Having problems with your Flat Panel Televisions ?

Sylvania ld320ss8a power up problem.It goes on stand by after 6 or 7 blinks of the green power on light and back to red 5-6 seconds There is no sign of bad capacitors on the inverter CBA.after unplugging power from inverter CBA to the power supply CBA what should the power read under normal conditions coming out of the inverter? I am getting a pulsating reading of 0-117 volts about every 2 seconds.Any advice as to the problem??



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Sylvania ld320ss8a power up problem.It goes on stand by after 6 or 7 blinks of the green power on light and back to red 5-6 seconds There is no sign of bad capacitors on the inverter CBA.after unplugging power from inverter CBA to the power supply CBA what should the power read under normal conditions coming out of the inverter? I am getting a pulsating reading of 0-117 volts about every 2 seconds.Any advice as to the problem??


... Sylvania LC370SL8 37 in. LCD Television

I have anew Sony 40 inch EX 520 series Led warranty not valid in India since purchased in Bangkok. The power standby light goes of very often and the Tv goes dead. If I switch off the power supply for couple of minutes and switch it on again the stand by light comes back on and TV functions normally. The TV is also very sensitive to voltage fluctuations and on Inverter power supply. Please let me know what could be wrong and how to solve this problem. Thanks


... Flat Panel Televisions

Vizio GV47L...when i turn on the tv, the screen stays black. The vizio light turns white and it makes the click noise like normal but after a minute of it doing nothing the light turns back to amber. I can turn it on and off using my remote. I read other problems where people had to unplug there tv to turn it off. Mine will turn off. Would the problem be the power supply or the motherboard. The slave inverter was making a squeeling noise and i replaced it like 2 months ago.


... Flat Panel Televisions

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.


... Flat Panel Televisions

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

Sanyo DP42848 back light comes on momentarily then shuts off. I've changed power supply and slave inverter. Master inverter not available right now. Replaced power supply and both master and slave


... Sanyo Flat Panel Televisions

Led24a45rq hi, i have this rca led24a45rq that won't power on redb led light constant on, i have 12v coming from power supply to the main signal board could it still be power supply problem or main signal board tell me what you think it could be. or could it also be the back light inverter


... RCA LED24A45RQ 24 Class LED HDTV - 1080p, 1920 x 1080, 16:9, 800:1 Dyn

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

My hitachi 29in ctv power supply 110vac had a problem on zener diode will blown if we switch on the tv. what spare parts to change so that the power supply zener diode will not blown again and the supply voltage remain in normal condition.


The secondary output voltage comes out from is more than it should be there. That is why, the protection zener diode blows off, as soon as you switch ON the set. First find and repair the power supply regulator, for correct output voltage. Refer i ... Hitachi Standard (CRT) Televisions

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

Samsung LE46B650T2PXXC I have a 46" LCD Samsung Model Nr. LE46B650T2PXXC Version AC07. Not even 3 years old. It does not come on from standby. The LED Red light blinks 8 times followed by a longish pause and than starts blinking again. The night before I turned it off OK, and the following day it would not come on. I normally turn it off from the Mains supply. Do you think this is the Power Supply ? George


... Samsung HL-S5679W 56" HDTV

I have a Phillips 32PFL5322D/37 tv that is about 2 1/2 years old. Recently the TV stopped working. All I see is 8 red blinking lights when I try to power-up. After reading multiple threads and suggestions I replaced the Power Supply Unit but still no change in the 8 red blinking lights. I have a power aux board coming in the mail and I plan to install. I am out of ideas here. Any other possibilities? It seems everyone is having the same problem with this TV. There must be a reason.


... Philips 37PF7320A 37 in. HD-Ready LCD Television

My dp42849 not coming on the 12 volts to t.com are missing power supply has 24v. 15v. 5volt 12volt inverter on has 3.5 volts


... Sanyo Flat Panel Televisions

I borrowed a Sharp projector PG-M20X. When connected, the Power indicator (red light) is blinking but when I push on the button, nothing happens. Normally, shoud the power inidcator blink or not ? Does the blinking indicates some special condition. I have read the troubleshooting section of the operational manual and it is of no help. Thank you.


