Having problems with your Flat Panel Televisions ?

Toshiba TV model 42AV500A channels keep changing randomly. Even when in HDMI mode it will switch back to DTV and then continue switching channels and not locking on to any single one. Occassionaly it will lock on a channel for a few minutes then it will continue to switch channels. I tried factory default restting and changed batteries in the remote. Also I turned off TV and unplugged and restarted. Still does not help.

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Toshiba TV model 42AV500A channels keep changing randomly. Even when in HDMI mode it will switch back to DTV and then continue switching channels and not locking on to any single one. Occassionaly it will lock on a channel for a few minutes then it will continue to switch channels. I tried factory default restting and changed batteries in the remote. Also I turned off TV and unplugged and restarted. Still does not help.

... Toshiba 42AV550 42 inch HDMI Multi-System LCD TV

Hyundai 32 Television was working fine until a few minutes ago. I tried to change the channel and since then it has started switching itself to and from standby. TV Switched on for about 3 seconds with channel 21 showing in the top left corner before switching itself back to standby again. the strange thing is that it will switch itself back on from standby. Anyone know what might be causing this?

That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally connected to the power co ... Flat Panel Televisions

I have a 27 inch, RCA tv model number f27625 and I have lost the remote for it. I need to get the tv switched to input/video but there is no button on the tv (front or back) to do so. I know I can get a universal remote but I don't have time for that now. Any ideas are appreciated. * 28 minutes ago * - 4 days left to answer. Additional Details tried changing the channels all the way through and it just cycles through them again with no luck...thanks anyway 10 minutes ago The

... RCA F27625 27" TV

PLASMA Model # TH - P50VT20A The red PWR light is flashing, It will not respond to the remote, the remote has NEW batteries and works BUT the TV power on swith on the side of the TV is in the ON position, if I turn the TV power switch off/ON the TV starts but only goes for about one minute!! I tried to reset the auto tuning, it starts tuning then when the first channell is selected, THE TV TURNS ITSELF OFF., with the RED power light flashing 11 times, pauses then repeats the flashing sequence a

... Panasonic Viera TH-50PZ800U Plasma TV

Samsung HL85688W DLP TV. Turned on the TV .....channel came on, color is good and audio is fine. Changed channels and found it was only getting 3 channels. Tried changing "source" got black screen until I got back to the 3 channels. Unplugged TV for 50 minutes to let it reset ..........turned back on and have the same problem. What do I try next??

... Samsung DLP HL-P5663W 56" TV

I have a Dual LE32PVR0801 32 inch TV. I left it on stand-by (as usual)a couple of nights ago and now when i switch it on the egg timer stays on the screen as if the hard disk is warming up and wont switch to the freeview. What can i do? I tried turning it off for a minute putting it in stand by for a minute and then switching it on but it doesnt work!

... Combination Televisions

Hitachi L42X03A- the tv is stuck on a channel thats snowy.for some reason it wont let me switch to the menu or anything else. when i try to turn channels or even turn it off it will not work. a messag

... Hitachi Flat Panel Televisions

The TV works however I cannot get the set to read the channels. I have cable but no cable box. Have tried to program it for over 3 hours. I've tried it using ch.3 and ch.4. through the remote. After I scan the channels, it tells me none were read. My other TV's work, so it's not the cable company. I even plugged the plug for about 30 minutes.

Check you cable or air settings. I would try cable setting first then scan channels, if that doesn't work I would try air and scan.I am not sure cable setup.\015\012also check tv input settings. the lcd's have an input selection button. it will ... Flat Panel Televisions

My thomson 20LB020S4 tv will try to switch on from standby, so times it will but i only get a picture for about 30 sec. other time it doesn't finish booting up. If and when i do get a picture when it switches off i still receive sound. I have tried a factory reset.

... Flat Panel Televisions

Samsung TV Have a Samsung LN32A450 TV that the other night switched from component 1 to channel 3. Channel 3 has snow and the message "weak or no signal" in the middle of screen. Tried resetting cable box which didn't work. Called cable provider and was told it was the TV not cable. Have 2 other TVs in house that are unaffected. Tried unplugging TV for 5 mins which corrects problem but for only 30 mins or so. Last night volume on remote stopped working,all other buttons on remote work,and vo

Based on the information you described you may have a tuner circuit problem or power intermitent faikure fron the power supply module. ... Samsung Flat Panel Televisions

I am having 21inch CRT BPL color TV. when i switched it on channel is coming and its automatically tuning and only grain are coming.. (means missing channel) I tried auto tuning,semi autotuning and manual tuning its not working. But Fine tuning is working until i stick to one channel. howerver if i change the channel , same problem occur.. Please help me in this regards

Check and replace its main system memory IC. It is faulty. ... Standard (CRT) Televisions

Luxor tv trying to change chanel on number keypad, tv recognises the numbers but doesnt change to selected channel. have switched off at the mains, and no joy. the only way to change channel is to bring up the channel description and scroll to the channel wanted.

