Having problems with your Standard (CRT) Televisions ?

I am having 21inch CRT BPL color TV. when i switched it on channel is coming and its automatically tuning and only grain are coming.. (means missing channel) I tried auto tuning,semi autotuning and manual tuning its not working. But Fine tuning is working until i stick to one channel. howerver if i change the channel , same problem occur.. Please help me in this regards



Answers :

Check and replace its main system memory IC. It is faulty.

1_9_2013_2_41_11_am.jpg

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I am having 21inch CRT BPL color TV. when i switched it on channel is coming and its automatically tuning and only grain are coming.. (means missing channel) I tried auto tuning,semi autotuning and manual tuning its not working. But Fine tuning is working until i stick to one channel. howerver if i change the channel , same problem occur.. Please help me in this regards


Check and replace its main system memory IC. It is faulty. ... Standard (CRT) Televisions

My RCA flat screen was working just fine and than as I was watching TV the screen flickered off and the it started flashing unusable signal. I did a rescan of the channels a couple come back that I have never had before. The sound doesnt work on the few channels that I do get and the picture and sound doesnt work on the ones I use to get. I also tried to put a dvd in. The sound works but not the picture doesnt. What do I do


... RCA Flat Panel Televisions

Although my tv is connected correctly, we have somehow got it "off" the correct channel I think. We don't use this tv often but a few months ago it worked fine. We have done nothing to it that I know of BUT now it just produces "snow". I believe it is on the wrong channel but I don't know what the correct one is. HELP, it is now spring break, the grandkids are coming. I need help! What is the channel to have the tv on to receive DishTV? If that isn't the problem, what else could it be?


If you have a standard dish receiver with only a coaxial cable to the TV, then probably the TV should be on channel 3 or 4. ... Emerson Standard (CRT) Televisions

The problem I have is that the cable barrel is loose & it has an effect on some but not all channels.....have to keep playing with cable wire to get it to come in good.....had cable company come & look first to see if it was cable but it is not...cable is working fine on other tv's in home.......is this a problem that can be fixed or should I try & exchange it for another one....Sharp Aqous lc-40d68ut......


If this input is loose this is something that is not repairable under the warranty so you will want to exchange this television before something untoward happens like the rf connector breaking off because you will be stuck if that happens. Plus when ... Sharp LC40D68UT 40 in. LCD TV

New LG 32LD350 - Allowed TV to auto-program channels, and for some reason, it skipped past channel 4 during the tuning process. When I select channel 4 in the tuning options, it comes up as no signal. On the old TV, channel 4 came in just fine - it is a local station that we have gotten for years. Other TVs in the house connected to the same antenna get channel 4 clear as ever...Any thoughts?


When you are auto tuning the system will not store a channel which is week by its standard ( at least 60% signal strength ) This done to avoid grainy picture and hissy sound.You can go into manual tuning and store it. ... LG 32LD350 32 in. LCD TV

My JVC HV-32D40 BK TV is not recognising any TV channel and if I select Menu and Setup to re-tune nothing displays at all on the screen. It was working fine and then I went to change channel and it stopped working. I cannot change to any channel or use the Guide. I can use the TV with my DVD player connected by SCART accessing digital channels and DVD.s. Any suggestion on how to reset the TV?


... JVC Flat Panel Televisions

I cannot get either Ch7 or Ch72 on my new Conia CE3201HDVDR. All the other channels work fine, since I bought an indoor antenna. Have tried both auto-tune and manual tune.


... Conia Flat Panel Televisions

Hi! I have a Sharp LC-37D7U and my cable company just started switching to digital at the rate of 20 or so channels per month. I was able to receive analog cable or digital cable through my analog cable receptacle on the TV, but only one or the other. So I put a signal splitter on the cable coming into the house and ran one line to each input and then it worked perfectly. I turned off the set and went to bed. Today I get no digital signal, only the signals from the remaining analog channels.


No it's not your TV set maybe you're cable company is not feeding the digital signal or having technical adjustment/problem you can inquire from them about the digital signal they are providing...and let me know it so we can proceed to other steps.. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

BAUHN I purchased the above TV at Aldi,s Liverpool store in Sydney 10/04/2013. When I set up TV the Guide (EPG) was working fine. For some reason the Guide (EPG) has now stopped showing any programs and says No Event Information and the same message when display is selected on the remote for the program you are watching. The signal strength for all channels is showing 4 to 6 bars and the picture is fine, I have tried Auto Scan again and tuned in all Channels again but this made no difference. W


... Flat Panel Televisions

When i play dvd i hear background music really clearly and voices are hardly audible - this happens on channel 5.1. if i swap to channel 2. i hear the filmmaker commentary! dvd was working fine until granddad came to babysit one evening!! using an lg dvd with lg home cinema speakers (lh-t550tb). Wierdly the pre movie trailers are all fine!


Sounds like the speakers are out of order and/or maybe 1 or 2 not connected. use a AA battery and "pop" each speaker wire. it's low voltage and amperage so it won't damage your speakers. but the pop will allow you to know exactly what speaker you hav ... Flat Panel Televisions

I have a JVC RM-C60 TV. I'm trying to tune it in to my Virgin Media HD box using a standard SCART lead but having no joy. It's completely failing to find the cable channel (or any other for that matter). TV worked fine when connected to a Sky+ box the same way, and cable is fine since it works when hooked up to the DVD player. Any ideas?


