Having problems with your Flat Panel Televisions ?

Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.


... Sylvania LC320SS8 32 in. LCD Television

I have an older Mitsubishi TV, model VS-50605, that has been giving me problems. I am not able to consistently get a picture and/or sound through cable. All my other inputs work properly. I can play my Xbox on it and my DVD player works fine. Every now and then I get sound but no picture. On the rare occassion I get a picture through cable, it only lasts about 15 minutes at the most and then it cuts off. I've tried switching between ANT-A and ANT-B but had no luck resolving the issue. Any sugges


U have a pay boxes from those Telicoms,cables or satalites compannies?Yes,tries unplug,replug those boxes back about an hour later for it softwares to updates it softwares,should solved this problems or if not trade it in for a new box. ... Mitsubishi VS-50605 50" Rear Projection Television

My wt-46809 Still has a good picture. It receives its signal from an HD converter box from Time Warner Cable. The other inputs on the tv however don't seem to work. I can't use my DVD or hook up any game systems through the various inputs. In addition, while the HD channels (1000 and up) work, channels 1-999 don't project a picture (only audio). I've never added any HD retrofit to the set, so I'm not sure if true HD is being projected or if the picture is just very good digitally clear SD.


\012TV needs servicing PLEASE TRY THE BELOW FIRST THEN DO A FULL SYSTEM RESET\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets try your ... Mitsubishi WT-46809 46" Rear Projection Television

I have a Westinghouse LTV-32w6HD that has no picture but faint multicolor vertical lines that change according to the input (the lines change as the picture would normally change). I'm on HDMI input but have tried other INPUTs as well with no differences between them. Sound is OK. Remote works. Set powers up normally- just no picture. Where do I start? A schematic with voltages would be nice!


Two possible causes for that problem..1- T-Con board that drives lcd panel (screen) is bad and need to be replaced.2- LCD Panel (screen) itself is bad and replacement may cost you more than tv worth.Schematics in service manua ... Flat Panel Televisions

I have a mitsubishi ws-55315. Only the Composite 1 inout and monlink input with an hdmi adapter work, and only with certain components. the monlink works with my Dish reciever, and my xbox 360 work on the comp 1 input, but my ps3 doesn't work with either. I have picture with it, but the upper right hand corner is completely out of whack with a serious distortion and convergence issue. What is this?


Normally I would provide you with the 4 digit code to reset the entire set and restore all inputsI am away from home and do not have the information here===these sets have three hidden service menus==one for adjust, one for convergence and th ... Mitsubishi WS-55315 55" Rear Projection HDTV-Ready Television

My television is two and a half years old, and therefore outside of the warranty period. All of my HDMI inputs have stopped working, but the other video and audio inputs work fine. I have tried disconnecting the power supply and restarting, but they still do not work. Any advice on what could be wrong and how to fix it? I'm not afraid to work on the unit myself, but would also be interested to find out how much it might cost to fix.


\012Try using a new HDMI cable, unless you have verified that your current HDMI cable works on another television.\012If this does not fix your problem, I would recommend taking the television to a TV Repair ... Panasonic TH-42PX75U 42 in. Plasma HDTV

I have a Toshiba 51H84. I was trying to hook up my Xbox and the HDMI wouldn't work. Now the video works and the audio will work for about 30 seconds then the Audio cuts out but the video stays? Wondering if it's a problem with tehe HDMI input? It had a weird biz that screws into the back panel as has plugs but no other boards.


... Flat Panel Televisions

My LG 42LM620T Led tv has sound but no picture, what could be wrong.? One day, while watching TV suddenly the picture went off, but there was still sound. Thought I might have pressed some thing remote, tried all options but nothing worked. Switched off, removed the plug but still no change. When switched on I get LG log and picture for a second and then goes off, only sound stays. Tried with different inputs still the same. When flashed light on the screen I could see faint images. Opened up th


... LG 42LM6200 42 in. 3D LCD HD Cinema Smart TV

Sony KDL-40V3000 showing white(ish) image.? I recently got home from festival and powered on my TV only to find that the picture was all white(ish). When I say "ish" it's because it was white but with some light blue/grey shades, kinda like a negative picture but with no dark colors. I have checked that the issue is not with the input as I get it from my PC and my PS3 aswell.. When I change input the screen used to go all black, now its light grey, almost white. I tried disconnecting the po


Sounds to me like half an hour and an experienced eye will find and resolder the bad connections.Hope that helps. ... Flat Panel Televisions

I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still


It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ... Sharp Aquos LC-46D62U 46 in. LCD HDTV

I recently got home from festival and powered on my TV only to find that the picture was all white(ish). When I say "ish" it's because it was white but with some light blue/grey shades, kinda like a negative picture but with no dark colors. I have checked that the issue is not with the input as I get it from my PC and my PS3 aswell.. When I change input the screen used to go all black, now its light grey, almost white. I tried disconnecting the power over night and check again the next day. At f


Take a look for bad capacitors, but it's much more likely that there's a cold solder joint somewhere.I'd start with the power supply circuit (be careful, discharge all large caps first) and just retouchup all the solder connections on the large ... Sony BRAVIA KDL-40V3000 Television

I have an 11 year old Toshiba DVD player. The last 2 times I rented a disk I had problems. Everything seems to be fine through the previews. When the movie starts to play, the screen goes green. The audio is fine. The video is there, but everything is green. I try the DVD in another player and it worked fine. I tried it in my laptop and it worked fine. Has anyone had a sinillar problem as this? Is there a solution to this issue? Please let me know


This is usually an issue with the component cables running to the TV. Remove the cables and retry with different component cables. If this doesn't fix the issue, its a problem with the DVD player itself.As far as DVD players go, you've do ... Flat Panel Televisions

I have a Hitachi 42PD5000 with a digital box connected gives normal TV picture thru RGB connections. However an connection from paytv box to TV aerial input now gives sound but no picture. Worked Ok before. Tried connecting thru other AV inputs but no joy.Any clues?