Red light blinking genreally indicates a problem with the bulb or the fan ... Sharp LC65D64U 65 in. LCD TV

RCA 32LA30RQ power light red at plugin , No function after that, dead, no key function. all supply voltages 2 volts under normal. Uses IPB733 inverter supply board RE46DZ1202. A schmatic would be a great help! Been a master bench tech for 30 years ,Still building my data base of new Bad designs.. Never ending fail by design.


... Flat Panel Televisions

FPE3206 - I have blue power led lit and no pic or audio. Thought it was the inverter but wasn't. Power supply has 5v. Did not get the 24v reading. I have 2 bad surface mount resistors on the main. So i'm looking at the SMPS and the Main. Any suggestions? Thanks, James!


The tv main Tuner signal board it is dead and it is the causes,if u have 2 burn surface mount resistors on it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole main Tuner signal board for the replacement. ... Audiovox FPE3206 32 in. LCD Television

Sanyo DP42848 back light comes on momentarily then shuts off. I've changed power supply and slave inverter. Master inverter not available right now. Suggestions?


... Sanyo Flat Panel Televisions

I have Samsung UN46B8000XFXZA LED TV. After power surge it will not come on. Plugging it in causes the blue power up light to come on for one second. The relay on the power supply (BN44-00270A) begins to click. The screen does not come on. All appears dead except for the clicking of the relay on the PS board ever few seconds.rnIf I unplug the connector from the power supply to the Main Unit Board (BN94-02661E) and apply 110v, the screen backlight comes on and there is no relay clicking. (


Yes based on your testing it appears that the power supply is at fault solely and you can opt to attempt a repair or replace it altogether. Unfortunately you will not be certain that the main board does not also need to be replaced until you have rep ... Samsung Flat Panel Televisions

I have a TH50PX60U with the red light flashing 10 times. I went through the diagnostic flow chart to where it said replace the PA and DG boards. I replaced both and still have the 10 flashing lights. SInce that flow chart didn't seem to work I started checking the feeds from the power supply. I noticed on the PA10 that as soon as I plugged in the AC, the voltage read 15V. Then the voltage started dropping fast and went down to zero. Is this normal or should the voltage remain at a cons


... Panasonic TH-50PX60U 50 in. Plasma HDTV

My 50inch vizio p50hdtv20a that was bought in 2008 is no longer working. It has no picture, but does have sound and obviously still has power. I need to know how i can fix this myself. If its a fuse thats gone out or what i need in order to make the picture come back on. Has there been any recalls on this exact model tv i have possibly? This is the second problem i've had with a 3yo tv set that should be in perfect working conditions. Theres a green light on the back of the set that reads LED+20


How much time does it blink?it can be your video model.i am not too familiar with that set.but the module is on the right side of the set as you open the back.the whole of the module has to be replaced. ... Vizio P50HDTV20A 50 in. Plasma HDTV

Hi, I have a Philips 42PFL7422D/37. Lately when I turn it on I get sound and no picture. If I unplug it let it sit, and plug it back in (sometime it takes several attempts) it will come on. Is it the power supply or the inverter?


... Philips 42PFL5332D 42 in. LCD Television

Plasma screen does not come on and power supply board is bad


When the Plasma TV is plugged in, there're a fewindications of normal operation. Knowing this will help usunderstand what's going on with the unit when anabnormality occurs.1. ... Panasonic Viera TH-42PZ85U 42 in. Plasma TV

Backlight inverters, or power supply issue?


... Westinghouse TX-47F430S 47 in. LCD TV

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that


... Spectroniq PLTV3250 32 in. LCD TV

I have a 22ins lcd tv/dvd combo when yhe power lead is attached the power light flashes very dimly there is no sound or picture. when i disconnect the inverter board both dvd and sound work and the power light is normal . obviously there is no picture at this stage as i,ve disconnected the inverter , would it be a correct assuption that the inverter is faulty ?


It is possible but a voltage check of the power supply will tell if it is bad or something downstream is pulling voltage down, power light going dim means something is really loading the supply down. ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1251 seconds