Having problems with your Projection Televisions ?

Hello, we have a 52hmx95 for about 6 years with three bulb replacements the most recent being Nov2010. Noticed about a month ago incessant flickering and color fade ou(especially fleshtones) and color distortion AFTER 15minutes or so from the time it was originally turned on. Seems to be okay until its WARMED up then ...Now that I think of it seems also like the picture is much darker than it should be and it doesnt help when i make the adjustments via the menu. Do you think its a faulty lamp,co

Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hello, we have a 52hmx95 for about 6 years with three bulb replacements the most recent being Nov2010. Noticed about a month ago incessant flickering and color fade ou(especially fleshtones) and color distortion AFTER 15minutes or so from the time it was originally turned on. Seems to be okay until its WARMED up then ...Now that I think of it seems also like the picture is much darker than it should be and it doesnt help when i make the adjustments via the menu. Do you think its a faulty lamp,co

... Toshiba 52HMX94 52" Rear Projection HDTV

I have a 22 inch AOC Envision LCD TV. When I first turn it on, only the top half of the screen displays picture while the bottom half is a gray/black color. If I wait about ten minutes or if I tap on the back of the TV, the picture is completely restored and I can watch everything just fine. However, it is pretty annoying to wait for the picture to come back. Since the picture does come back after a while and looks fine, I don't think I have a broken backlight or anything like that. Also, becaus

There is some loose solder terminals at the vertical scan output section at printed circuit board. If you are handy in electronic circuit boards, loacate the vertical output section, resolder all the suspected solder terminals there. This must sure ... Standard (CRT) Televisions

Distorted Picture there are six faint horizontal bars that stretch across the screen. over the bars i can see sparkling colors that wave across the bars sort of like the aurora borealis but in a digitalized way. i have tried the same tv signal on another tv and it displayed it just fine so there seems to be something wrong with this tv. also, when i don't have a signal connected to the tv and the the "DELL" logo is on the screen, i still see the same aurora borealis affect.

Problem is likely main board (processes all signals) or even the power supply board is possible.Considering brand parts may be hard or impossible to find. ... Dell W4201C 42 in. Plasma HDTV

I have a 63' projection TV. The picture is off. All of the lights are working, but the images are fuzzy, and you see the image tripled. The three images overlap each other in red, green, then blue. It seems like the colors have to put back in sync to form one clear image. Also I can see a bow effect at the top of the screen.

Please do us a favor and rate this solution after reading. Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are ... Philips 55PP9363 55" Rear Projection HDTV-Ready Television

I have a Samsung HLP 4674w DLP. The picture started to lose color and look like a negative image. Then it would get scrambled and eventually go out. Powering on and off sometimes fixed it, but only temporarily. Sometimes it would also turn off and on by itself. I thought it may be the lamp so I replaced it, but it did not fix the problem. Next I thought it may be the color wheel so I replaced that, but the problem did not go away. Also when this happens the Power switch will not turn the TV off.

You need to change the lamp out, it builds up a internal resistance, and pulls your voltaged down, it will get to the point where you TV will not come on at all. Replace your lamp, you can get one at ... Samsung HLP4674W 46" Rear Projection HDTV

In the middle of screen the is red area next to the bottome of the picture,and also the picture is not bight like it used to be seems like everything is darker.

Bad optical engine. Your repair cost will exceed $1200 since this part is so expensive. Part# UX25302\012\012Bill W\012integrityhomeworx.com ... Hitachi UltraVision CineForm 55VG825 55" HDTV

I have an RCA DLP tv model HP50LPW52. the sound was there with no picture. since it is 5 years old I replaced the lamp for the first time. got it all hooked up, turned it on and the tv slowly came on. shortly after that it started to squeal like a dry bearing sound.rnI thought cooling fan and pulled them out to check, they seem fine. got online started to read about the color engine or color wheel? I just paid $106 to replace the lamp. Now what should I do? I feel like its gonna cost as much

That is your Color Wheel that is bad. I wish you would have posted the problem before buying a lamp. I would have told you to treat yourself to a new set instead of putting good money into a DLP set that is 5 years old. ... RCA Projection Televisions

I have plugged in the Parrot by Martin Szekely and I I get is the opening menu with four colored blocks and the website address. When I go to the back the navigation keys do not work (I have pressed lightly held down etc.) and also the stand by button also does not work. It seems like I may have a dud as I have no way to access the menu. Any top tips? Also, does it connect to a MAC? I have parellels but wanted to check Nancy

This is a very simple digital frame that needs to connect to a pc or Mac (yes, it will work with one) via WiFi or Bluetooth. If you can't go into the menu to pair it then yes, you got a dud and you must replace it.\012\012\012But you should tr ... Flat Panel Televisions

Picture seems to be offline( curved down) also everything seems doubled and you can see the red, yellow and blue colors of the lenses on the screen

Tv have a problems known as a convergence problems it is dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the board that call the convergence board it is dead.This convergence board requir ... Samsung HCM4215W 42" Rear Projection Television

My sceptre tv picture comes on when I turn the tv on then within 15 seconds it goes black , I still have sound. I have checked all the connections and they seem to be good, I also unplugged the TV for 10 minutes anything think else you can think of is much appreciated

The power supply is failing ... Flat Panel Televisions

We have a vizio hdtv vp42 plasma screen all of a sudden last night entire screen became dull colors are blurred picture is not sharp at all seems like all faded and we are looking through oil. we tried leaving off all day then reseting color settings but nothing has changed??? help

... Vizio P2 42 in. HD-Ready Plasma Television

The problem is that the picture has lines through it. I think it's the convergence that the green color does not line up. I would like to fix it myself. Can you give se advice or picture how do do it

Convergence ics stk392-120 most likely-- you will need 2 ... Flat Panel Televisions

Picture has ghost shadows in the faces of people mainly news anchors. Light colors like whites and oranges also have shadows. What could be causing this?

