Having problems with your Flat Panel Televisions ?

My toshiba 42hl196 popped when I turned it on last month. 3 blinking lights. Brought to tv repair - they say it was the power supply and tried replacing the ICs with a kit - did not work. Said coul

\015 My toshiba 42hl196 popped when I turned it on last month from the power button on the set. Got the 3 blinking red lights. Brought to a TV repair - they said it was a power supply related issue and tried replacing the ICs with a kit on the power supply \012(believe there were 3). This did not work. TV repair said could not get new parts - and declined to repair it. Brought tv home, and now heard the relays cycling. So I got a power supply board and swapped it out from an online company that repairs boards (tvparts for less on ebay?). Afterwards, no more relay clicking. So now I proceeded to get a seine board - as many said it went bad too - and just replacedit but still have the blinking red lights (3 times). Could use some help troubleshooting - as I feel I am on a Easter hunt - and do not want to keep replacing boards without pinpointing the problem. I have the tv back off and ready to start unplugging boards and checking what can be done. \012Help - thanks.\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My toshiba 42hl196 popped when I turned it on last month. 3 blinking lights. Brought to tv repair - they say it was the power supply and tried replacing the ICs with a kit - did not work. Said coul

... Toshiba 42HL196 42 in. LCD HDTV

Vertical line i own a toshiba tv when powering up only vertical line appearing on the screen, i try to rectify by doing some resoldering on the pcb and replacing the vertical ic ta8403k and several electrolytic capacitors but nothing change,the sound and channels are fine the dc supply for the ic is 25vdc and i think its normal,are their any solutions to rectify this problem on my tv set.i need suggestion thank you

Check the deflection yoke connection cable for any loose contact at its connection socket at main board side. Unplug the connector out from the socket, and re-plug it back for at least tow times. Check the solder terminals of all connections to hor ... Toshiba 32A43 32" TV

When power supply to TV exceeds 224V the TV switch off. It then tries to switch "on" again and will do so until the power supply to TV is lower than 224V. I ran a AC DC regulater to keep power output to TV as close to 220V. Then TV plays perfect. Aventually I unplug TV and go to bed. I have tried UPS's as well. Same problem. I think power supply unit in TV is damaged due to power surges. I replaced this 2 year old TV with a new one. Costly excercise. I still belive this TV can be fixed.

If a power supply is what you want, they are available all over the world, just use the internet like you did tonight and use Google, type in your tv make and model and power supply and you will find them. Parts are really hard to come by now the Qua ... Flat Panel Televisions

I have a Sanyo DLP 50747. When I turn it on It clicks off in about 10 seconds. I read online to try replacing the sub-power board(part# SJ-B10N2010A) and if that does not work then replace the power supply board (part #LJ41-05246A) both of which I purchased from Shopjimmy.com. I replaced both and it still does the same thing. Can anyone give me any other suggestions?

Sanyo plasmas have LEDs on the boards that can be used to identify the source of the problem. Are LEDs on any of the boards lit> If yes then which ones? ... Sanyo DP50747 50 in. Plasma TV

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo

Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

Dp46480 46480 was hit by lightning. lost power, and replaced the power supply. it turns on now but the screen goes black after about 15 seconds. any suggestions or help on what i should try to replace next?

... Sanyo Flat Panel Televisions

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the

If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

I have a Sanyo TV #DP46848 that has no power. I have replaced the power supply with no results. Do you know what else I can try?

This is a common problem with Sanyo televisions. This is a faulty main board and it gets even worse. Sanyo does not use a standard main board in their models. You will need to look at the main board (this is where your HDMI cables plug in) at the bot ... Sanyo DP46848 LCD TV

The IC regulator of power supply with 5 legs of my JVC tv Model AV-21QMG7 was burned , and i can no longer read the no, of the IC regulator , can you give me the no. of that IC regulator so that i can buy it for replacement?

... Standard (CRT) Televisions

I have a Phillips 32PFL5322D/37 tv that is about 2 1/2 years old. Recently the TV stopped working. All I see is 8 red blinking lights when I try to power-up. After reading multiple threads and suggestions I replaced the Power Supply Unit but still no change in the 8 red blinking lights. I have a power aux board coming in the mail and I plan to install. I am out of ideas here. Any other possibilities? It seems everyone is having the same problem with this TV. There must be a reason.

