Tried to reset the tv.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
No picture Picture instantly gone when accidentally pressing two or more remote buttons simultaneously. Screen does display remote commands but there is no indication of a broadcast signal. TV is hooked up to cable. Cable service is normal on another set.
Tried to reset the tv. ...
Standard (CRT) Televisions
My Sharp Aquos LC-60LE847U lcd TV has some kind of controller issues. At times when we turn the set on using the remote, the indicator light will light but the TV never has sound or picture. It never "turns on". Then when you try to turn the power off, neither the remote nor the manual switch on the set does anything. If you fiddle with the power enough, the indicator light on the bottom bezel of the set will start flashing 3 blinks then one blink and keep repeating that. Unplugging the set
Sharp Aquos Flat Panel Televisions
I need a replacement for the lost remote control for model #VIZIO E320V
100-240V, 1.5A 50160 Hz
A universal remote I bought from Wal-Mart did not work for the TV functions, such as navigating from one icon to another (Input, picture, screen width, etc.) The remote that came with the set worked perfectly, and would like to have another one like it that was made for this particular TV.
I really like my new TV set.
Here's the LINK. ...
Vizio L32 32 in. LCD HDTV
Wd65513 mitsubishi tv 65513 i have this tv the picture is good and clear but after 15 to 20 minute of operating the picture would goes off I adjust the volume control I can see the volume control indicator moving up or down I can see other function indicating the set is not dead but no picture.If I turn the set off and then on the video will show normal for the next 20 minute then gfoes off again I need your help with this problem
Mitsubishi WD-62525 62" Rear Projection HDTV
I had sound but no picture on my Element Electronic FLX 3211B LCD Television Set. I replaced two capacitors, and now I have lit screen by turning on the tv on the side panel. Remote does not control the tv and no indicator light are on. But the tv screen is lit. the indicator light and the remote controlling the set may be the same problem. Does anyone know how to fix this ?
You might have bad capacitors still that you cannot see. The only way to be sure is with an ESR meter. Check all the connections on the boards again to be sure that the sensor for the remote did not come off. ...
Element Electronics FLX-3211B 32 in. LCD HDTV
I recently bought a Sansui (SLED2453W Series A) HDTV. I have my pc hooked up to it, and I get a picture, but the highest resolution the picture gets on the TV while hooked up is 1366x768 (while the TV is normally 1920x1080), the same resolution as my PC monitor. When adjusting the resolution via the control panel on my PC, I'm able to set the TV resolution to as high as 1600x1200, but when I try to set it it gives me a " not supported" error message. Is there anyway to up the resolution on my TV
Flat Panel Televisions
I have a Westinghouse LTV-32w6HD that has no picture but faint multicolor vertical lines that change according to the input (the lines change as the picture would normally change). I'm on HDMI input but have tried other INPUTs as well with no differences between them. Sound is OK. Remote works. Set powers up normally- just no picture. Where do I start? A schematic with voltages would be nice!
Two possible causes for that problem..1- T-Con board that drives lcd panel (screen) is bad and need to be replaced.2- LCD Panel (screen) itself is bad and replacement may cost you more than tv worth.Schematics in service manua ...
Flat Panel Televisions
so, this is the situation:
I have lost my TV manual and I want to set the TV picture format to 16:9 for permanent, or even better, set it to "automatic".
I have the Sony RM-833 remote control for the Sony KV-X2101D Trinitron television.
So far, I have managed to change the picture format to 16:9, but it changes back to "Normal" (4:3 format I suppose) every time I switch channel.
So, how can I memorize this16:9 format as permanent? Or even make the picture format change automaticall
Your TV's native format is 4:3 so to prevent burn in effect the TV will go back to 4:3 every time you turn it off or change channels. ...
Flat Panel Televisions
Hi there,, i have a fine 27in akai tv, i have owned it for some 4 years now, model number is LCT 2701AD, with the factory remote MODEL KC02-A2...but somehow i inadvertantly with the afore- mentioned remote, set the tv picture up so it rolls on the left and right sides, and it distorts/stretches figures on both sides as things get close to each side, i never got an operation manual with this tv..so i dont know how to bring the picture back to the normal way it was before i got stupid..thanks for
Akai LCT2701AD Television
Dont have the remote and want to hook up to satellite dish, TV picture is great but dont know what to do? can I get another remote?
Sony KV-27S65 27" TV
Westinghouse LD-4680 Turn TV on this morning, heard the normal click sound of it turning on, saw red LED glow coming through bottom grill - like normal....then about 5 seconds later, heard another click, and red LED glow turned off(TV turned off). That was using remote.
Tried turning it on with power button on TV itself, heard the click when it turns on, and just as fast, heard click indicating it turning off.
Now, it does absolutely nothing - acts as if it is not receiving electricity.
Westinghouse 46" Class LED 1080p 120Hz HDTV,2.14" ultra-slim LD-4680
I have an older model emerson TV set up on cable it was working but I moved it into another room, now I cannot get a picture , need to reprogram older emerson remote has no source button
Go to www. remotecodelist.com and download the code instr. manual go to www. retrevo.com or ...
Standard (CRT) Televisions
Can you help me with a new 32 inch Philips flat screen TV that I cannot get my DVD to indicate a picture, yet I do get audio. The model is 32PFL3505D/F7.
I have downloaded the latest software release version, ZPBF2QA_078_0_3202, and still same results.
