Having problems with your Flat Panel Televisions ?

My regza tv has a facility where you can change the input from scart1, scart 2, pc, hdmi, etc, etc, so you could change the input you are viewing and watch for example something on the pc. however, very recently the tv will start changing inputs on its own, without me doing anything. i'll be watching tv and the menu box will appear up on tv and it will turn itself onto pc of scart 2 of its own accord. no other cables are connected to the tv, but the scart lead from the cable box. i hav



Answers :

Dear user,

may be its a rust problem in your tv side buttons that auto changing the input.or may be its system board faulty.kindly hit the buttons with hard thing bt carefully.if its not work then try to do factory reset other wise its system board is faulty.

Regards
Salman
Pakistan

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My regza tv has a facility where you can change the input from scart1, scart 2, pc, hdmi, etc, etc, so you could change the input you are viewing and watch for example something on the pc. however, very recently the tv will start changing inputs on its own, without me doing anything. i'll be watching tv and the menu box will appear up on tv and it will turn itself onto pc of scart 2 of its own accord. no other cables are connected to the tv, but the scart lead from the cable box. i hav


Dear user,may be its a rust problem in your tv side buttons that auto changing the input.or may be its system board faulty.kindly hit the buttons with hard thing bt carefully.if its not work then try to do factory reset other wise its sys ... Toshiba REGZA 32AV615 32 in. LCD TV

Remote sensor on tv not responding I,have to turn on tv manually. change input manually,tv reception is ok. Volume cannot be controlled,it will lock in at full volume or drift back & forth,mostley full volume. If I use volume buttons on tv , it changes input (video 1 pc hdmi & so on) Once in a while setup screen will appear then disappear. I have changed batteries in the remote, I don't believe this is the problem.When tv is first turned on the volume icon at bottom off screen will go from 0-60


Have you checked your remote to see if its working? If you have a digital camera or camera phone, point the remote at the lense and see if it shows up on camera screen. If it is working then the IR sensor on the tv could be bad. ... Sylvania LC420SS8 LCD TV

AT NIGHT, TV SWITCHES ON AUTOMATICALLY AND CHANGES FROM SIDE AV TO OTHER OPTIONS, I.E. PC / HD 1 ETC. LAST NIGHT TV SWITCHES ON, CHANGED TO HD1 AND TURN VOLUME AUTOMATICALLY TO 0. CAN'T GET VOLUME UP. WHEN I TOUCH VOLUME BUTTON ON REMOTE AND/OR TV, TV CHANGES FROM SIDE AV TO HD1 OR OTHER. HAVE PROBLEMS FOR 2 WEEKS THEN STOP, THEN STARTED AGAIN. SOMETIMES WHEN WATCHING TV, VOLUME SCREEN APPEARS ON TV SCREEN AND TURNS DOWN AUTOMATICALLY.


What you describe is almost impossible ..the only explaining is someone with a compatible remote control messing around with you ..so ...pay attention ..and after that if you are completely sure that this is out of case...Leave a comment and I will ... Philips 42PFL5332D 42 in. LCD Television

About 8 months ago, every time I turned on the TV (SK-26H590D), only vertical lines would appears... almost like watercolor: green, orange, etc. However, you could hear the channels and change them as well... but still no picture at first. The the channel would come on after about 5-10 minutes. This has gone on since then. Almost as if the TV needs to "warm up." Today, only the vertical lines appeared but the tv never came on all day... just the voice. And the channels can be changed, but no pic


Hello\015\012Get into Menu Operations and come to the window video reset. You can get this in its manual section [1-6]. Reset all video sub menu items to factory reset. Check out after this reset process whether the problem solves or not. If ... Westinghouse SK-26H590D Television

I have a Gateway p46m103 flat screen television that will only turn on after plugging and unplugging the power cord many times. It would eventually turn on each time I tried this. Now, however, the green power light comes on, and I can hear it is on, but the screen is all black. I even tried pressing the Input button on the front of the television, to see if I had accidentally changed it, and even the icon on the screen will not show, to see if I am seeing the cable box, or the dvd player, etc.