... Philips 37PF7320A 37 in. HD-Ready LCD Television

I have a samsung lcd tv model LNS-4095DX/XAA. I am getting snowy particles throughout the image. The picture looks great except for the pixel looking particles throughout the screen. I have already replaced the power supply due to some bad capacitors. It was alot worse before the new part. Do you think it is the T-Con or main board that needs replacing? I checked all the connections and tried different cables to see if it got better, it did not.

... Samsung LN-S4095D 40 in. LCD HDTV

I have a Sony Bravia KDL 46W5150 that I just replaced the main board on because of the tv powering itself off and continually trying to come back on by itself. My next set is the power supply board has anyone else had this issue?

... Flat Panel Televisions

Power will not tour on Samsung T220HD model. I replaced a bulging capacitor on the power supply board and still will not turn on. I also tested the fuse with an ohmmeter and the fuse was good. any ideas what to try next?

... Samsung T220HD 22 in. LCD TV

60pp9753/17 replaced convergence ic chips power light comes on blinks once but no picture or sound. checked power supply slight humming noise coming from the ssb area small red light on the circuit board by the ssb

Soldering or bad IC chips...\012\012Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. Repair kits ... Philips 60PP9753 60" Rear Projection Television

Hitachi hdtv - replaced SDR upper board a year ago and tv was ok. Replaced the SDR- lower board and two swollen capacitors on the power supply board. Now the tv works with picture and sound, but I have a 4" band of green snow accross the upper section of the bottom of the screen, and green and blue lines on the upper section at the top of the screem. Tried a million times to reseat all the ribbon cables. Any ideas?

... Hitachi P50H401 50 in. Plasma HDTV

Tried replacing power supply still no power any suggestions

The set needs to be professionally diagnosed !!! Are you sure the power supply board you bought was working? If the power supply board is a good part, the you're looking at a main board issue. ... LG 42LC2D 42 in. LCD HDTV

I need a replacement power supply cable for my Amethyst iPig - any ideas on where I will get one? (tried looking on EBay and nothing came up)

... Flat Panel Televisions

Hitachi l42vk04u TV will not turn on, the standby light is constantly flashing red & blue. Tried everything other than replace the power supply board. HELP!!!!!!

... Hitachi Flat Panel Televisions

I'm trying to fix my Viewsonic N4825P. I have narrowed it down to the power supply since every time I replace the fuse and plug in the tv, the fuse blows. The fuses I am using are 5A 125V. Do I need t

I would suggest trying what is called a slow burn fuse of the same size, if there is something wrong with the power suppy then the fuse will continue to blow I would not recomend a higher amp fuse as this may cause other things to fry in unit. ... Flat Panel Televisions

I replaced my convergence chips in my mitsubishi projection tv, the convergence is still out and does not move at all when I try, also there is still the bow tie - the top and bottom center pull in. Did i get bad chips or could the power supply be bad? not sure please help??

Hard to say what might be the problem, but I would be checking for the following:\012\012a) verify all fuses (pico fuses) are not blown. They look like yellow, or green resistors typically and should be marked with some sort of "Fxxx" de ... Mitsubishi Projection Televisions

My JVC LT-26X575 will not power on. Opened it up checked all connections and got it to power on. Screwed it closed tried again and again no power. Replaced power board tested with tv still open. First try powered right up. Each successive try took longer to power up. After about 4 tries would not turn on at all. Suggestions please.

... JVC LT-26X575 26 in. LCD HDTV

I think I shorted out the power supply board on my Onkyo HT-R667. I was replacing some the capacitors to repair a hdmi switching issue. I was testing the repair with the top cover off. While it was powered on I accidentally touched the metal top to the top of the power supply board CMKM-P3X. There was a spark and the unit turned off. It won't turn back on. No lights. Can it be fixed or can I purchase a replacement board if this is even the issue. Thanks

... Flat Panel Televisions

Replaced upper y buffer, replaced caps. on y board, and x board new power supply board now clicks and blue flashing light 5-3

... Samsung HPT5054 50 in. HD-Ready Plasma Television

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that

... Spectroniq PLTV3250 32 in. LCD TV

Samsung 52 lcd wont turn on and i have replaced power supply

... Samsung LNT5265F 52 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1232 seconds