture. I have tried rebooting the entire system it worked fine for couple of hours then the problem came back. Sometimes while I am watching a show the screen will gradually change into the rainbow stripe. Do I need to replace my screen and is it worth it?


Check all the flat cable connections from T'Con board to panel, for loose connections. Re-seat them all. ... Sony BRAVIA W-Series KDL-52W5100 52-Inch 1080p 120Hz LCD HDTV

Frozen screen I have the Vizio E421vo and the tv is powering on but staying on the the display screen that says "Vizio" and not going to the cable channels. Neither cable nor tv remote is getting a reaction. I tried unplugging to reboot the tv and had no success. Any idea what would cause this or how to fix it?


... Vizio E421vo 42 Lcd Class Hdtv - Vizio

I don't have power getting to my tv, we moved house I have plugged into power and then tested another item to ensure the power source works. I have one of those power saver plugs and I have removed th


Tried to unplug the tv and don't use for a while to reset the power supply. then re plugged it again and power it on again let see if it works. if still won't power on then the power indicator is blinking you must need to check the power supply board ... Flat Panel Televisions

Vizio Model SV320SVT powers on, after Vizio splash screen it goes blank. Power stays on, but no backlight on screen.


Yes its very repairable as long as the logo stays white you can assume the main boards good. I would recomend contacting the people at www.tvrepairworld.com by hitting the con ... Vizio SV320XVT 32 in. TV

My kids broke the remote that came with my vizio soundbar, I bought a universal that worked fine for about 6 months and now I can not get a remote to work with my vizio at all. I bought a new remote and it blinked to show it accepted the code but it will not work. My vizio soundbar works if you use the power button the top of it and the volume control, so can you tell me what the problem is?


Hello,The remotes you have purchased and tried, are universal remotes ? For an item like that the default remote that came with it would work best. I would email Vizio customer support and get a replacement. I had to do the same thing abo ... Flat Panel Televisions

Vizio VW42L HDTV. I lose audio and video after several minutes but the power light remains on. If I turn power off and on right away, the screen flashes and then nothing. If I wait awhile, I get audio and video for several minutes then the same thing happens. I looked at the power supply board and it doesn't look like any of the caps are bulging.


Please replace power supply board that seems defective and causing problem.Required board would be available in shopjimmy.com ... Flat Panel Televisions

I replaced the STK chips and one pico fuse that was blown on the input power board (the fuses and resistors near the STK chips are fine). I turn the power on, no screen and I get sound for 1 second, then it turns itself off. The power LED blinks 4 times, long pause then repeats. What should I look at next.


A blink of 4 times is an error code that there is no vertical deflection. There may still be a problem with the + or - 15 volt supplies. This error is generate when the vertical deflection pulse is missing. there might be a problem with ic 8003 ... Sony KP-51WS500 51" Rear Projection Television

When i tried to turn on tv nothing happened like its not getting power. i checked the power source and everything there is all ok


Hi Schaef4,\012\012Here are some DIY steps that may help you fixing the problem.\012\012I'm assuming that your unit is dead set without an standby LED\012light and your outlet is live. ... Panasonic Standard (CRT) Televisions

Sanyo DP42746 TV - I get the black screen and no sound (like many others). What I've tried so far, 1)checked all the fuses, 2) Checked PWB input and out (118 vac), unplugged the power cord waited a few minutes and plugged it back in. I get the click when I turned it on and a few seconds later another click. Then, the error led blips 12 times (Time Out error). Any ideas Matt?


... Sanyo DP42746 42 in. Plasma Television

PHILIPS Software /Hardware problem 32pfl5522d blue screen nothing works Checked the basics holding menu , Connecting av source i get nothing Just blue screen, psu looks ok. I also noticed the blue led flashes when pressing menue or program keys Only buttons what work are power and volume keys Any knowlege of this uncommon problem would be ace :D thanks !!


... Philips Flat Panel Televisions

47LG50 screen light goes black after about 45 minutes of being on, sound still ok. Turn the tv off and back on and its fine for another 45 mins to an hour. The on/off light goes from red to blue-ish when screen goes black. As a note I took out the power board adn checked the capacitors and none where bulging or burst (someone said maybe they are drying out)...does that sound like the problem of is this an inverter board issue. I just want to change the what might be the most likely issue


Good day!That problem is commonly happens when the inverter board failed.But before you replaced that its better to check this out first.Just follow this simple and D.I.Y procedure on troubleshooting. ... Flat Panel Televisions

I have a 19in Hitachi TV, I bought it yesterday... Everything went fine, I pressed some buttons and then the number 7 keeps on appering on the top left side of the screen and it doesnt allow me to go to another channels or even switch it off with the remote control or even the button tv... I had to unplag it an when I switch it on, those numbers keep on appearing ont he screen.


Try changing the batterys ... Hitachi P50H401 50 in. Plasma HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3398 seconds