Having problems with your Standard (CRT) Televisions ?

I have a 22 inch AOC Envision LCD TV. When I first turn it on, only the top half of the screen displays picture while the bottom half is a gray/black color. If I wait about ten minutes or if I tap on the back of the TV, the picture is completely restored and I can watch everything just fine. However, it is pretty annoying to wait for the picture to come back. Since the picture does come back after a while and looks fine, I don't think I have a broken backlight or anything like that. Also, becaus



Answers :

There is some loose solder terminals at the vertical scan output section at printed circuit board. If you are handy in electronic circuit boards, loacate the vertical output section, resolder all the suspected solder terminals there. This must surely rectify the problem to your TV.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a 22 inch AOC Envision LCD TV. When I first turn it on, only the top half of the screen displays picture while the bottom half is a gray/black color. If I wait about ten minutes or if I tap on the back of the TV, the picture is completely restored and I can watch everything just fine. However, it is pretty annoying to wait for the picture to come back. Since the picture does come back after a while and looks fine, I don't think I have a broken backlight or anything like that. Also, becaus


There is some loose solder terminals at the vertical scan output section at printed circuit board. If you are handy in electronic circuit boards, loacate the vertical output section, resolder all the suspected solder terminals there. This must sure ... Standard (CRT) Televisions

Sony tv kdl-46vl130, Turn the tv on, half of the picture is dark, leave the tv on for about 20 minutes, and the tv is perfect, and stays perfect no matter how long is watched, Turn the tv off, and come back and turn it on the picture is again dark, wait 20 minutes and the tv picture is perfect. please advise carl b. wright


... Sony Projection Televisions

The picture will come on when you first turn it on but after 15 minutes or so it fades away. The sound still comes out but no picture. Sometimes it will come back on on its own after a while and then go out again. If you turn it back off for 15 minutes or so it usually comes back on. We already bought a new tv and that one works fine so its not the cable box but I would like to put the old tv in my room.


... Sharp 32L-S400 32" TV

I have a Sony KV-35S26 manufactured Aug '97. The picture comes ON only occasionally. When it fails to come ON, the standby light blinks continuously. Sometimes, the picture comes ON initially then goes out after several minutes. The picture looks fine when its working. Audio works fine. I removed the back cover and inspected the soldering, wires and connectors but found nothing obvious wrong. Just before the picture goes out, the image being displayed collapses vertically then I see a ser


After 4 or 5 yrs EHT ( transformer that supplies voltage to CRT TUBE - TV TUBE ) becomes weak - then few TVs ( not all TVs ) behaves exactly as you have described.............. .......so solution is EHT ( also called as ... Sony KV-35S26 35" TV

JVC AV-36D502. Our TV has been on the fritz. Sometimes when we try to turn it on the power light just blinks. We have figured out if we wait a minute we can unplug the TV plug it back in and then the TV will function normally. Although it does take the picture a little longer to come up. Still looks fine though. Any ideas what may be causing this?


U have tools like a soldering iron,a roll of solders and know basic soldering work?Yes.Resolders the FBT-(the flyback transformer) the big black block of plastic with a red wire with a cap hook to the CRT-(tv tube).On the side wall of the FBT.Have a ... Standard (CRT) Televisions

I have a Sharp AQUOS LC-26DV22U 26 in. LCD TV with a built in DVD. When I turn the TV on it will come on as it usually does (the please wait appears in the lower left corner and moments later in the right hand corner the channel box appears and then the picture comes on) and after about 30 - 45 seconds the screen goes blank, the audio stays on and I can change the channels with no picture. When I turn the TV off and wait a couple seconds and turn it back on the "please wait" that appears in the


... Sharp AQUOS LC-26DV22U 26" LCD TV

Philips Plasma Tv model #50PFP5322D/37 has been losing the picture for a second and then coming right back on for a couple of months. Sound is fine. Last night lost picture and will not come back on. Blue light still on though.


That is an issue with many plasma/LCD TV's - because TV's are made so slim this days, the source cannot handle extra voltage if sometimes is pushed through the cable from your TV operator. Than some of the condensers from the mother board can g ... Flat Panel Televisions

My rca r52wm24 Tv turns on but after about 20 minutes the screen goes black but I still have sound. Sometimes the picture will come back up and work fine after 10-30 minutes but it will go to black screen again. Then sometimes the picture will be fine for around 20 min utes agin flash to black then flash right back to normal. rnWhennthe screen does go to black it slowley fades out takes about 10 seconds to go black


Hi mcpheeters16,\015\012\015\012First to isolate the loose connection from fault, check the cable connectors from the lamp and the ballast board. Pull-out the cables and then re-insert. Also check the ballast board from bad solder joints (crack ... RCA R52WM24 52" HDTV Projection Television

I have a TOSHIBA MODEL 36-A-40 YR 2000 (Tube Type) which works fine 98% of the time. It is connected to a Comcast cable box. It will occasionally go off for no apparent reason and then come back on in about 3-5 minutes. When it returns, it sometimes comes back on perfectly. Most other times it comes back on slowly with a large red strip across the tube and this will slowly but eventually blossom into a good video picture and the audio will return. If you hit the side of the console, tha


Bad solder connections do eventually happen for most sets from heat and expansion on the board--you have really solved this issue--you have a physical issue in the set and now you have to find where.If the picture were to dim out slowly and c ... Toshiba Standard (CRT) Televisions

Hi, I purchased a Sony Bravia model #KDL-52S4100 two years ago. About 7 months ago when the TV was turned on there was no picture for 15 minutes or so, then when you turn it off and on again half a picture will show with larger images on the right hand side of the screen. Other times there is half a picture and then when you turn it off it will come on with a full screen picture. Once it warms up the picture is fine. Is there any inexpensive solutions here? Thanks for any help you can provide.


