Having problems with your Projection Televisions ?

Do you guys know a good Toshiba TV tech or company that can come out and look at my TV? My TV keeps just keeps shutting off for no reason. Model# TZ50V51 SN: 40952201



Answers :

This is typical with many sets when it goes old as there is a high possibility that the components over a period of heating and cooling , tend to bring on a problem of dry soldering. So my advice is to check the set for some loose joints that have played on to give you these erratic shut downs.
\012

Remove main plug, the covers - with caution of high voltage, check for dry joints, use a good soldering iron to solder all suspected points. Please find below a tip on SMPS
\012

http://www.fixya.com/support/r5826301-working_switch_mode_power_supplies
\012


\012

For the support center near to you click on the link below
\012

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/gaspLocator.jsp?subs=tais
\012


Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Do you guys know a good Toshiba TV tech or company that can come out and look at my TV? My TV keeps just keeps shutting off for no reason. Model# TZ50V51 SN: 40952201


This is typical with many sets when it goes old as there is a high possibility that the components over a period of heating and cooling , tend to bring on a problem of dry soldering. So my advice is to check the set for some loose joints tha ... Toshiba TZ50V51 50" Rear Projection Television

Keeps shutting Down


Have to start at the beginning---Lamp? Ballast? Color wheel? ... Samsung HL-R6167W 61" HDTV

Samsung 4254 Plasma keeps shutting itself off and then clicks like it is trying to turn itself back on. Sometimes it does turn back on and then shuts off again and keeps doing this over and over. The TV is 3 years old.


Take the back off the tv follow the power cord it will connect to an electrical board. Look at the board carefully you will find a few capacitors look at the top of the caps they should all appear flat if you see any that are bulged or expanded th ... Samsung HP-R4262 42 in. Plasma Television

Show me how to fix my rca hdtv keep shutting off


... RCA HD52W59 HDTV Projection Television

My Sony Bravia NX711 LED 3D tv keeps shutting off and resetting itself Turns back on for 4-5 seconds and just keeps repeating the same thing over and over unless I power the tv off. Just randomly happened while watching television.. After shutting off I kept hearing a clicking noise and the red indicator light would go on and off so I unplugged it. Need help please tv was purchase less than a year ago


... Sony Flat Panel Televisions

PT-50lc14 keeps shutting down. We just replaced the lamp and reset the meter. The tv turns on and will run for an indescriminate time and shut off. it may be 15 minutes or an hour. when it shuts off the light will go from green to orange, then flash red. Eventually it will go to solid red and th tv will turn back on.


... Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television

I have a Olevia 226T and it keeps randomly shutting off. I tired unplugging everything and letting it sit over night but that only fixed it for a day. If I shut it off all day and turn it on at night it will work for about 40 minutes before shutting off. When I turn it off then and turn it back on it will only stay for 10-20 minutes. I have had the tv for about 5 years and never had an issue before. Any help??


... Syntax Olevia 226T 26 in. LCD Television

I have a 50 inch hLn5065w ,when i turn it on a very lous noise and vibration seem to be coming if your looking at the back of the tv its coming from the right side looking from the back.i know its not a fan thats right in front of that bulb looking thing because i unplugged that fan just to make sure it wasnt.but whatever it is seems to shut the tv off after 10 seconds of the noise and loud vibrating,do you have a clue what it could be?


I have a 50inch Samsung TV\015\012need color wheel for projector TV Samsung 50" Tantus model HLM 507w SVC model version\015\012Need part # and cost to replace damaged unit. Thanks for your prompt respons ... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

Mitsubishi wd-65734 keeps shutting off and then the red lamp light comes on. After a minute I can turn it back on, it will work again for a short while and then shut off again


... Mitsubishi WD-65734 65" HDTV

My 32 inch Vizio HDTV keeps shutting itself off. I turn it on, the Vizio label comes on, and it immediately shuts down. My son was playing with the remote before this started, and the screen said input locked. Any suggestions would've helpful.


Reset the TV to its factory settings. For more details, refer its user manual. Unplug the TV from AC mains socket, and replug it after some time, say after 2 minutes or so. ... Flat Panel Televisions

Why does my Emerson HDTV keep shutting off. Sometimes it will shut off after 10 mins others a half hour. I tried vacuuming the back and unplugged it from the power strip and plugged it into wall. What else can it be?


A number of possible causes but the set has a shutdown circuit tied mainly to the power supply in your set===a voltage goes high or low, a waveform changes and set for self protection shuts off.I would start by looking in the power supply or ... Emerson Flat Panel Televisions

Samsung dlp hls4666wx TV. After a power surge, my TV shuts off after about 4 minutes. The stand by, TV, timer lights flash...manual says it's the bulb or fan. Only, I bought a new bulb, and noticed both fans are working. Still does it. It makes a small pop them hiss or buzz sound when it offers the bulb down. The power supply and ballast look ok (circuit boards). Perfect picture and sound before shutting down. I've heard there are 3 fans but only see two. Could it be another fan I don't see? Or


... Projection Televisions

My Vizio keeps shutting off, the standby power button stays lit however the screen will shut off randomly. It seems to stay on longer after it's been on for a while.