If it does not really display this when a DVD etc is played via a rear audio/video input it is not the set.Modern cable or sat signals often are compressed and sets cannot on close up views keep up with the signal--when signal is compressed i ... HP Pavilion MD5020N 50" DLP HDTV

TV has power but it won't turn on. Amber colored Vizio is lit up. Press the power on button and nothing happens. Seems like a power supply issue. What do you think?

... Vizio E421vl 42 Inch Class Lcd Hdtv

I have a samsung model# SPR4232X/XAA it turns on and there is sound but no picture...it also seems like there is flashing in the corners

... Samsung SP-R4232 42 in. Plasma HDTV

After about 30 minutes of turning on my LG TV 32 there is a loud whip cracking like sound. The tv screen then normally turns pink but sometimes gets the picture back and the whip cracking sound keeps happening. It seems to me that there may be an overheating problem as it is okay when I leave it turned off for about an hour but it keeps on happening again. PLEASE HELP ME.

... LG 32LC2D Television

I have a magnavox model #6p5440 w103. The picture is out of focus and looks like you're seeing doubles. Also the set 1 auxiliary a/v hook ups in the back work but show no color. Can you help me salvage my game room TV?

If picture looks 3d with colors askew it is a convergence issue--set uses two chips, likely stk-392-120's and both would have to be replaced and set adjusted. ... Philips Projection Televisions

Hello everyone, I am having an interesting issue with my 60vs810 recently and was wondering if some of you guys can help. After the TV has been turned off for a while (about 4 hours or longer), when i turn it on, the screen is fuzzy for about 10 minutes until it is warmed up and then the picture stabilizes. It's hard to explain but it looks like the horizontal hold is shaking really bad. It does it on all of my inputs also. After about 10 minutes, the TV seems to be warmed up and it works

Is the fault affecting the OSD also? If no then it's the signal board. If yes it's the digital board.\012\012\012In both cases the fault is in their respective processor: to decode and process the data they must first size it according to a fi ... Hitachi 60VS810 60" Rear Projection HDTV-Ready Television

I have a movie mate 50 and the picture seems scrambled. Sound is good and all colors spear to be there. It's just scrambled same in other modes also. . Can anyone help me on that It's a 3 chip optical engine. Thank you

... Epson Projection Televisions

Almost every day our t.v. fades in&out for a few seconds. Maybe once. Maybe twice or more. It's seems to be the back ground of the picture. It's during the light of the day. Good color. No other issues & we really like set. It's 46" LED. we bought @ Xmas. Can you help. R.Barg 586-731-6060. THANK YOU

... Samsung PCL5415RB 54" Rear Projection Television

I have a Samsung hlp5063w dlp tv. 1- loud buzzing noise coming from the left side of the set (looking from the front). When I tap it the noise tends to go away and come back. So I'm thinking it's the cooling fan for the lamp which I just replaced. Would the color wheel act like that when I'm tapping the side of the tv? The picture is beautiful and there are no problems there. 2- If its the cooling fan, how do I replace it?

It is much more likely considering all these the wheel fails to be your issue.The problem is often described as a fan like or high pitched sound which since the motor on the wheel turns at over 12,000 rpm is likely to be the cause.Hin ... Samsung Projection Televisions

I have a RCA L26WD26D Flat Screen TV. When you turn it on it will say "please wait". This lasts for 30 seconds or so. Then that goes off and the screen turns black with some sections turning white. It will vary the back and white and will stay like this for maybe 20 minutes. Then it will start showing vertical colored lines. They will change also and eventually turn back to black and white. After leaving the TV on for about 5 or 6 hours, the picture finally shows up and looks fine. So now I'm af

Hi coefremont,\015\012\015\012This is an indication of out-of-regulation in the power supply section. The very\015\012common caused of this fault is the leaky\015\012elec ... RCA L26WD26D 26 in. LCD TV

My Toshiba TV, is having picture and color problems. The color is lost, at times, the the picture looks like a negative. Sometimes, the color returns, but the contrast is bad.

... Projection Televisions

Panasonic PT-47WX42 TV. Picture looks like convergence is out. I also see a Distorted picture like a Filter Capacitor has also gone out. SD Tech said he was familiar with this

It is the the convergence IC that need to be change on the convergence board, and also check for defective electrolytic caps and low ohm resisters that have changed in values too. You can also buy a new convergence module an ... Panasonic PT-47WX42 47" Rear Projection Television

I was given a Sharp TV model LC-26SH12U which was purchased Nov 2007. When I turn on the TV there is sound but no picture. I am using the HMDI input from my cable provider. I do get a picture at times. It seems as if I turn off and on the tv eventually the picture will show up. I have worked tirelessly with the cable provider and it seems to be the tv as when there is no picture I also hook up another tv and get picture from the provider while I'm getting no picture from the LCD tv. Is

Contact the nearest authorised service center for Sharp. You TV need service. ... Sharp LC-26D43U Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1444 seconds