Having problems with your Standard (CRT) Televisions ?

Dual DRF2810 wont switch on I have a Dual TV, the standby light comes on for a few seconds then goes off and won't switch on. You suggested checking that the 'sleep' mode was not set but h

\015 It says its a dual make but not sure.\015

Answers :

Click here and try to download the user manual to your device. If it is amde by Dual, the manual must be here. Download it and see whether you have done any wrong adjustment to it.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Dual DRF2810 wont switch on I have a Dual TV, the standby light comes on for a few seconds then goes off and won't switch on. You suggested checking that the 'sleep' mode was not set but h

Click here and try to download the user manual to your device. If it is amde by Dual, the manual must be here. Download it and see whether you have done any wrong adjustment to it. ... Standard (CRT) Televisions

UN55D8000 fuzzy I bought a Samsung UN55D8000 about 2 months ago and I am not happy with the picture at all! I am only watching HD chanels and the pictures are not clear enough. I even switched from ATT UVerse to Time Warner, the installer checked all my cables and I bought the most expensive HDMI Monster cable and the picture is still not good, not crisp, fuzzy, edges of people are jagged, etc...I have checked every adjustment possible on the settings...any suggestions?

... Samsung 55 UN55D8000 55 3D LCD TV

My HP LC4276N TV is 27 months old. A few days ago, the sound just ceased working. Of course, I checked the settings to ensure that "mute" was not activated and that the setting for speakers was "on". I then also tried connecting auxiliary speakers, but to no avail. Could this have been caused by a blown fuse? A bad capacitor? Or is there another likely cause? I would love any detail on how to check any of these potential problems, or any suggestions for repair. (I have no experience in t

Hello\015\012You haven't specified anything about its picture condition. Anyway, picture is correct, and only sound has probelm I assumes and answers. If picture is OK and oly sthere is no sound at all, check the speakers first. You can chek ... HP Lc4276n 42 in. LCD Television

I have a cornea 47" tv that wont' switch on only the standby light remains on

... Sony Flat Panel Televisions

I have a Digitor 51cm tv Model G2100 which has had little use over the last two or three years we have had it (at a bach, so only used occasionally). It has started switching itself off at random intervals while watching it. I have checked the timer setting menu to see if anything has accidentally been set but that is showing 0 for all settings. Any ideas please?

See if the manufactur has a bios flash and download it save it on a usb drive plug in in turn on your tv run setup and do updates ... Flat Panel Televisions

I have a Sony Bravia kdl 32w5500 and it periodically switches itself off whilst watching programmes on one particular channel (WIN TV AUSTRALIA). It goes into a kind of sleep mode or something and sometimes also switches off completely. When it first loses picture, and sound, the green light is on and you can change channel and the picture and sound comes back but when you go back to WIN TV it again switches of picture and sound and eventually the whole set, if left on WIN TV. The remote channel

... Sony BRAVIA KDL32V5500 32 in. TV

I have a Dual LE32PVR0801 32 inch TV. I left it on stand-by (as usual)a couple of nights ago and now when i switch it on the egg timer stays on the screen as if the hard disk is warming up and wont switch to the freeview. What can i do? I tried turning it off for a minute putting it in stand by for a minute and then switching it on but it doesnt work!

... Combination Televisions

Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions

Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ... Flat Panel Televisions

My 50 inch Philips Plasma TV is normally connected to a Virgin Media HD Box in order to watch TV programmes. Tonight my TV is showing a box that is called Information, and it has the wording No signal or bad signal condition. Please check antenna connection and position. I have attempted to switch the TV off and unplug it from the mains, however the remote control and when pressing the buttons at the side of the TV nothing is happening. When I first switch the TV set on the power light is flas

Unplug both the set and box from power for a while--either may have caused a glitch---power both back with everything already connected and see if the reboot that will happen helps or not--a lot of times the box causes this by confusing the set it is ... Philips Flat Panel Televisions

The TV doesn't power up anymore - i've checked the cord connection, made sure the power switch is in the "on" position, etc. basically ran through all the possible troubleshooting solutions. the little amber power indicator doesn't even light up anymore so it seems there no power registering into the unit at all (i've checked the outlet too). any suggestions?