... Hitachi Flat Panel Televisions

None of my component inputs are working i have hdmi hooked in for cable, a computer hooked in to the computer jack, and they all work fine. i tried my xbox 360 in every available input with the component cables and get no picture or sound i have used multiple sets of cables


Did you switch the Xbox HD switch to the off position? ... Sharp LC-C4654U 46 in. LCD TV

I have a HLR5656W Samsung. This question was asked before, but I never saw an answer. I have the same issue. "I have tried two different devices on the hdmi input and neither work. I am trying to find the part number for the circuit board that contains the hdmi input. Since I see no way to resolder or repair the connection I assume the board needs to be replaced? I was unable to get a part number over the phone. I was hoping to avoid taking the tv apart to get the board out and find the number


You need the service manual and you need to look at the exploded view to identify the board next\012go to the parts list if the part number isn't in the exploded view. ... Samsung HCM5525W 55" Rear Projection Television

TH-50PX77U inputs Only the coax and audio visual cable inputs work. the composite and hdmi inputs do not produce an image. the menu, and av cables are all in perfect picture, but nothing shows up when connected via hdmi or composite cables. thoughts?


Many times a computer's post screens will not show up a TV set, and once the computer itself has loaded the drivers and settings, the set may need to be shut off and turned back on for the HDNI or PC signal to be detected.It is also possible ... Panasonic Viera TH-42PZ80U Plasma TV

I recently moved and had my jvc big screen tv hooked up to direct tv through a hdmi cable i get picture but no sound I had this problem before when i had it hooked up the first time the direct tv guy messed with th tv settings and got it to work but i dont know how he did it and now ive moved and am having the sound issue again how can i get the sound to work on hdmi it works on everyother input channel


... JVC HD-52Z575 52" Rear Projection HDTV-Ready Television

My polaroid fxm-1911c picture is distorted, sound distorted with loud buzzing when I try to utilize the tv signal input jack, also the dvd player doesn't work


Looks like there are some partial defects in the TV and might need attention of a qualified service technician. Anyhow, make sure that the input cable, RC jacks and sockets all do not have any loose contacts. Go through settings and ensure that eve ... Polaroid FXM-1911C 19 in. LCD Television

HDMI Inputs don't work (and I've tested my components with another TV). When viewing on Component 1 input, the picture has blotchy color, like water colors. Adjusting color and brightness doesn't help. The tint control has no effect, and in fact, the tint slide looks funny on screen. The audio control no longer allows selection of the A/V external. The only setting it allows now is TV. Reset does not change the symptoms.


Hi,\015\012\015\012First lets re-initialize the AV Memories by following the steps below.\015\012\015\012Press the front panel "Guide" and "Format" key at the same time.\015\012\015\012Wait until the unit reboot and then try if the ... Mitsubishi WD-57733 57" HDTV

No audio on sceptre X46BV and picture is fine and tried different inputs and still no audio


... Sceptre X46BV TV

My Dell 42 inch plasma tv has an issue with the picture blinking on and off when using the HDMI input. All of the analog inputs work fine.


Plz check your cable which is connect between your cable operater and your tv or set up box and tv. Try this and attach cable should be properly. ... Flat Panel Televisions

My vi 42 in led lcd vizio works great for like 30 mins to an hour then the picture disapears but the audio is still intact and playing whats the issue has anybody else had this issue the tv is less than a year old


Good day!!!!That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally c ... Vizio Flat Panel Televisions

I have a vizio model GV47L FHDTV 20A LCD TV. We purchased it 4 years ago, this morning it began making a hissing sound while we were watching it. The picture also got dark and distorted. I've tried troubleshooting the problem and have realized that the sound remains constant regardless of the volume level, or input( even muted). I'm sure it's not an issue with the cable, because the problem persists with the cable box off. I've disconnected all inputs and and the sound bar, but the problem is th


... Flat Panel Televisions

Are there any further info about the problem of low audio and inputs does not work for L32WD250YX1? Oly one channel for the tuner has a picture the other channels has low audio only.


The problem you have mentioned is due to faulty digital and analog singal processing circuits. The simplest way to resolve this problem would be to replace the main audio/video board. If you would like to replace it yourself then please remove the ba ... RCA L32WD250 32 in. LCD HDTV

Can you help me with a new 32 inch Philips flat screen TV that I cannot get my DVD to indicate a picture, yet I do get audio. The model is 32PFL3505D/F7. I have downloaded the latest software release version, ZPBF2QA_078_0_3202, and still same results. The DVD player is an LG Brand, model DV172K. I have tested that on another flat screen TV and it works fine, yet with the Philips TV I just get audio and no video, and have tried several ways to hook up the wires. Still all same results. It jus


... Philips Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1650 seconds