Having problems with your Standard (CRT) Televisions ?

Lxi tv take apart is the CRT discharged model 580 42058290 Dhhs code. GX I want to through out tv but save some componets and I'm not sure if CRT is automatically discharged or do I have to do it manually It's been unplugged for about 6 days now. Please help



Answers :

6 days,it good for it to do anythings now,there are no more high voltages left.
Should be OK if the CRT is really old, and the set has been unplugged for several days. If in doubt, remove entire chassis (I presume you are keeping this) then carefully break the neck of the tube to gradually implode it (making it totally safe to dispose of), dispose of the cabinet/tube, keep chassis for parts. All done.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Lxi tv take apart is the CRT discharged model 580 42058290 Dhhs code. GX I want to through out tv but save some componets and I'm not sure if CRT is automatically discharged or do I have to do it manually It's been unplugged for about 6 days now. Please help


6 days,it good for it to do anythings now,there are no more high voltages left. ... Standard (CRT) Televisions

Jvc lt-42pm30 Exact model is JVC-42PM30/ZBA Once plugged into power source TV has a fast blinking horizontal lines . Disconnected from cable box and blu-ray player. unplugged TV for 24 hours, did not work. Thinking it might be capacitor. Not sure where to buy or what the proper model/mfg I need to purchase. TV is approx. 24 months old, but not used very much. Please help!


... JVC LT-42X579 42 in. LCD TV

Intermittent problem with JVC AV-27020 CRT TV. Power indicator light blinking with no picture or sound. When I unplug it, open the back cover and randomly touch and feel the components inside, plug it back in and turn it on, it works for a few days. Then again same problem. Please help. Thanks.


... JVC AV-27020 TV

I am having 21inch CRT BPL color TV. when i switched it on channel is coming and its automatically tuning and only grain are coming.. (means missing channel) I tried auto tuning,semi autotuning and manual tuning its not working. But Fine tuning is working until i stick to one channel. howerver if i change the channel , same problem occur.. Please help me in this regards


Check and replace its main system memory IC. It is faulty. ... Standard (CRT) Televisions

My battery will not hold a charge for longer than 3 min. I am not sure if my battery is bad or if I am simply not charging it correctly. The charge light only blinks (as the manual says it should when charging) if the tv is on and plugged in. However, the light quits flashing and simply remains on (colored red) after approx. five minutes. The tv then will automatically shut off three minutes after I have unplugged the unit. I would appreciate any/all advice.


... Sharper Image TSILCD7PTSD TV

My sharp aquos lcd tv does not recognize the remote control, already tried the following: changing battery and making sure its in proper position, turning off the tv,unplugging,wait for approx. 10 sec


Try to clean the IR sensor on TV..if not help you can try to replaced IR sensor board assembly..Hope it helps.. ... Flat Panel Televisions

Ok so... I was on my computer one day and... i heard a loud noise im another room. So I went to go check it out an come to find out my sister, knocked my playstation3 down on the ground. Now every time I turn it on, the screen stays black... nothing comes up. It wont even turn off by it self, you nave to unplug it just to turn it off. It rarely works, if you unplug an plug it back in over an over again. If im lucky, i can get it to work then... can some one please help? Please!! Thank you.


It suffered some kind of damage inside--someone who knows how is going to have to take it apart to see if it can be fixed ... Projection Televisions

Tv will not turn on. pressing the "up" button on the remote sets red flashing led 3 times repeatedly. sure this is a code of some sort just not sure how to remedy. please help


... Samsung LN32C540F2D 32 LCD TV

Sound Problem I have no sound from my tv speakers since unplugging the power source for the TV and theatre system (Sony DAV-Is10). It was unplugged for one week and on return I have good picture quality but no sound either through the TV or home theatre system. Oddly if I play a DVD or Netflix program through separate box sound is fine. I have checked audio settings and all cables. I have also tried to "reboot" the TV and select the Theatre settiing on the remote. Help please


I'm unclear about the comment"If I play a DVD or net fix through separate box" What do you mean by separate box? Please reply.Be specific about what inputs on the tv and what settings you have check in menu as far a sound id concerned. ... Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

In my haier lcd L32M3 keyboard functions stat automatically like increasing decreasing volume ,channels change automatically after i have removed the keyboard connector the problems remains please solve my problem thankyou.


... Flat Panel Televisions

Need circuit diagram please for philips/pye crt tv 37kt2060/05. Intermittent crt heater fault


... Philips Standard (CRT) Televisions

I have a Philips projection TV model # 60PP920217F. The TV comes on but there is no picture. I recently changed the coolant in it and spilled a little on the circuit board. ( It was unplugged at the time.) I tried cleaning it off with contact cleaner. I think I may have fried the board because I may have swapped the leads coming from the CRT boards going to the main circuit board. When I plugged it up and turned it on, it smelled like something was burning. I immediately unplugged it once that h


The crt fluid needs to be repalced carefully and correctly...This is why we created step byt step instructions for our kits on our website www.TvRepairKits.com . In msot cases if you cleaned up the spill before powering up the tv would be fine....bu ... Philips 60PP9202 60" Rear Projection HDTV-Ready Television

I have a 2002 Mitsubishi WS 65908, that was damaged last week during a power surge. Smoke was coming from the unit and I unplugged it immediately when a I heard a crackling noise and saw the smoke. Now the unit will not turn on. Please tell me if the unit can be repaired and either way, please tell me what parts may have been damaged. How much would this cost to repair?