... Maxent MX-26X3 Television

My hitachi plasma tv model 42PD5000 wont turn on.the red light by the switch wont turn on either.i have checked fuse on plug which is ok.please advise what may be the problem. Thanks Roberto

Hey,A common problem for these is bad capacitors in the power supply, Remove the back from your TV and look at the power supply on the left hand side.You will see roughly around 9 x capacitors that are bulged / domed shaped on ... Hitachi 42HDS69 42 in. Plasma Television

Zenith L20V34S Completely DEAD Zenith LCD flat screen 20in Model: L20V34S Manufactered: Oct 2005 Listed HealthCare Facility TV Hello all, TV wont turn on (no red light either)after turning it off from the night before. Heres what i've tried: WHEN AS IS -Checked to make sure on/off switch on rear of TV was indeed "on". -Tried using the remote and the actual TV "on" buttons. -Checked of course all my outlets and made sure it had power and had good connections. -Used voltm

Repair of the Zenith L20V34S\012The power supply is responsible for 90% of failures on this model.\012Symptom 1\012TV cannot be turned on. It will act as if it is completly dead.\012Repair\012Replace capacitors C5 and C6, rated at ... Zenith L13V36 LCD TV

I have a Dual lcd tv model number DLCD3221, after turning it off it wont turn back on, seems like theres no power going through, have checked the fuse and its ok

... Sansui Flat Panel Televisions

Stand by light won't come on tv wont play checked switching adaptor

If looked for loose contacts in power outlet, RC Jack, cable and connectors, you have tried using different input devices, the TV might need service. ... Flat Panel Televisions

When switched on, the power light flashes on and off on the front of the TV but no picture. We have the back part of the panel off and there are no puffed capacitors. Everything looks good except some goop around some of the capacitors. Is it normal to have goop that looks like its flowing out of the caps? Is it a glue that helps it seat better? I have access to a multi-meter and have the checked the output of some of the connectors. Anything to suggest?

It is not normal to have goo coming from the cap. Usually a cap will pop and you'll have the top or bottom puff out. Sometimes a cap will explode and you'll have a little more of a mess. So if it looks like goo is coming out if it then that is probab ... Samsung PS42B430 42 in. Plasma TV

I have a Vizio VL320M. Have had long standing problem with TV picture & sound going off for 5 to 10 seconds. Have unplugged TV and held power switch for 30 seconds then plugged it back in. Does not do any good. Lately, I have had a problem with the HDMI input. The picture shrinks top and bottom. I have to go through HDMI inputs back to the original to fix it. Have checked connections. OK. Any suggestions?

... Vizio VL320M 32 in. HDTV LCD TV

Philips 47 pfl5604h /12 wont switch on dosent seem to have any power going to it have check the cables all or

... Flat Panel Televisions

Hello my name is Corey, I own a LG SL80 47in LCD. On thanksgiving I come home and my TV don't have the red standby light on so I checked my surge protected where it's plugged in. I have a PS3 and surround sound that is also pluged in the surge protector, the other two electronics have the red standby light on, so I switched the plugs around , unplug from the back of the tv, and tried the wall and still no red standby light on my TV!!! any suggestions?

... Flat Panel Televisions

Sony KLV-L32M1 was working fine last night. Turned it off as normal by the front power switch, but went to turn it on this morning & nothing came on, no lights, nothing. Have checked the fuse which is fine, have unplugged it & left it & that's not helped, any suggestions??

... Sony KLV-32M1 32 in. HD-Ready LCD Television

Hi there I have recently bought a Panasonic Viera 32", I have installed the Sky Box and Bush VCR/DVD Recorder Combi correctly but when I turn onto AV2 and switch on the DVD player the screen comes on but is bright green! I have tried all suitable tuning methods and have been through the installtions time and again and checked all cabling but it will not change, it can't be the Bush Combi as it worked perfectly with my previous Samsung set, this is really frustrating, I can't see that it is a fau

... Panasonic TH-37PX50U 37 in. HD-Ready Plasma Television

It wont switch on i have checked the fuse and opened tv up to see if ther was power goin in to it but nothing the lead is ok but whats wrong possible answers?

Make and model of the TV?\012Mian AC fuse in the power supply module is OK?\012LCD flat panel? Plasma? DLP?\012\012Basic LCD monitor and TV troubleshooting guide:\012 ... Flat Panel Televisions

Hi i have a 19 in viewpia tv and my son put child lock on and now i carnt turn tv on i only have a universal remote for it left it unplugged all night and still wont switch on would you have any suggestions please.

... Flat Panel Televisions

I have a tv of philips model no 20gx8350/94r230v , i am facing a problem that video is there but no sound???? i have checked every settings but not working,,, if we are continously switching it on for two hours we will get sound???

... Standard (CRT) Televisions


Did you find a solution? I'm having the same problem ;0( x Jill x ... Flat Panel Televisions

Samsung ps50c450b Hi ive had the tv almost 3 years and now it wont show a picture or any sound. The volume seems stuck on 100 and when i turn it down it goes back to 100 by itself? I have switched off at the wall and inserted new batteries in the remote but it just says weak or no signal check the antenna cable connection. It is connected to a virgin tivo box but this has been tested and is fine. Any help much appreciated. Janet

... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0908 seconds