Tuning of the TV not required when using scart lead, just select external input that the scartis connected to, ie AV1,AV2 (EXT1,EXT2) etc. The problem is possibly to do with the Virgin box, it may be set to HDMI out in which case it will not output a ... JVC Standard (CRT) Televisions

My Sony KDL-52WL140 does not respond to any controls, not the remote, and not even the buttons on the tv itself. The only way you can turn it off is to unplug it, then, hours later, when you plug it back in, it is still stuck in the on position. It is tuned to a channel that gets only snow and static, and that's all we get. It was working fine, then started flipping in and out of various menus on it's own, as we watched, them tuned itself to the static channel and nothing will unstick it. The


Hello,The problem should be from the front panel control board. The board is defective or has disconnected from the inside. To\015\012 actually find out what's wrong, you need to disassemble the TV. But \015\012before th ... Sony BRAVIA KDL-52W4100 52 in. LCD HDTV

The picture will come on when you first turn it on but after 15 minutes or so it fades away. The sound still comes out but no picture. Sometimes it will come back on on its own after a while and then go out again. If you turn it back off for 15 minutes or so it usually comes back on. We already bought a new tv and that one works fine so its not the cable box but I would like to put the old tv in my room.


... Sharp 32L-S400 32" TV

I have lost some of my channels on freeview. the area where i live is not due to switch over yet. all was working fine until i tuned in yesterday with no signal. i have reset my channels but lost quite a few - itv, channel 4, channel 5 etc


You need to check your aerial,sounds like signal loss. ... Flat Panel Televisions

Channel 9 on TCL tv has no picture.. have tried to re install but all other channels are fine except this one.... channel 9 is working on atv but not DTV please help me??


Is channel 9 offered in DTV? ... Flat Panel Televisions

Tv upstairs was working perfect then lost all its programmes now it will not tune in comes up no signal yet tv from downstairs works in its place. downstairs tv works fine. we get a good reception where we live.


Your cable connection should be break from downstair to upstair way. ... LG Flat Panel Televisions

I accidently moved the tv remote and lost one of my favorite tv channels, all the other channels come in fine, but I am unable to get this channel no matter what I do. I beleive this is only a minor problem, but it is still a problem for me. Please can you resolve this situation for me. My email address is: lostgringo2003@yahoo.com


... Coby TFTV1925 19 in. LCD TV

I've a nordmende tv hd ready, all channels working fine but no sound coming through on sky channel. Any ideas.


... Flat Panel Televisions

PLASMA Model # TH - P50VT20A The red PWR light is flashing, It will not respond to the remote, the remote has NEW batteries and works BUT the TV power on swith on the side of the TV is in the ON position, if I turn the TV power switch off/ON the TV starts but only goes for about one minute!! I tried to reset the auto tuning, it starts tuning then when the first channell is selected, THE TV TURNS ITSELF OFF., with the RED power light flashing 11 times, pauses then repeats the flashing sequence a


... Panasonic Viera TH-50PZ800U Plasma TV

Philips PFL5522 37 inch flat screen. I have been using it through a Sky box for two years. It is now the spare TV and is plugged straight into the Ariel, I installed all 115 Digital channels and works fine but when I switch it off and back on again it has lost all the channels an I hav to re tune again ??


... Flat Panel Televisions

Having an issue with the sound on an LG TV 47LH55. All of a sudden one day i turned on my Xbox and there was no sound. Sound works perfectly from directv box in all HDMI slots. However no sound coming from Xbox in all HDMI slots but video works fine. I have sound and video when Xbox is plugged into a different tv so nothing is wrong with the Xbox. Any help is appreciated


... Flat Panel Televisions

My NEC NLT-26HL1 works fine through my SET-TOP Box however I can't change channels with my remote or AUTO TUNE with my remote. The remote is a genuine NEC 26HL1. It seems the set has an Hotel Lock and I can't seem to unlock it. When I go to MENU I get all the other applications except the AUTO TUNE. Can anybody help?


... NEC Flat Panel Televisions

LG tv picture was grainy, blurry, and the picture would come in and out. The sound still works just fine. I took the back panel off to check it out and i seen that 8 capacitors were bad on one of the


Thats just normal take the tv to a tv shop and have those capacitors replaced and you should be fine ... LG Flat Panel Televisions

I have a Sanyo DP50747 (May 2007) it has worked perfectly fine for 4 yrs and then one day while on it shut off and will not power back on. No light - no nothing - as if it is unplugged. Any ideas? I am afraid to call the repair guy because we really can't afford to have them come out and with my back being bad there is no way I can lift this to get it into the vehicle to bring it somewhere.


Tries tv unplug,replug it back like about an hour later.The tv should resetting itself back to the factory setting.Now,the tv should be working again.If tv have the same result,the tv power supply board is the causes and the problems.That the board,w ... Sanyo DP50747 50 in. Plasma TV

I have a digitrex flatscreen tv model ctf2671 with inbuilt freeview. The first retune necessary for the digital switchover went fine earlier this month. Now a second retune is needed but the tuning functions stopped working. it initially starts scanning but after about 1/10 is done nothing happens, the progress bar doesn't move any further. It means I have lost many channels. HELP !!!


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1274 seconds