Sounds like the main system control memory IC has damaged. Replace the same and check. It is a very small IC, having 8 solder terminals. Very cheap, and easy to get. Will look somewhat like this. ... Standard (CRT) Televisions

Samsung ps42s5h hi, I have a tv that when i try to power on, just give me a sound when tv try to start but no switch on. And the tv continue trying to start but with no success. Do you know what could be the cause? Best Regards

There is some short circuit inside one or more circuit boards inside your TV. It need a thorough check up It is a skilled work. If you wish to get more details, surf the\012following link. There are over two thousand and four hundred posts. All ar ... Samsung PS42S5H 42 in. HD-Ready Plasma Television

The TV seems to take ages to turn on, the red on/off light flashes and then goes off completely and the screen stays blank. It then switches on again and after a few seconds/minutes will switch back off. Eventually it seems to warm up and stay on. On occasion it will take up to 10 minutes for the TV to warm up and switch on. Once on there is no problems. I have not tried fixing this as I feel it may well be a job for a qualified technician. Please advise if the TV is safe to use, and what's need

Hi,\012This is an indication of out-of-regulation in the power supply section. The very common caused of this fault is the leaky electrolytic capacitor in that section. It will drop the supply from no ... Samsung LE32A457 32 in. LCD TV

Rechannel tv GVA PDP3208- stuck on 1 channel only. I tried to follow solution: menu>picture>mode(enhanced setting only)>power up(max)>exit and then go back and use auto install, but still one channel coming out even if I switch to other channels.

... Flat Panel Televisions

I have samsung lcd tv LA32B. A couple months ago, the tv worked well. Then something went wrong. I had to wait 5 minutes to see channels appeared in the screen. A month ago, my tv could not display all channels. I have tried it to re-setting channel, but it did not work. What should i do? I appreciate any help and assistance from you.

... Samsung Flat Panel Televisions

This tv switches to menu screen wile watching any channel. Some times the tv will not switch for 5- 6 hours but once it switches to the menu screen, then I turnof the tv and it will reset to watch tv again but then wsitches to menu screen in a few minutes. Can someone help me.

I have the same problem on my TV, and it seems like the menu button on the side panel is stuck. ... Philips 37PF5321 37 in. HD-Ready LCD Television

How do I return my Matsui M22DVDB19 tv to factory settings or initial set up as I have lost channels and when I try to retune it it will oly go to 21% then stops. Thank you, Tina Nunn

... Flat Panel Televisions

Hi. My Sony KDL32EX400 started to have unusual problems few months ago. Channel, volume, menu, setting, controls stop functioning. (The little green led is flashing when trying to switch channels or control volume, but nothing else happens.) The only function works is the power. After I turn it off it shuts off but sound remains for another 30-40 seconds. Also sometimes display info remains on screen after TV turned on then the same problem happens, as mentioned above. I have to note that it do

Hi,Does Standby light flash/ blink on tv when it does not show picture or any display in screen?If standby light blinks, please count how many times it blinks after three seconds long pause to diagnose possible problem in tv.And if ... Flat Panel Televisions

The TV will not display any channels. Have tried resetting and back to factory settings with the help of Toshiba online but nothing. Have scanned for channels - nothing. It isn't a fault with the

Check and replace its tuner. It is faulty. ... Toshiba 26AV713DB 26av713b Regza Av 26 Inch Hd Ready Lcd Televisi

The picture on my tv has gone like an orange dull colour on every channel. I have tried switching it off by the remote and plug, resetting everything, unplugging the connections from the back and putting them back in. It has been switched off for a few days now and still not working. What will be wrong with it/

... Flat Panel Televisions

I have tried to retune my acoustic Solutions freeview tv/dvd player (model astvd-31199-s2-id-hd), and it is now unresponsive. I pressed 'tv menu', selected 'settings' and 'auto retune'. It seemed to work, I.e., it produced a progress bar which over a few minutes completed. Tv then went black, and standby led began flashing. The tv will now do nothing else. Unresponsive to pressing remote buttons or tv buttons, won't even switch to an alternative mode (I.e., dvd mode). Tried unpluging and even re

... Flat Panel Televisions

Vc3207 v7 tv/combo dvd player, turn on tv, worked, changed channels, worked, when back to orginal channel, stayed on for a couple of minutes then the screen went black, the little red light came on. tried turning tv on manually , nothing happens. unplugged tv from wall, after 5 miutes repluged , still the same, nothing works except the little red light in front. regards brian

... Combination Televisions

Hi Have a JVC tv. Suddenly channel 1,2,4,5 and 6 not working the rest of channel are fine. Everytime I press those numbers they are clear the it switch off after a few second.

The tuner to your tV has damaged in terms of VH reception. It cannot be get repaired. Must replace with same type and number. ... JVC Standard (CRT) Televisions

I have a Vizio XVT553SV that powers up but nothing on the screen. The Vizio logo flashes org to white for 1.5 minutes then the V comes on the screen for 1.5 minutes. It will repeat this over and over. I tried the factory reset and it didn't work. I have the back off and no capacitors etc look bad. I could check voltages but the are a lot of wires coming from the power supply and I do not have a schematic. Any suggestions ? Thanks

That problem sir is usually cause of faulty inverter board...Try to replaced inverter board to fix your TV.. ... Vizio XVT553SV 55 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1461 seconds