It might be due to some loose solder terminals at its main power regulator section. I do not advice you to do it by yourself, because, the main power regulator section to all TVs are dangerous for an unskilled person to handle. Contact any experienced service technician.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have a techwood 42832 hd digital tv and it will only stay on for an hour at a time then goes onto standby (the timer is not on) is there anything i can do to fix this problem?
It might be due to some loose solder terminals at its main power regulator section. I do not advice you to do it by yourself, because, the main power regulator section to all TVs are dangerous for an unskilled person to handle. Contact any experien ...
Standard (CRT) Televisions
Samsung, standby, lamp, timer. TV turns on with sound and picture. After about a minutes the picture goes away and then the sound. Then the standby, then the TV will shut down. but the standby, lamp and timer lights stay on. What is the problem?
Samsung LTP326WX/XAA 32 in. HD-Ready LCD Television
Hi, my Panasonic Viera TH-42pv30 goes into standby by blinking with a 4 quick blinks and then a long solid blink.
Ive been investigating this issue on the internet and have come across the blink error code 4 blinks Power SOS P Board.
Ive disconnected all other devices connected to the plasma TV and changed power outlets however the problem is getting worse. The TV wont stay on for more than a minute now.
Do you know what the problem can be and an approximate cost to fix it?
The TV is no long
Panasonic TH-50PV30 50 in. Plasma Television
Problem on Tv with universal board.
A television with universal board go standby within 20minutes and if i use remote or program button to power it again it goes again stndby within 2minutes. What is the problem. Can i fix it?
Standard (CRT) Televisions
I have a Emerson 32" LC 320 EM1F, When I press power button, green light flashes 12 times then red light comes on and goes to standby. What seems to be the problem? How can I fix it?
It sounds that the main digital board has damaged. 12 blinks indicates it. if you wish to know more check this link for more details about 12 blinks to Emerson ...
Emerson Lc320em1f TV
I still have the problem on my 57in. Sony projection TV I clean the shields or lens on top of the three colored lamps when I removed the back cover the picture improved for a couple of days but it went back to all green and green arched horizontal lines I have sound but it goes black and the standby light blinks 5 times can this be fixed? Do any lamps have to be changed? If so how are they changed and where can they be purchased/
What is the Model Number listed on back of TV?? ...
Sony Projection Televisions
Hi i have a samsung HL-S5679W tv and unit will not turn on. I have three things flashing on the power button they are LED , Timer and Standby Temp. Any clues as to what my problem is and what i can do to fix myself. Thanks for your time. Bart
Hello Bart\015\012Your Samsung DLP TV has a major fault. Three blinks of LED denotes that there is some fault in it video section. Power supply section is OK, and is working well, but after switch on, the main system miocrocomputer IC inside ...
Samsung HL-S5679W 56" HDTV
Mitsubushi WD-52525. Replaced caps a while back. ALL of them. TV was fixed. No problem. NOW after a lightning storm over night, my timer light is blinking 11 times-pause-11 times... I can't find anything on that issue. Any ideas? I do all of my own repairs, I just can't seem to figure this one out.
Hi, Please check your RF( antenna circuit) for malfunction. The first part attacked by lightning is RF. But it can spread to other parts.\015\012\015\012Regards ...
Mitsubishi WD-52525 52" Rear Projection HDTV
I have a Panasonic CRT TV TX29-P150X bought in Dubai. When the TV is cool it turns on for about 30 seconds and goes on standby by itself again with the red light on. Now it is on permanent standby until the TV cools off then it turns on again and then again goes off after 30 seconds. What could be the problem? My technician has replaced all the CAPS, one resistor and the regulators but still no go. What could be the problem?
Flat Panel Televisions
I no longer have any Red color. Only yellow and blue. I've fixed a problem with a fuse on the deflection board. That fuse kept blowing so I re-soldered the FBT and it worked for several months. Now my red doesn't work. This just began last week and I didn't see any evidence of anything blowing. What are the potential problems, how can I narrow down what is the precise problem, and how do I fix them?
The most likliest cause would be a issue with the RED CRT drive board around 35.00 from www.tvrepairworld.com it could also be an issue with the RED CRT itself but thats doub ...
RCA HD52W66 Projection Television
The tv goes into standby (picture goes black) the standby light flashes many times then the picture comes back on . it will do this repeatidly . some days it works fine . not today though ! UGH! lol . Help please ! Im please tell me how to fix it myself,im' mechanically inclined , and poor. thank you .
Sony KDFE50A10 50" HDTV
I have a Mitsubishi WS55809 that I purchased in 2002, and my kids have been using it for gaming. As they are playing, the screen convergence will change constantly from a normal image, to a "bow tie" image...if I tap the side of the TV, sometimes the screen goes back to normal or from normal to that "bow tie" image.
I've heard you can buy "convergence IC's" to fix the problem? could it be a mirror alignment problem?
How do I fix this?