... Vizio 42 in. LCD TV

My 27 in truflat worked fine ,then it just shut off,,,now it keeps coming on and shutting back off constantly


You have developed a shut down issue that can not be resolve other than by a TV repair specialist. This TV is know to have issues with a device called the IHVT (Intergrated High Voltage Transformer). Given this unit is an old CRT based NTSC type I ... RCA TruFlat 27F520T 27" TV

Tv shuts off, when turned back on, the green light keeps blinking and tv wont come back on. if you leave off for a few min. the tv will come back on. then the tv will shut off again after a few min.


One of two things...first hold power button while you hold the up button on your remote, this will reset your tv to manufacturer's settings....you could have sleep timer on.....if this does not work, you have to replace the lamp, my tv did the same t ... Sony Grand WEGA KDF55E2000 55" Projection HDTV

Blank Screen When I turn on the tv, it looks like the backlight is going to stay on, but it shuts off. There is sound to the television still, and it looks like there is a faint outline of what is supposed to be displayed on the screen. I heard something about the inverter board, but is it the board or the lamp itself?


... Samsung LN32A550 32 in. LCD TV

Green light stays on red light blinks set won,t go on but bulb does not look blown also fan does not run after tv is shut off like it use to before and tv shuts itself off after a while when it does work with dim picture


With a dim picture even if lamp looks ok I would make it suspect number one---going to have to decide if you want to buy a new lamp to find out--average life is 1-2 thousand hours. ... Toshiba TheaterWide 52HM84 52" Rear Projection HDTV-Ready Television

My PDP-4280HD Pioneer Plasma keeps shutting off and the blue like flashes 12 times pauses then continues to flash 12 times and so on. I turn the tv on it works fine then shuts off after 10 to 15 minutes. Please help.


... Pioneer PDP-4280HD 42 in. Plasma Television

Philips 42model num:pf5331/10, plasma tv, wide screen flat tv, the red light keeps blinking, one long then two short blinks, took back off the tv, pluged in power leed, power goes to power board, then clicks twice and will not start, yes i think its the power board, looked at all capacitors they look good, i have had the tv since 2006 if you can help me, my email is [email protected] thanks terry edwards


Hi raftxxxPlease everyone that comes across my info take a few seconds of your time to rate my solution which you can select at the bottom of my answer Was this solution helpful? YES or NO :)... As i have taken time to answer your questio ... Philips 42PF5421 42 in. LCD Television

My tv keeps shutting off. it works fine for a couple of days and at times it only goes back on when i keep plugging it into the power outlet.


Toshiba 55H70 55" Take the back off and pull the HV power board and check all the solder joints, seem to me that you has a cold solder joint. check it out be carefull with high voltages. ... Toshiba 55H70 55" Rear Projection Television

I have 58 plazma flat screen Maxent about 4 yrs old. SV - 58HPT51-0708-V1.0. For the last couple of weeks it keeps shutting itself off at various times. Could be 10 min, then 20, then 3. Once it begins shutting itself off it doesn't stop. Is there an upgrade or a program to run to fix this problem? Is Maxent standing behind it's products or out in the front taking money they shoulding have to be dishing out in repairs. Things are quality like they used to be. I had a Magnavox for 25 year


... Flat Panel Televisions

I have a 53 inch hitachi proj tv...model 53UWX10BA....and am doing some of my own repairs...but one of the 1.8 Ohms resistors keeps burning out. The solders look good...I have tested everything and can not find anything wrong. Why does the same resistor keep burning out?! I must have gone through 6 or 8. I am at my end!!! Please help! The original problem is that the coloring is wrong. It is really RED. Am ultimately trying to get that fixed. Thanks!


1.8 ohm are protect on convergence ics --stk-392-110 or stk-392-150---Change both ics and make sure not shorted pins via solder connections.Let me know if you need help ... Hitachi Projection Televisions

RCA m61wh185 shutting off and on and blinking 5 times, I replaced the lamp twice from a reputable firm with OEM replacement, but it is still doing it. It will run a while then start this up again. Sometimes after it does it we can watch it a while, sometimes it keeps doing it til we shut off the tv for a while. But it always starts it again at some point.


... RCA Scenium M61WH185 61" HDTV

I turn the Tv on...it makes a sound like a short and shuts off right away...I pulled the Tv out and looked at the back...turned the tv on again and in the left corner of the TV I saw sparks and the TV shut off right away...its been doing it for 2 days but this time it doesnt come on at all


Hi,the issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge. ... RCA HD56W66 56" HDTV

HI i have an RCA HD52W59 and the picture looks 3D, I can use the manual convergence but when tv is shut off and turned back on it goes back to the 3D look and the auto convergence does not work - the screen goes black and the green box startes in the corner but then just quits


Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instructions and repair support are avail from ... RCA HD52W59 HDTV Projection Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0905 seconds