... Gateway PLSM46TV 46 in. Television

I have the samsung LN52A550. When I turn the tv on a blue screen appears. I tried changing the source with the menu button but does not display anything. The TV is about 2 years old. The sound works. When I try a different input(dvd player) same results(althoug I cannot change ths source because the menu does not display). The dvd is attached via a three cable. The directtv is attached via hdmi cable.


Try thisMethod one- with set on, hold down the exit button on the remote for 10 seconds. It will bring up the warning it will reset to the defaults it had when removed from the box and powered up initially. in the warning box it will show the c ... Samsung LN52A550 LCD TV

How can I hook my my sharp LCD TV up with my desktop computer without a monitor to change the settings on my my computer. I have both HDMI cable and VGA cable. When I turn my computer on no picture pops up and there is not PC option appearing in my input menu. Please please help.


Try to reset your computer BIOS - open your CPU, plug off the power, remove the battery in the motherboard then put it back after 20 seconds. Plug the VGA cable to your CPU and connect it to your LCD TV. Try ro open your CPU, there should be disp ... Flat Panel Televisions

My name is David and the problem with my TV is that it turns on yet it doesn't display anything. I can see the screen trying to become active yet no picture appears regardless of which input I use. If the fix is a matter of changing out some chip or board I would like to do it myself David


It sounds like the lamp might be bad. The lamp lights up the screen from behind, so without the light you can see shapes moving but they are very dark. ... Sony KDL-46XBR4 46 in. LCD Television

Vizio e370vl 37" LCD TV powers off by itself. It comes on, displays Vizio logo white, then turns off and goes to yellow. We tried unplugging everything for 5mins. Tried changing inputs, no RGB cable c


... Vizio E370VL 37 in. LCD HDTV

T.V. all of a sudden started changing inputs all by itself. I was watching it one day and the menu screen popped up and started scrolling through input options then selecting one at random and changing. I never touched the remote!!! I tried turning it off and turning it back on and i still happened. I took the batteries out of the remote and it still happened. I even unplugged the tv for a while and plugged it back in and still doing the same thing. It happens every couple of minutes, any adive?


The only thing you can do is replace the Main Board, which will be about 1/2 of what you paid for the set. I don't recommend it. ... Insignia NS-LCD22-09 LCD HDTV

I have a Sharp AQUOS LC-26DV22U 26 in. LCD TV with a built in DVD. When I turn the TV on it will come on as it usually does (the please wait appears in the lower left corner and moments later in the right hand corner the channel box appears and then the picture comes on) and after about 30 - 45 seconds the screen goes blank, the audio stays on and I can change the channels with no picture. When I turn the TV off and wait a couple seconds and turn it back on the "please wait" that appears in the


... Sharp AQUOS LC-26DV22U 26" LCD TV

I have the RCA F27351WN and cannot turn to the input channel. I have tried channels 91-99 and I am unable to get to channel 00. How can I change to the input. I just bought a universal RCA remote and programmed it to the TV but it still will not change the channel and when I push input on the remote it changes to channel 3. How can I fix this?


Try by pressing "0, 0" by remote control. If it do not changes, there is no other way with select it by universal remote control. ... RCA F27450 27" TV

After punching some of the buttons in the pip row (bottom of the remote control) a message that says "no signal" appeared on the screen and within a few seconds, the tv set turned off. After several seconds, I can again turn on the tv, but before I can attempt to change anything, the "no signal" message appears and the tv turns itself off. Any suggestions???????????


You'll need to do a master reset of the devicecheck link --> www.retrevo.com/support/Vizio-L32-TVs-manual/id/512dj084/t/2 ... Vizio L32 32 in. LCD HDTV

My tv will not retain the input 4 setting to receive the signal from my cable box. When you turn the TV on it would say please wait and then the Input 4 box would appear ont he screen and then the picture would appear. The tv now flashes please wait and then goes black. When you press input on the remote, nothing happens.