Unless you've moved the unit lately, or the kids have treated it roughly, it's probably not the mirror, which is fixed in place with screws on this model.\015\012\015\012You can also take a look at this website ...
Mitsubishi WS-55809 55" Rear Projection Television
I posted a problem on how to remove panel but I solved it. Now as I mentioned the tv comes on goes green then black no picture just sound. I followed instructions on adjusting G screw but it doesnt work still have same problem I notice that when it goes black all tubes are off. please HELP can this be fixed I will be awaitng for an answer. Thankyou
I have just got sky + hd, the problems is since connecting it to my philips hd tv every so often the picture goes black, the sound is still there, the picture goes off for between 1 & 5 seconds, it can happen every 2 minutes or not happen for a couple of hours, i have had a new hdmi cable and a new skybox and neither has fixed the problem. it is the tv?
Philips 32PFL5403D/27 32 in. LCD TV
Q: Red standby light was flashing red for a few days. Now we can't get any power at all. lg model 32lc2du-u3
A: Power supply problem.... I can explain to you how to fix via email with detailed instruction and pics... Hope you haven't bought another as this is a 5-30 dollar fix. I have 2 50" that did this I fixed mine for 80 cents.
HOW DO I FIX MY POWER SUPPLY?? THANK YOU>
First: service manuals http://elektrotanya.com/?q=showresult&megnev=lg&megnev2=32lc2du-u3%20 ...
LG Flat Panel Televisions
Surge problem? I have a Samsung LN40C530 LCD TV and when I plug in and turn on anything that pulls alot of power ( Vaccum,Iron, Perkulator coffee pot)into a wall plug on the same circurt my tv goes blank and soundless for a minute and then back on. It has always been plugged into surge protectors and I have tried a new one, same problem. Also plugged a different TV into the same plug and no problems. I have had this TV for about 3 years now and this just started happening. Thanks for your help i
Try plugging vaccum or what ever you are using into a different plug that is not on the same circuit and see if it still does it. I had a heater and microwave plug into same circuit and it would blow the circuit. I had to find another circuit. Rememb ...
Samsung LN40C530 TV
Hi I have a Philips 42PF5521 and recently when switching on clicks to come on and after say 3 seconds goes straight back off again , on disconnecting the power cord the flashing green light goes off then when I connect the power it goes onto standby and comes on or it did it gradually took more attempts to get it on and now clicks but won't come on at all!! Is this fixable?? New power board or am I wasting my time? I, ll have a go if I think it's fixable!
Ad capps on power supply use hair drier on panel or aim it in bk of telly bet it comes on ...
Flat Panel Televisions
My daewoo model dsj-4710 turns on but goes right to standby need help finding out whats the problem
Main power supply which has the standby supply with it--look for those pesky puffed up filter caps. ...
Sony kdl-32s5100 green light (power) comes on then goes to standby and flashes slow, can I fix this
THE 2 BLINKS IS AN ERROR CODE.You could Google the model number to see what it means but it likely is short protect or similar: Some general information:I see so many here with no sound/nopicture issues:ISSUES: 1. IF ...
Sony BRAVIA KDL-32S5100 32 in. LCD HDTV
I have an LG LCD tv. Model number 42LC2D-AA. The screen is purple and we can't do anything with it. Turning it on, just goes black or purple, and the when try to turn it off it takes a few goes before it registers to actually turn off (via standby on the remote)? Any help or advice would be appreciated. Thank you kindly
Most likely not a do it yourself repair===I would give some advise---if set is opened look for puffed up caps on power board... ...
LG Flat Panel Televisions
Water damage soda dripped onto the controll panle on the right side of the unit. screen works fine but at odd intervels a set up menue apears. the volume controll buttons will on and off switch between setup menue and actually controlling the volume, other buttons have similar problems, if i replace the controll panle will this fix the problem
Emerson LD195EM8 19 in. LCD TV
I have philips ctv 21pt138a/94r and when working the tv, sudenly goes to standby mode ,then red LED blinks. after 15minuts tv goes to ON what was the problem? please.....
Look at power supply board as this is a hard to turn on issue:look for caps that are puffed up and look like these. ...
Flat Panel Televisions
What's your problem?I have Samsung CS-29Z57MQ (29in CRT Slim TV) and due to curverd corners I tried to set using service menu (info - menu - mute - power). While setting I accidently pressed INFO button again and it auto changed some G2-Adjustment values. I switched off the TV. From after that TV is not turning on, its on standby mode and when I press power button or service menu button I only can hear the click but again no picture comes and it goes to standby again.
Samsung Standard (CRT) Televisions
Tv is not working. when we press standby button to switch on, after a few seconds it goes into standby mode blinking the red light 6 times between each interval. what can be the problem?
Six blinks indicates the fault with serial clock. It might be doue to a track break or with any shorted capacitors or so, in the serial clock-serial data path. The troubleshooting to this fault is very very skilled work. It will be best for you to ...
Sony KLV32S550A 32 LCD TV