From what it sounds it has been hit pretty hard, and it probably is not repairable, you might want to check and see if your home owners insurance will cover the power surge , most of them will, and have wrote off. ... Mitsubishi WS-65807 65" Rear Projection Television

I have an Lg Lcd 42 inch Tv. For the last few weeks when I turn it on it takes forever to come on and most of the time I have to turn it on then unplug it do it about 10 times before it finally stays on without cutting out. Please please help me. Children are not very patient in the morning when waiting for their cartoons to come on.


Hi,\015\012 this could be a problem with the power supply in the tv, it is common and repair kits are available quite cheaply if you have good\015\012 soldering skills.It could also be a bad solder joint on the power supply PCB, but ... LG 42LC2D 42 in. LCD HDTV

Sound I have no sound from my tv speakers since unplugging the power source for the TV and theatre system (Sony DAV-Is10). It was unplugged for one week and on return I have good picture quality but no sound either through the TV or home theatre system. Oddly if I play a DVD or Netflix program through separate box sound is fine. I have checked audio settings and all cables. I have also tried to "reboot" the TV and select the Theatre settiing on the remote. Help please


... Sony Bravia KDL-40V4100 40 in. LCD HDTV

Hello i have an element 37'' tv and i have to unplug the tv several times just for it to turn on. There is a steady red standby light on but when you try to hit the power button it doesnt respond via remote or on the tv panel itself. The only way it will turn on is from a constant plug and unplug of the power cord. Please help?


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Element Flat Panel Televisions

Hi i have an 50 inch LG 50PG20D it can be turned on but it has no picture and no back light . the red light comes on and it changes when pressed power button . It seams that i can use all functions with frame buttons and my remote ( green light flashing). Im not sure if it has sound is on ,you can hear some noise but not sure if its audio or just tv buzzing . Please help!


... Flat Panel Televisions

The green light on the front of my Alba STB102 has started to flash. Nothing I do makes any difference .. I have unplugged it, checked all the cabling, and changed fuses. Unplugging it from the mains turns it off, of course, but then it flashes again after plugging it in again. The remote (new batteries) cannot turn it off or access the menu. Help please?!


... Flat Panel Televisions

When I turn my TV on it will turn off by itself in about a minute and the red power light on the front of the TV will blink. The remote control nor the power button on the front of the TV will turn it back on. I have to unplug the TV for a few seconds and plug it back in to make it come on. It usually takes two or more of these unplug and plug back in sessions to get it to stay on. Some times it takes up to fifteen before it will stay on. Please help.


This is what 's happening: you give the command to start the tv so the power source is initiated and starts to deliver power to the rest of the components of the tv; one of these components has aged and it requires much more current than normal to st ... Toshiba TN55V71 55" Rear Projection Television

I have an lg 32ld350. I plugged in headphones into it as to not annoy anyone with the tv and when i was done i unplugged them and now i have no sound unless i use headphones. Even with them unplugged it tells me that it's still connected when i try and reset the audio in the menu. All audio settings in the menu are grayed out and it won't let me do anything. Please help.


Turn off ur tv.Tries take the head phone steal jack plug it in and unplug it out do this like three or four times.Tries the tv menu audio resetting again.The audio should return.Don't used ur tv head phone again the input jack socket it have problems ... LG 42PX5D 42 in. Plasma HDTV

I just got this TV used and for free and im not sure if i have the original remote but right now the only input that works is the rear input 2, none of the other ones work. In fact i cant even switch to any of the other ones so im not sure if its cause it cant see the other inputs or just that im unable to switch to them. The TV is in great condition and the picture on the Antenna and Input-2 look great so i cant understand why the Input-1, YpbPr and the front input do not work, please help me.


Hi,Click this LINK to view the original remo ... Mitsubishi WS-55809 55" Rear Projection Television

My sharp 20inch cinemaborg crt tv no picture but on display menu and sound are all good i try to resolder all parts or components in crt but problem still exist..please help!


... Standard (CRT) Televisions

When I turn it on it won't let give it commands I use the control and then I do it manually but it won't let me so I have to unplug the T.V ( LE 5400) and when I replug it turns on automatically and t


U need to buy a new tv its not going to work with that crack ... Standard (CRT) Televisions

I have sony kv 2185 model crt tv .no osd in picture .picture and sound ok what is the reason please solve my problem


... Standard (CRT) Televisions

My TV has been unplugged for some time and needs to be reprogrammed. I cannot find in the setup where to scan channels to add automatically. Any suggestions?


... RCA F32715 32" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2776 seconds