Having problems with your Standard (CRT) Televisions ?

Toshiba 32a33. I'll be watching tv and the volume bar shows goes down to 0 (no sound) when it is in this mode the remote control will not work on the volume, you can get up and manually up the volume but as soon as you let go of the volume + button. The volume climbs back to O (no sound). Every once in while it will repair itself and life is good, well it's now back to it's old tricks. I have tried unpluging tv, putting new batteries in remote control, don't know what else to try. HELP I think i



Answers :

1st check to see if your remote volume down button is stuck. 2nd do you have wireless internet (router) or any other wireless devices phones,ceiling fans, another Toshiba remote, if so try unplugging them (or remove the batteries if it's a remote) while it's changing the volume one at a time. If a different device makes it stop try changing the channel on it. Also make sure the t.v doesn't have a mind of its own and remove the batteries out of the t.v remote, let it ride for a couple days if it happens without the remote being in play then you know your t.v is acting strange, if it stops then starts back up when you start using the remote again then you know your dealing with a remote issue. Sometimes Freq.'s merge causing remotes/wireless devices to conflict with each other.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Toshiba 32a33. I'll be watching tv and the volume bar shows goes down to 0 (no sound) when it is in this mode the remote control will not work on the volume, you can get up and manually up the volume but as soon as you let go of the volume + button. The volume climbs back to O (no sound). Every once in while it will repair itself and life is good, well it's now back to it's old tricks. I have tried unpluging tv, putting new batteries in remote control, don't know what else to try. HELP I think i


1st check to see if your remote volume down button is stuck. 2nd do you have wireless internet (router) or any other wireless devices phones,ceiling fans, another Toshiba remote, if so try unplugging them (or remove the batteries if it's a remote) wh ... Toshiba 32A33 32" TV

What's your problem?Our Samsung TV, Model LE32 R 7 1B (R) C has problem with sound. The sound randomly fluctuates between zero and maximum without prompting. In addition, the TV is unresponsive to remote control commands, such as on and off, volume, menu, etc. Our TV is almost 6 years old. Could someone please help? Many thanks.


... ViewSonic NextVision N2010 20 in. LCD Television

Remote sensor on tv not responding I,have to turn on tv manually. change input manually,tv reception is ok. Volume cannot be controlled,it will lock in at full volume or drift back & forth,mostley full volume. If I use volume buttons on tv , it changes input (video 1 pc hdmi & so on) Once in a while setup screen will appear then disappear. I have changed batteries in the remote, I don't believe this is the problem.When tv is first turned on the volume icon at bottom off screen will go from 0-60


Have you checked your remote to see if its working? If you have a digital camera or camera phone, point the remote at the lense and see if it shows up on camera screen. If it is working then the IR sensor on the tv could be bad. ... Sylvania LC420SS8 LCD TV

Volume control Can't seem to get the volume control up to the maximum. Can get into the sound menu everything is highlited except the ADV line which allows you to increase the volume, when scolling down to this it just misses this an d goesa back to the top of the menu.


... Insignia Flat Panel Televisions

M26ivp remote does not control tv. cannot turn tv off or change volume with remote or control on back of set. changed remote batteries twice with no results


... Vizio Flat Panel Televisions

I have a logik L26DIGB1 26" tv and although i can change chanel through my sky remote i have to use my tv remote to control the sound how can I use my sky remote to control the volume


You need to find another code for the sky remote to control your TV. ... Flat Panel Televisions

I have a LG 42LC2DB when u first turn on tv all is fine remote wrks can change sound and channel no problems, but then all of a sudden the remote stops working cant change channel alter sound or anything. and also when the remote stops workin so does the controls on the side of the tv for channel, volume etc. please help


Have you tried changing the batteries? ... LG 42LC2D 42 in. LCD HDTV

Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu


I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ... Samsung 50 in. Plasma TV

I have a 40 inch lcd techwood tv 3 months old ,yesterday after linking laptop to tv with hdmi cable an error occured and now the tele has no sound atall how can i get the volume back can anyone advis


... Flat Panel Televisions

TV is stuck on HDMI input and can't: adjust the volume, change the channel or switch Iinputs from the remote or the controls on the TV. None of the TV controls are responding with the exception of the power button on both the TV and the remote. I have tried unplugging it, waiting and turning it back on to no avail. Any suggestions?


... Westinghouse W4207 42 in. HD-Ready LCD TV

The tv menu screen keeps popping on and off when watching TV. Sometimes the sound volume control screen will appear but you cannot control the volume. The set is only 4 months old.


It should be under warranty still but if not and menu comes up on its own I would suspect a problem with the keyboard where the buttons are---they may look and feel fine but they usually are the cause of this kind of problem----In several cases I hav ... RCA 32" LED HDTV LED32B30RQ - ON Corp US, Inc

Neither I nor comcast can find a code to work everthing on this tv. The comcast universal remote will not control the sound. We have to use the rca remote to operate the sound volume.


