Having problems with your Projection Televisions ?

I can't gey my Toshiba 43HX70 TV to display a 10801 signal? I have checked and rechecked the componenet cables and i can only manage a 480P signal.



Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I can't gey my Toshiba 43HX70 TV to display a 10801 signal? I have checked and rechecked the componenet cables and i can only manage a 480P signal.


... Toshiba 43HX70 43" Rear Projection Television

Okay, so i plugged my xbox in and then i plug it into the tv, but no picture pops up at all, it says check cable signal, but i don't know what cable, and i tried hooking it up in the 1 component(under the 2 cmponent because there's only 2) can u tell me what "check signal cable is" or help me out please?


What colour are the plugs on the lead you are using, if you have a component lead it will have a green a red and a blue plug if its composite you will have a red white and yellow plug ... Flat Panel Televisions

Viewsonic n3290w-au Initially digital audio and video were out of synch, and epg was showing no information for all channels. Ran the auto tuner again and it won't find digital channels at all. Analogue is fine. Have checked cable from tv all the way back to antenna on roof, can't see any problems. What can I check next? Trying to get hold of another tv to check if signal from antenna is okay. Haven't tried a different fly lead, but if analogue reception is perfect then surely the cable is fi


... Flat Panel Televisions

Helo, I have problem with HDMI on SONY KDL 26U2000. I bought digital satelite complette with HDMI. I connected it to TV. But video and audio signall is sometimes shortly breaking. More times on HD programs. My service engiener checked cables - all are OK. He checked satelite signall - all are OK He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly. I would ask you about help. Thank


Sony's can be picky about HDMI.Check for software update that addresses HDMI issues.Contact Sony for software. ! 800 SONY USA ... Flat Panel Televisions

No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg


Have you checked on all inputs including the rear audio and video jacks? ... Sony KDF-50E2000 50" HDTV

Foxsat-HDR 100GB, 2Yrs. old. Problem--HDMI Feed to LG32LC2RR Television---Audio OK but NO Video--OSD--"No Signal" message. Check-- HDMI Feed from DVD Player-- Audio and Video--NO Problem. Check-- SCART Feed to Television NO Problem. Check-- Changed HDMI Cable--- NO Cure. Regards, Ray Parnell.


... Humax Flat Panel Televisions

Check signal cable samsung


... Samsung Flat Panel Televisions

MESSAGE ON SCREEN SIGNAL CHECK CABLE AND ATTENA CONNECTION S


... Samsung Flat Panel Televisions

RCA l42fhd37yx8 connected computer with vga cable have picture for a few minutes then no usable signal message. Checked cable on another tv works fine.


... Flat Panel Televisions

Television say check signal cable . I have a scientific atlanta cable box.What do I do?


How is the TV connected to the cable box (HDMI, component video, etc.)? Make sure that the cables are securely connected and that the TV is on the correct input. Try swapping the current cables for new ones. (The HDMI cable has come loose on my enter ... Flat Panel Televisions

My LG 55" LV9500 loses sound when switching from a standard def (480p) channel to a high def (720p or 1080p) channel. Then if I switch it back to SD the sound will come back. Yet EVERY time I want to watch a channel in HD I have to either turn my tv off and on again or go into my output resolution settings and uncheck 720p/1080p then recheck it again (even though it's already set to automatic). Is it the hdmi cable? The tv? The cable box? Any help would be greatly appreciated as it's driving me


... Flat Panel Televisions

I am tire of cable and want to use an antenna, I have hooked an antenna to the tv checked the hook up and it is secure, but am getting no signal...I have been trying to find a place to change from cable to tv via my remote but not haviing any luck...please help


After u hook up the antenna source like a digital or a roof antena to the tv.Used ur remote go into the tv menu.Goto SETUP,go down to CH.Pick AIR enter and scan for free air DTV channels. ... LG 32LG30 32 in. LCD HDTV

My LG Flatron M2262D, about six months old, stopped working with the on screen message 'check signal cable'. I checked it by using it on another set, and it is perfect. Any ideas?


Check out the menu used to manage your inputs. It sounds like the TV is looking for an input in the wrong location. The signal may be coming in on HDMI port 1 for instance but the TV is monitoring and expecting the signal to be on HDMI port 2. ... Flat Panel Televisions

I have an LG 42LS3450 TV and when I use a coaxial cable to connect my TV to my outdoor cable all I get is black and white words (clearly) on a noisy and snowy Black and white background followed by check your internet connection. We have an over the air digital TV signal in our town. What have I done wrong?.


... LG Flat Panel Televisions

Laptop interference When I open my laptop, my cable, plugged in to my TV, starts reacting with interference, sometimes completely turning to "no signal." When I close my laptop, there stops being interference issues. It doesn't matter whether my wireless internet is connected or not, I've checked the line in where the cable's connected and it's happens with predictable accuracy. Please help!


All laptops must meet certain requirements for interference---about all you can do is move the laptop further away and or see if another laptop has the same issue. ... Vizio L32 32 in. LCD HDTV

On my LG TV RZ-37LZ31 I get a message saying check your signal cable RGB PC How do I check it?


... LG RZ-37LZ30 37 in. LCD Television

My prizmo hd tv keeps telling me that there is no signal. I don't have cable or satellite and I've checked the antenna cable and it is working. Any suggestions?


... Flat Panel Televisions

NO SIGNAL ON LG TV DESPITE IT BEING FINE FOR 2 MONTHS SINCE WE BOUGHT IT. we have checked the aeriel and the aerial cable- both working


Reprogram it. ... LG Flat Panel Televisions

Check signal cable on a P2570HD - Samsung P2570hd 24.6-inch Full 1080p Hdtv Lcd Monitor


... Samsung P2570hd 24.6-inch Full 1080p Hdtv Lcd Monitor

Weak or no signal (1)check antenna cable connection (2)run auto program menu


... Flat Panel Televisions

No signal - check aerial cable connection


Either aerial cable, of tuner is faulty. ... Flat Panel Televisions

Hdtv blue screen with white strips saying A1 and unusable signal.....checked with cable provider and was told it was the tv


Sounds like the small signal board has an issue. You can get replacement parts from www.tvrepairworld.com ... RCA HD52W59 HDTV Projection Television

Unsupported audio signal. check your audio output. cable box > hmdi > tv


Double check your HDMI cable and connectors and make sure that they are properly connected. try to replace your AV & HDMI cables ... Sony BRAVIA KDL-40S2010 40 in. LCD Television

Suddenly my receiver writes no signal why??? By the way all my cables are plugged in I've checked them


Are you using a cable box?. tried to reset it. ... Flat Panel Televisions

What does the check signal cable mean? on the Samsung dn1e tv


... Samsung Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0658 seconds