Having problems with your Combination Televisions ?

Sylvania 13tv/vcr, has this code on the tv screen (8c1-0.19) when turned on. The TV has a picture,but no sound. The power supply seems to be okay, because when it is turned on it will play for hours,but without sound. There is intermittent use when the power button is applied, if it does not work the TV must be unpluged and pluged from the outlet to turn it on and off. Do you what this code is, and why is affecting the TV?



Answers :

The fact sound works for a moment when power button is held and that you have to unplug to turn off or on means not a circuit problem but that the set is likely in the tech mode or service adjust mode.

I think the best way to resolve this is call Philips (they are Sylvania, Magnavox, and Philips) customer service with the model number and talk to a tech (not the idiots in CS) who will know how to exit this and what the code means--code will tell the tech what is going on.


SD TECH

Repair Help & Product Troubleshooting for Combination Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Sylvania 13tv/vcr, has this code on the tv screen (8c1-0.19) when turned on. The TV has a picture,but no sound. The power supply seems to be okay, because when it is turned on it will play for hours,but without sound. There is intermittent use when the power button is applied, if it does not work the TV must be unpluged and pluged from the outlet to turn it on and off. Do you what this code is, and why is affecting the TV?


The fact sound works for a moment when power button is held and that you have to unplug to turn off or on means not a circuit problem but that the set is likely in the tech mode or service adjust mode.I think the best way to resolve this is c ... Sylvania 6313CE 13 in. TV/VCR Combo

Sanyo dp50747 TV turned itself on and will not turn on. The green power light located on the front panel lights up and the side panel off/on works but no sound or picture is shown. The front panel green light stays lit. The TV did this again about one month ago but I just turned it back on. Yesterday, it turned itself on and now does not turn on with the sound or picture shown. There is no sounds or odors from the TV. The power outlet works fine and the TV appears to be getting some power


Sounds like a mainboard problem ... Sanyo DP50747 50 in. Plasma TV

I have a mistubishi WD-Y57. I replace lamp 7 month ago, and now my tv doesn't work. I have sound but no picture. I took off the plastic grill from the back of the tv to see what it was doing when I tried to power it on. I see the fan turn on and see the light trying to cut on. It flickers light. It try two times before shutting down. If I see light flicking, does that mean the lamp isn't the problem? I tried to read the code light by holding those two buttons in front of the tv. But am not sure


WOULD YOU LIKE TO SELL IT ..LET MY NO LEE ... Mitsubishi WD-Y57 57" Projection HDTV

I have a Samsung HDTV model code is HLR4667WAX/XAA. It was working properly until one day it kept on freezing and then it popped. Now everytime i turn it ON, the screen is just BLACK with no sound and on the POWER BUTTON, the word LAMP is blinking. I dont know what's wrong with it. I took of the LAMP and nothing was wrong with it. By the way, i recently bought the LAMP. Can someone help me and tell me what might be wrong with my television?


... Projection Televisions

I have a Trinitron Wega 32HS510 that sometimes will not turn on. It sounds like it is going to turn on but shuts down immediately. The red light fast blinks either 6 or 7 times over and over again - usually 7 times. I have tried the recommended power reset (hold the up arrow button down while turning on TV), but that hasn't worked. Unplugging the power sometimes works...for a while. Later, the symptoms return. Any inexpensive ideas? I love the 170 pound TV but not enough to spend as much


... Sony FD Trinitron WEGA KV-32HS510 32" TV

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

I have a sharp aquos lc-c5277un. Both the power and OPC lights together blink twice. I tried unplugging it, holding down the volume up and channel down buttons while plugging it in. That left me with a solid power light on. I pushed the power button to turn it off and it turned off. Pushed it again to turn it on. It turned on and worked. 10 minutes or so later I heard a pop sound and the lights started blinking as before. This loop has played out three times. Is this the power board or


... Flat Panel Televisions

My Samsung Plasma 42 in. TV turns itself off after a couple of minutes of being on and then makes a clicking sound like its trying to turn on again but it doesn't turn back on. It just makes this clicking sound. If I unplug it, sometimes it will function normally again and sometimes the same problem occurs. We thought it might be the power strip so we plugged it into a different outlet. At first, this seemed to work. Then, the cable box and the sound system started turning off spontaneously


Try checking the standby mode. . . ... Flat Panel Televisions

I have a Vizio P50 HDTV20A, this TV is 2 years old this month. TV will not turn on in the morning after being off for hours. The green power light comes on and you can hear a sound like the TV is turning on but the screen in black, no picture, no sound. I ususally can get the TV to come back on after unplugging it 20 times but when it does turn on it makes a static sound, I see a quick flash of a grey screen and then the TV works. Any suggestions to what might be the problem?