You are best to try these common codes, 02429 and 2288. Either one of them could work. ... RCA L32HD31 32 in. LCD HDTV

I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help? (I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)


... Flat Panel Televisions

TV turned on with the remote this am and then was unable to change channels, adjust volume or turn back off plus manual controls on the TV do not work either. Had to unplug to turn it off. If you hold the ON/OFF button on the TV for about 10 seconds it turns on and to turn it back off you need to hold the ON/OFF button another 10 second and it will turn OFF; however when you let go of the ON/OFF buttons in a few seconds it will come back on.


... Panasonic TH-C42HD18 42 in. Plasma TV

I have a LG 42LC5CAUS, when I turn on my set there is no sound, sometimes if I turn the set off and back on I will get sound. It has gotten worse and now I have to reboot to get the sound on and the remote may or may not control it. HELP


Hello,\012\012\012You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where, if otherwise, Your power supply board is dead, u know basic electronics' and soldering? Most of t ... LG Flat Panel Televisions

My 42 inch Pioneer 720p plasma display stopped playing sound last night. The picture is fine. We have checked the setup settings and they are OK. Just no sound. We tried the remote mute, minimum volume, etc. and that's not the problem. We simply have no sound. Any ideas? Unit is 4 years old, long out of parts/labor warranty.


If you tried all the basic procedure try to check the speaker. Remove the back cover of your tv and try to look for the speaker, when checking the speaker you should remove the terminal that connects the speaker so theirs no other resistance will be ... Pioneer Elite PRO-950HD 42 in. Plasma Television

Volume increases to 100 or drops all the way to 0 when pressing the volume button on either the remote or back of the tv. I can't control the volume I want.


Keyboard issues and answers:A problem that is more common than most people think is anissue with buttons on the controlkeyboards of modern TV sets.Recently for whatever reason I have seen more questionsabout this so I have composed this answe ... LG Flat Panel Televisions

I have a 2 year old LG 42LCD TV. When I turn my TV off and then later turn it back on again, the infa red light just continues to flash on and off and the screen does not turn on. The only way to stop this is to take the plug out for a few moments and then plug it back in again. The TV then turns on when using the remote control,


Tv is devloping a power supply board problems,that the board,where the power a/c cord plug into it.U have all the tools also can do basic soldering and understanding basic electronic?Take the tv aparts,check power supply board carefully looking for c ... LG 42LC2D 42 in. LCD HDTV

OK, following your advice of March 9th I got a new lamp from Mitsubishi and replaced it tonigh in my Mitsubishi rear projection model WD-62725 TV. The old lamp was clearly broken. However I have installed the new one, replaced the front cover, etc., etc. and when I plug in the TV I hear a faint whirring sound on the far right (as I face the front), sounds like a cooling fan probably, but when I press Power either on my remote control or press the Power button on front of the TV, nothing happ


Hi,\015\012That sound may from the color wheel. Open the angine, open block front of lamp. \015\012\015\012\015\012\015\012open co ... Flat Panel Televisions

I have 50 inches plasma Hitachi TV (ALiS 1080HD). As the TV was on, the screen stopped showing (no picture) and no sound could be listened as well, without any reason. The power light started flashing (on and off) so I turned the TV off from the power supply (as the remote control was not responding). Few seconds later when I turned the power supply back on for a moment I heard a sound (making me believe that the problem was fixed) but once again the power light started flashing with the same en


... Flat Panel Televisions

Our Samsung TV, Model LE32 R 7 1B (R) C has problem with sound. The sound randomly fluctuates between zero and maximum without prompting. In addition, the TV is unresponsive to remote control commands, such as on and off, volume, menu, etc.


... ViewSonic NextVision N2010 20 in. LCD Television

My 23pf9966 doesn't recognize the HD cable input (no cable picture). I can change the channels & volume, but all channels are just snow and no sound. There is one channel that is blank, but no volume control comes on. Just a black screen. The channel seems to change, if it's the blank one and I count up 2 channels, then go back, it will be snow again. What is going on??


The tuner - the part that actually selects the channels from the signals on the cable - has failed and it will have to be replaced.\012\012\012This involves careful desoldering of the old part, the purchase of a compatible replacement and its v ... Philips 23PF9966 23 in. HD-Ready LCD Television

Had this TV for a couple of years now. We bought it new. It has started switching itself on and off standby. When you press any button on the remote control the screen goes black then comes back on again a couple of seconds later Cannot turn volume up or down for this reason Cannot access the in-built programme information We could switch to HDMI and watch things on the playstation last night, but now it has stopped allowing us to do this too. Changed batteries on remote Please


With no make or model, it is a little difficult to try and decide what the problem might be but, I would disconnect the touch button panel on the TV, if it has one. That could be the fault. ... Flat Panel Televisions

How to I set the volume lock on my vizio xru9m remote to control the volume on my dvd/surround sound reciever


I have the same problem. Tech support said the remote doesn't have that feature which I think is total bs given that is one of the more important features you can have. ... Flat Panel Televisions

Our remote died to our Vizio ....checked batteries, etc...have been having problems for a while...bought a new universal Vizio remote...keyed in all the numbers....last four work...but still is not working..took it back to Walmart..he got it working in some Tv's down there...keyed in the 1000 and said it would work in our Tv...still doesn;t...manually adjusting the channels and volume, etc is difficult...is it our TV or what? The Tv is about 3 - 4 years old and works fine otherwise


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1468 seconds