The DVD player is an LG Brand, model DV172K. I have tested that on another flat screen TV and it works fine, yet with the Philips TV I just get audio and no video, and have tried several ways to hook up the wires. Still all same results.
Philips Flat Panel Televisions
OI HAVE A ZENITH H27H49S TV REPAIR MAN SAYS IT'S A SAMSUNG. TV HAS A POWER PROBLEM THE TV COMES ON NO PICTURE THUMBING SOUND. THE REPAIR GUY SAYS I NEED A YOKE SWIE2-0134 UNABLE TO FIND ONE. THE PREVIOUS REPAIR GUY SAYS HE HAS THE SAME PROBLEM WITH ANOTHER SET AND HAS BEEN LOOKING 8 WEEKS FOR THE PART ANY HELP YOU CAN GIVE ME WOULD BE GREATLY APPRECIATED THE TV HAS A HOOK-UP FOR A COMPUTER AND HAS ON-AIR WHICH ELIMINATES THE GENERIC PRODUCT THANKS
The yoke coil is very critical component of tv. it matches with the picture tube & the circuit. one can not replace with another kind of yoke. these yoke coils are very rare to get. i m so sad to say if it is not available you have to replace the ...
Zenith Standard (CRT) Televisions
My LC-37SH20U was working fine. Then, when I gor home from work and turned it on, I heard the usual volume and the "click" from inside, then the picture comes on. After only 4-6 seconds, the screen went black but the volume stayed for about 3 seconds. Then I hear a click again, and evrything goes off, but the power indicator keeps flashing green.
When I hit the power button both on the set or on the remote, nothing happens.
model are sharp LC-37SH20U
This is a fault solution which can be checked and corrected by you assuming that there is no component failure. There is a high possibility that the components over a period of heating and cooling, tend to bring on a problem of dry soldering ...
Sharp LC37SB24U 37 in. LCD TV
Just got a fairly new Sylvania lc32ossx from a friend, however, the remote was misplaced during a move and the owners manual is also. With the buttons on the tv I can pretty much do all the set ups except changing screen size of picture. The picture only sits in the center of the tv. I want it to be on widescreen or to take take up entire tv screen but cannot find settings for this manually. Can this be done only with the remote?
Sylvania LC320SSX 32 in. LCD TV
Lost picture Lately,after about an hr1/2 the picture suddenly disappears. I still have sound but the screen goes black.. no warning, just picture gone. new batteries in the remote. I shut the system down (set top box&tv) then turn it back on and so far the picture's been coming back. I've had the set since '05.I'd appreciate your input. Thanks.
Try unplugging everything and then plugging it back in. When my xbox had the "ring of fire" my brother asked me to fix it and I just unplugged and re plugged it worked and came back to life. (be careful that you either have the instuction menu for se ...
Protron PLTV3250 32 in. LCD Television
Videocon tv how can we increase our sound by normal remote?
our sound should be start on vol 49. how can we set as normal sound on vol 22 with normal remote? please tell me
Flat Panel Televisions
SONY LCD TV KLV-32S400. PATCHY PICTURE SEEN.
BACKGROUND LIGHT IS SEEN MORE THAN NORMAL.
AFTER SETTING THE BRIGHTNESS MAXIMUM, PICTURE IS OK (90%). BUT NOT NORMAL.
Sony KLV32S400 LCD TV
The screen is not showing the entire picture. Part of the picture is "off screen" (beyond the edges of the TV). No matter what ratio I set on the TV or what resolution I set on the input (in this case, an XBox), it doesn't change. The same holds true for regular broadcast TV. If I'm watching something with a "ticker" at the bottom, it is partially beyond the edge of the TV.
Zenith Z42PX2D Television
The picture on my Sanyo dp424829 is stuck on zoom and I don't have a remote for it. How do I get the picture back to normal without the remote?
Flat Panel Televisions
My sony KP-51WS500 needs reset. I hit a button on the remote and my picture went off. I started pushing buttons like an idiot trying to get the stations back and in the process it messed my picture up. I have tried everything. I can't get it ti set back to factory settings. Can someone please help?
It is possible that you messed up the convergance of the projector lamps on this TV. Try the convergance setup to see if this helps. ...
Sony KP-51WS500 51" Rear Projection Television
Trying to hook up to a new Dish network box that was sent as a replacement. Before I can go through the Dish set-up the TV picture blinks on and off constantly. I have replaced the HDMI cable, confirmed that the input setting is correct and cable are hooked correctly. Is there a resolution compatability issue?
I would try using a gold plated HDMI cable. Often the problem is that the cable is not capable of sending enough frames per second. I replaced mine with a slightly better quality cable I picked up at Sears for $25.00 and the issue was not only resolv ...
LG 42LE5400 42 in. LCD TV
Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,
Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ...
Vizio VT470M 47 in. TV
DVD PLAYER 838C - PRESSED SETUP, AND TRIED TO CHANGE PICTURE SETTINGS AS THERE VWAS A FAULT OF NO COLOUR. NOW THERE IS SOUND BUT CANNOT ACCESS A PICTURE AND CAN'T SEE WHAT WE ARE DOING.
IS THERE A DEFAULT BUTTON WE CAN ENTER TO RESET ALL SETTINGS ON THE REMOTE? - VERY URGENT PLEASE
Hisense Flat Panel Televisions