Suggested Questions/Answers :
It is recommended you read all this kind of situations
My Thomson 27 LCDB 03B 27 in, keeps turning off after prolonged usage. The picture will go off but the sound remains. If i put the the tv off and on again it will work for a few minutes then the picture goes off again (screen turns black). If i feel the back of the tv it is very hot. Can someone help please. Thank you!
You have a back light problem either the invertor is faulty or the screen ...
Thomson LCDB 03B 27 in. Television
My rca r52wm24 Tv turns on but after about 20 minutes the screen goes black but I still have sound. Sometimes the picture will come back up and work fine after 10-30 minutes but it will go to black screen again. Then sometimes the picture will be fine for around 20 min utes agin flash to black then flash right back to normal. rnWhennthe screen does go to black it slowley fades out takes about 10 seconds to go black
Hi mcpheeters16,\015\012\015\012First to isolate the loose connection from fault, check the cable connectors from the lamp and the ballast board. Pull-out the cables and then re-insert. Also check the ballast board from bad solder joints (crack ...
RCA R52WM24 52" HDTV Projection Television
I have a RCA L26WD26D Flat Screen TV. When you turn it on it will say "please wait". This lasts for 30 seconds or so. Then that goes off and the screen turns black with some sections turning white. It will vary the back and white and will stay like this for maybe 20 minutes. Then it will start showing vertical colored lines. They will change also and eventually turn back to black and white. After leaving the TV on for about 5 or 6 hours, the picture finally shows up and looks fine. So now I'm af
Hi coefremont,\015\012\015\012This is an indication of out-of-regulation in the power supply section. The very\015\012common caused of this fault is the leaky\015\012elec ...
RCA L26WD26D 26 in. LCD TV
I have a toshiba cinama series big black old school television. Now when we turn on the tv screen it just goes black w... as a quick fix i used to be able to hit the tv and the screen would come backand stay on...but now when i hit the tv on the back the screen will come back on for a few seconds then go black again and not stay on. I have a feeling something is loose in the inside of the television... When i remove the back panel what should i look for to tighten? I am a single mother with four
Toshiba 55H70 55" Rear Projection Television
Sanyo 24 in flat screen model DS24425 Screen slowly goes fussy and slowly goes black , a slight tap on the rear left side brings the picture back to good screen,for a few minutes or a couple of hours no set pattern of time. When one turns the set on again some times come on clear other times very dul or black, slight tap and good screen. Sounds /act like a bad solder connection but which one do you have a wiring diagram or know where to get one? Thank you
Hello\015\012Your flat panel TVs picture tube base board has soldering loose contact with it. Just unplug your TV from AC mains socket, and open it. Pull out the picture tube base card from the picture tube neck. Pull it out straight, no sha ...
Toshiba 55ZV650U 55 in. LCD HDTV
Lost picture Lately,after about an hr1/2 the picture suddenly disappears. I still have sound but the screen goes black.. no warning, just picture gone. new batteries in the remote. I shut the system down (set top box&tv) then turn it back on and so far the picture's been coming back. I've had the set since '05.I'd appreciate your input. Thanks.
Try unplugging everything and then plugging it back in. When my xbox had the "ring of fire" my brother asked me to fix it and I just unplugged and re plugged it worked and came back to life. (be careful that you either have the instuction menu for se ...
Protron PLTV3250 32 in. LCD Television
HI i have an RCA HD52W59 and the picture looks 3D, I can use the manual convergence but when tv is shut off and turned back on it goes back to the 3D look and the auto convergence does not work - the screen goes black and the green box startes in the corner but then just quits
Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instructions and repair support are avail from ...
RCA HD52W59 HDTV Projection Television
My kdl52xbr2 blinks to a black screen constantly every 5-10 seconds or so. Screen goes black for about one sec, then back to the picture. It continually does this throughout the time we're watching tv. It makes popping & cracking noises when you first turn the tv on as well. Can you help?
Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms. ...
Sony BRAVIA KDL52XBR2 Television
My philips 47" screen goes black tv still on. i have to turn tv off wait 10 to 30 seconds turn tv on and picture come back on screen.
Philips 47PFL7403D 47 in. LCD TV
Samsung TV LN40B500P3f - No Picture ; just audio
Hello, Our Samsung LN40B500P3f TV display is black; audio works fine. If I turn TV off and then back on the picture does display for a few seconds but then screen goes black and stays that way. Any suggestions as to what needs to be replaced?
Flat Panel Televisions
Mitsubichi VS 45609. When I turn the TV on sometimes it comes on and has beautiful picture and sound. Then after 1/2 or so it goes to a black screen. While on the black screen I am able to PIP it and see the the PIP screen with a clear picture. Also I can watch DVD's and play the games with a picture and sound. I for the life of me can not understand what is going. Why is it coming on and off? It either goes to a black screen or fuzzy like there is no cable channels. But I can have a beautiful p
I have the same TV and what is happing is the TV has 2 recievers in it to allow the PIP, So you have a power pack gone on 1 reciever the other is working, Your set has 2 power packs,1 for each receiver.\012I had both of mine go, 150$ a piece to ...