... Vizio P50HDTV10A 50 in. Plasma HDTV

Panasonic projection tv model tx 43p950x, there is power loss while I turn on the remote and there is no power when I pushed the button on front of the TV. Before it happen I connect an audio cable on the back right above mark monitor, and the other end to my amplifier audio. Then I hooked up a magic sing in front on the TV. I turn the TV and the Amplifier, both is on, then I turn on the magic sing and it works and I could hear the sound in my Amplifier speaker and so in the TV. Now I turn both


... Panasonic Flat Panel Televisions

I have a 50 inch lg flat screen model 50pq30c-ua. my screen is black but i have sound. i hear clicking as if it wants to turn on. the on light turns blue and begins to blink. i changed the power board with a working one from another tv to see if is the reason it stopped working but it still doesnt work. what do you think is wrong with it?


... Flat Panel Televisions

Panasonic PT-47WX53 47 in. Rear Projection HDTV Television and the power will not turn on it just worked last night. I left it unplugged for an hour and tried to turn it back on and it stayed on for a minut and then turned off and the power light blinks several times like a code or something. Is this tv saveable i don't mind trying to fix it because it has been a great tv but just don't went to spend a lot on a old tv. Any help would be appreciated, thanks


... Panasonic PT-47WX53 47" Rear Projection HDTV

Philips Magnavox 9P6031C103 projection tv quit working 2 years ago (before, the picture began to shink and expand until it finally quit completely with no audio nor video -- turned it on two years later to double check the symptoms (whether there was any chirping sound) so we could order a repair kit and the tv worked perfectly fine for a couple of hours and then I turned it off, thinking the problem had worked itself out and no fixing was needed (must have been the bad Suddenlink connection th


Based on what you described I would say your TV has the "shrinking and expanding" fault. Its a common problem on that model and the symptoms can range from the video shrinking and expanding or no video or no audio....You can read more about this fix ... Philips Magnavox 9P6034C 60" Rear Projection Television

TV power wont turn on. At first I would turn it on and I would get the light to come on but no picture, just sound. So I would turn it off then back on again and it would work fine. Now I am not getting any power what so ever.


This sound like the power supply board is failing. The electrolytic capacitors on the board may need to be replaced.\015\012IF YOU KNOW HOW TO WORK WITH ELECTRONICS REPAIR(soldering ) or have a friend with knowledge/skill you can fix it ... Polaroid FLM-2625 26 in. HD-Ready LCD Television

TX-p42GT50B I bought this TV just last week and after working fine for about 5 days. I went to turn the TV on to play some xbox 360 this sunday evening and all of a sudden I heard several crackling pop sounds. I jumped in shock and the TV started power cycling on and of and would not get past the smart viera logo before turning back off then on again. Most of the time the TV power cycles as soon as you turn it on. When it does come on, I am unable to change channel, change to the av/hdmi s


... Panasonic Viera TH-42PZ80U Plasma TV

I have a Sony KF 50 WE 610 projection screen TV. It has worked perfectly since I bought it six or seven years ago. This morning I turned it on and the sound came on for a second, but then the sound went off and nothing else happened for about one minute. At the one minute mark it turned off by itself and the red indicator light blinked 5 times in a row... paused... blinked 5 times in a row... paused... and then blinked 5 times in a row again. When I powered it up again, the indicator light blink


Hello\015\012Five consicutive blinks at a time and the stops and again blinks five; is its self diagonosis procedure. All modern Sony sets has this function included in its circuits. If the system control IC inside it detect any fatal fault ... Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

TV worked great last night, turned it on this morning and the power came on, but I got nothing but a dark screen. No sound either and then remote or manual power button would not turn if off. I unplugged it for an hour, but it did the same thing. What do you think? Zack