... Sharp LC40E77U LCD TV

I have hitachi t.v. model p50s601 when i turn it on the picture appeares about 1 second imeddietly turns off when it turns off no audio and no picture. already changed the capacitors on the power board c553-c552 = to 3300uf to 100 volts. checked xbus/xsus apperantly no problem. on the power board there is a voltage of vs=88.3v appeares in seconds then imediatly goes to 0. my question is what else can i check? or what could be the problem? thank you for your assistence.


The main rail voltage is not building up and so there is a possibility of a high drain on the output sections. The +B voltage seems to come up and then flatter off as there is a negative feedback to the processor to cut off ... Flat Panel Televisions

I have a compaq w185q lcd monitor for pc.I have got a tv card with it so i can also watch tv with it.But today while watching tv on it i changed its input signal to something like 1600x..the screen suddenly black out with error message input signal out of range change to 1300 x..like this.and to change the setting i clicked menu from remote but menu doesnt appear so i couldnt reset it.it works fine when i switch to pc side but on tv side i get this error message.what to do please help!


... Flat Panel Televisions

Everytime i turn on & change channels of my prima tv (ph-4237p model) there's always black box appear on the screen, I just press any key to get rid of it but again and Gin when i change chann


... Flat Panel Televisions

Lc52d85un turned off the tv last night . Turned it on only sound green light is on. volume won't change,black screen can't see anything on screen to change input nothing but a black screen help


... Flat Panel Televisions

When I turn up the volume on my tv it skips by 3. (03, 06, 09 etc etc) how can change it so the volume turns up one at a time?


... ViewSonic N2750w 27 in. HD-Ready LCD Television

I Have a problem w/ my Sharp TV 20V-S200 they appear a video in only a seconds and it fade to blue screen the sounds is ok but the video is the only problem when i always turn on the power it always appear the video in only a seconds and it always turn into blue screen please tell me the parts that i need to change thanks in advance hope someone can tell me the problem


Dear Sir:This a problem with HSYN+VSYN, you must follow the signal, and then the RGC. see the diagramGod bless you ... Flat Panel Televisions

Tn55x81 T.v. turns on and no picture, but has sound, when t.v. turns off, blue flash follows, sound appears to be fine and no picture, not even when I change to standard channel. Fuses appear to be fine.


Hi you have asked me to mail the transcript but I do not have your ID. So please send me a mail to [email protected] and I will send you the transcript. ... Toshiba Flat Panel Televisions

I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still


It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ... Sharp Aquos LC-46D62U 46 in. LCD HDTV

I cannot change the input from TV to HDMI or AV2. The TV set continuously wants to do an auto scan. How do I turn off the Auto Scan feature so I can change the input either HDMI or AV1 or AV2


... Dynex 32 in. LCD Flat-Panel HDTV

Toshiba 32AF44. While watching a baseball game yesterday, the volume bar appeared by itself and scrolled down to zero. The bar will not disappear. It's like someone is holding the down button. Tried using the TV remote to raise the volume, change channels, turn TV off. The remote changes nothing. So, I took batteries out of remote to isolate the problem to the TV. Using only the buttons on front of TV: On-off button will not turn off the TV. Volume-up button works until I release, and then


... Toshiba 32AF44 32" TV

I have a Sony WEGA KLV-23M1 that has no picture. It's just black. I hooked up a DVD player to all of the inputs. The audio for each input is good. There's just no picture. The backlight appears to be on because the screen lightens when the TV turns on. It's black but not as black when it is turned off. I'm wondering if I need to get a new video card (is that what it is called?) or is it even possible for the cables inside to be worn or loose or what not? Thanks


... Sony WEGA KLV-23M1 23 in. HD-Ready LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1117 seconds