Mitsubishi VS-45609 TV
Have Philips 60PL9200D/37, having red light temp problem, fixed fans, fans are working just fine but sometimes after the tv has been on, red temp light comes back on and screen goes black, turn it on and picture comes back
Philips 60PL9200D Projection Televisions
I have a Samsung LCD TV - Model number LE37B679, which is great, but I'm having and issue with it.
I can be watching ok for a while and then the picture goes & I'm left with a black screen. The sound remains.
I find I have to turn the power off for 30 minutes or so then I get the picture back.
Does anyone have any idea as to what might be wrong. I read something about a T-CON Video board issue, but I'm not technically expert enough to know if this is a red herring or not.
Flat Panel Televisions
Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that
Spectroniq PLTV3250 32 in. LCD TV
Mitsubishi WT-42313 Rear Projection TV Last night my picture started to wobble, then the image shrank until i had nothing but a black screen, and the TV turned itself off. Now when I turn the TV on, the green light lights for a moment, then goes back out. Thoughts?
If the green light blinks count the blinks it tells you something ...
Mitsubishi WT-42313 42" Rear Projection HDTV-Ready Television
Our Sanyo plasma TV will be playing then all of the sudden the screen goes black still have sound. If you turn the device off then back on you have no picture or sound. After it sits for a long period it will usually come back on. What might be the problem?
Most common failure in the Plasma TV are these 3 boards: Power supply, Y-sustain, and Z-sustain.\012So look for blown caps with domed tops, fuses, semiconductors, etc.\012If you have the make and model, then go here to see what these boar ...
Sanyo Flat Panel Televisions
When I turn on the power button, the Vizio logo turns from orange to white. Then the screen goes from black to blue. But the blue screen only stays on for 1 second, pops twice and the screen goes back to black again. The logo also returns to orange. I already unplugged the TV, reset the power button for a minute.
Vizio VX32L Television
The tv turns on but will not show picture or sound screen goes black then back to blue. im using a reg cable cord from cable box, going to try and use the red yellow amd white cables next... hope it works
Try a DVD player etc connected to one of the rear audio and video inputs first to see if set is functional that way. ...
Flat Panel Televisions
We have an Astar flatscreen and every once in a while the tv will just change the av setting and then the screen goes black. It will flicker a few times like its trying to turn on but usually takes between two to ten hours to get the picture back. Any ideas?
Astar LTV-19BG TV
My LG flat screen tv is losing HDMI signal then goes black. I've tried to change to a different input but it won't change. After a few minutes of black screen it starts to flash a few times then back ti black. A few minutes later it will start connecting again and picture will come back on. Is it the tv or maybe my direct tv reciever
I have the same trouble too any fix yet ?? ...
LG Flat Panel Televisions
The screen has lines all the way across the screen and the right hand side of the screen is fuzzy and is like a double image "stretched " out.after on for a while it goes away and picture is normal. Does not come back again until turned off overnight and turned back on.
Toshiba REGZA 46RV530U LCD TV
Our Sony picture came on one day & after a few minutes the screen went black, the sound was still there & the stand by light was blinking away. After waiting awhile we can still turn the t.v on, the picture will apear, but after about 3-4 minutes the screen goes black with the sound still going as well as the blinking of the stand by light. It this something that easily be fix, or time to get rid of the tube & on to the flat screen. I really hate to see it go cuz we really - really love this t.
Often it is cold solder in c-board. have you tried to re-solder it..in few years of using your t.v it is normally electronics parts heats-up..then it will loose it contact from the base board or the PCB.if you have a basic electronics knowledge ...
Sony FD Trinitron WEGA KV-32FS120 32" TV
47LG50 screen light goes black after about 45 minutes of being on, sound still ok. Turn the tv off and back on and its fine for another 45 mins to an hour. The on/off light goes from red to blue-ish when screen goes black. As a note I took out the power board adn checked the capacitors and none where bulging or burst (someone said maybe they are drying out)...does that sound like the problem of is this an inverter board issue. I just want to change the what might be the most likely issue
Good day!That problem is commonly happens when the inverter board failed.But before you replaced that its better to check this out first.Just follow this simple and D.I.Y procedure on troubleshooting. ...
Flat Panel Televisions
I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when
I have the sanyo model DP46819 and the pic goes out and goes black so often but there is still sound with out picture. If i turn tv off and back on the pic comes back on for about 10 minutes then goes black again.
Your backlight controller is faulty and requires repair. It may be due to bad capacitors or faulty inverter transformers. ...
Sanyo Flat Panel Televisions