... Vizio GV46L 46 in. LCD Television

Lg 42lh30 Tv runs well for awhile 20 minutes to an hour, then a click sound comes out of just the right speaker. Then the TV freezes and none of the buttons work on the TV. Once I cycle the main power switch the tv will not turn back on, thought a red light shows that power is available. I did some minor troubleshooting and found when I disconnect the T-Con from the main board, I do not ever get the clicking sound, my buttons always remain functional, and the TV seems to run fine (I can hear the


As per your detailed description, the fault should be of its T'Con itself. Replace it. There is no adjustments to be done after T'Con replacement. If you wish to get more details about how to replace T'Con board to an LCD TV, check the site linked ... Flat Panel Televisions

Mitsubishi 72 inch TV quit working. We turned it on, the picture came on, it made a loud pop and the screen went black. We disconnected it from the power or a couple of minutes. When we turned it back on it makes a scratching sound, you can hear something that sound like a motor slowing down. It does that about 4 times and the red light lights up.


... Projection Televisions

My Misubishi WD-52631 DLP TV is off sudenly. I turn it on again, but no picture, no sound, nothing happened. I reset it, nothing happends. the green power light blinks for a while, then shut off itself. when turn it on again, I can hear the fan is working, the power light is green, but it shuts off after a while.


Tv LED "LAMP" light indication is blinking?And ur tv projection lamp inside ur tv been used like 1 1/2 or 2 years.Yes.The tv projection lamp require changing,tv projection lamp life are ended. ... Mitsubishi WD-52631 52" Projection HDTV

Hi, My tv is am Australian SONY Bravia KDL46XBR - 3100, I purchased it in 07. My problem is when I try and turn my tv on there is sound for 30 seconds but no picture then it switches itself off with a 5 blink fault code. Sometimes the sound doesn't come on either, but also occasionally the TV turns on and works perfectly but it's very few & far between when that happens. I have an extended warranty with a 3rd party, but it doesn't cover lamp replacements so I want to make sure it is or


Hello,Below are the interpretation of Sony TV blinking codes, so check the one yours fall under. Also, note that your warranty would be void if you open the TV back or unscrew the TV back cover. And to fix this problem, you must open the ... Flat Panel Televisions

I have a Mitsubishi WD-73737 and when I turn on the tv the power light flashes very fast for a minute then stays a steady green and the screen is a solid blue. There is no sound as well. I have tried the system reset and it didn't do anything. I was given this tv, so I don't know how old it is. The tv will occasionally work but that is very random. The only item I have plugged in is an Xbox 360 with the component cables. The menu button does work so I know the screen still works.


Do you have the input turned on that you use the xbox for? Try different inputs as well. If you are getting the menu to come up, the blue screen is telling you that you don't have a signal being run through that particular input. ... Projection Televisions

LG 47'' LED. Model No. 47LE5310. Tv was working fine in the morning, was on for a couple of hours. went to turn it on later in the afternoon, but something is not right. there is power going to the tv. the power indicator light is on, but there is no picture or sound, just a black screen. tried using another power point, checked all cables and everything seems fine. Tv is about on month old. Any help will be greatly appreciated.


Just look to the picturebored sounding IC ... Flat Panel Televisions

The audio and picture on my vizio vt470m are scrambling and then the whole tv locks up and turns itself off. tried fixing with the "unplug everything, hold power button for 30 sec, and turn back on fix" that the vizio customer service people suggested but that is no longer working. this problem first appeared about two months ago and was fine until a few days ago. now the tv is turning istelf off and back on and there is no picture or sound. what do i need to do to fix it? or should i just


You could have Bad Capacitors on the Power supply board they will be vented or swollow on Top\0121000uf 16v 2200uf 10v 3300uf 10v.\012PTS they rebuilt boards 1-800-844-7871 ... Vizio VT470M 47 in. TV

My Akai LCT2660 is not connected to any devices. It has worked perfect for about 4 yrs. I was watching it for a couple of hrs. Turned it off for about an hr. When I turned it back on it briefly flashed a picture then I only had sound. Now if I turn it on it will briefly flash blue light on the right side. I checked the capacitor on the power supply and can't visibly see any bulging


... Akai LCT2660 26 in. HD-Ready LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3502 seconds