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Flat Panel Televisions

Lost picture Lately,after about an hr1/2 the picture suddenly disappears. I still have sound but the screen goes black.. no warning, just picture gone. new batteries in the remote. I shut the system down (set top box&tv) then turn it back on and so far the picture's been coming back. I've had the set since '05.I'd appreciate your input. Thanks.


Try unplugging everything and then plugging it back in. When my xbox had the "ring of fire" my brother asked me to fix it and I just unplugged and re plugged it worked and came back to life. (be careful that you either have the instuction menu for se ... Protron PLTV3250 32 in. LCD Television

Hello, I have a Sony KDS-55A2000 and it works fine for a couple of minutes and then it switches off and the green led starts blinking for about a minute and then the picture comes back and works fine


First thought would be the lamp may be about to fail if it has not been replaced in a long time---a warning will be the picture is a bit darker than before and takes longer to get bright than it once did. ... Sony KDS55A2000 55" HDTV

Bush tv, screen has gone blank with no sound or picture. Fuzzy noise in the back ground. Sometimes takes up half hour to come on but today no noise / no picture just blank screen, any advise on the is


I think it is Time for a NEW TV. Not worth the money to repair. If it is under warranty, have the work done but other than that, you are wasting your money ... Standard (CRT) Televisions

Have Philips 60PL9200D/37, having red light temp problem, fixed fans, fans are working just fine but sometimes after the tv has been on, red temp light comes back on and screen goes black, turn it on and picture comes back


... Philips 60PL9200D Projection Televisions

The picture is fine but the power will cycle on and off every couple of seconds the after a while it will come back on and be ok....or it will stay off for a period of time then come back on out of the blue


Do you mean only the screen goes off and sound remains or does the tv go off altogether? Also what is the status of the LED at the front when it goes off? ... Hitachi 51S500 51" Rear Projection HDTV-Ready Television

I have a 9 yr old D52W20 RCA tv. It turns on and is fine for about 35 minutes. Then it turns off and then right back on again. it takes about 15 seconds from the time it turns off for the picture to reappear. It will stay on anywhere from 5 to 30 seconds before turning off and back on again. I had a repairman come in and he said it was not the capacitors but said he needed more information. At that time the unit would be fine for a couple of hours before it would start acting up. Any thoughts


Try resoldering the flyback transofrmer the pins tend to develope solder cracks and can cause that symptom. ... RCA D52W20 52" Rear Projection HDTV-Ready Television

The TV turns on and shows a picture that you can watch and within 10 minutes the TV loses its picture, however, the light is still green. If you turn the TV off you can get the picture to come back after you wait like 20 minutes or so but the TV will lose the picture again in 10 minutes or so. Any suggestions?


... Hitachi 42HDT52 42 in. Plasma HDTV

I have a Samsung DLP TV (model HLT5076S). When you turn it on there is no picture for several minutes (5-10 minutes) and then there is no sound once the picture comes on. You need to turn the TV back off & then restart it to get both picture and sound. Sometimes you need to do this several times before the TV turns on, you hear a click, and then you get picture & sound. It seems like it is waiting for something to warm up? The problem is not the bulb (fairly new) or with the electrical outl


This is because the CRT that is the cathode tube ray oscillator is taking time to warm up ... Samsung HL-T5076S 50 in. TV

My tv is a HDLCD3200A. The tv would work fine and out of the blue sky, the picture would start with virtical lines and go black and loss of audio. Now it wont come back to life. What do you think a po


... Sansui HDLCD-3212 32 in. LCD TV

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


No picture on a DLP when you can see the lamp is working is ALWAYS the DLP chip. BECAUSE you recently replaced the color wheel, i suspect that the LVDS/data cable to the light engine was not plugged in well and has come loose. I suggest checking and ... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

I watched it last Sunday picture was fine. Monday turn on the TV no picture or sound. My friend came over and got the sound to come back but no picture, just a black screen.


You need to start with the power supply board. ... Flat Panel Televisions

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

Hi. We have an old analog TV (Sony) which has a new digibox running through it (since the switch over). Was fine, but over the last few weeks, intermittently, the screen goes black with EXT 1 in the top corner, but perfect sound. Change channel, no picture, perfect sound. If we fiddle with the aerial cable, the picture jumps back. This happens sometimes after 30 mins of perfect picture, and sometimes after 3 hours.. sometimes not at all!Have replaced cable, no joy - same problem - and to be fair


Your picture tube is on the (Verge) Of going. ... Flat Panel Televisions

LG tv picture was grainy, blurry, and the picture would come in and out. The sound still works just fine. I took the back panel off to check it out and i seen that 8 capacitors were bad on one of the


Thats just normal take the tv to a tv shop and have those capacitors replaced and you should be fine ... LG Flat Panel Televisions

My hitachi 42pd8700 u, when turned on comes up with a no signal sign , i have to turn it off by the remote, wait a few seconds then turn it back on to get a picture . The picture sometimes is blured a


... Hitachi 42PD8700 42 in. Plasma Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1747 seconds