Suggested Questions/Answers :
It is recommended you read all this kind of situations
I disabled remote for soyo sytpt3227ab and get it to work? get on menu manually ,get to reset default and cant enter code(which i dont know) with out remote! cant get cable remote or universal remotes to work!?
Soyo SYTPT3227AB 32 in. LCD TV
I recently moved and had my jvc big screen tv hooked up to direct tv through a hdmi cable i get picture but no sound I had this problem before when i had it hooked up the first time the direct tv guy messed with th tv settings and got it to work but i dont know how he did it and now ive moved and am having the sound issue again how can i get the sound to work on hdmi it works on everyother input channel
JVC HD-52Z575 52" Rear Projection HDTV-Ready Television
Big screen zenith pvy6067dt dont have any manual and tv and dvd will only work on pip small pic cant get the full screen to work and dont know how
Try to look up the instructions on the enternet ...
Zenith Projection Televisions
I cant get my tv off of video2. I dont have the original remote. I have the cable plugged in(coax) but I dont get a signal. What can I do?
Without original remote, you can't select its other inputs. ...
Sanyo DS20930 20" TV
Proscan tv i got the tv on a channel i cant get off of and also the remote dont work. i need the tv back on tv and instead its on hdm12 and cant get off it. i have tryed all the bottons on the side of the tv and no luck so now i have nothing
It sounds that the main system control section circuit have the fault. Contact any technician. ...
Proscan Flat Panel Televisions
Cant get off wide screen or ch 3 to go away. Dont have original remote
Sanyo DS27590 TV
No sound!!! some please help me!! my surround sound has been working for years but suddenly a few weeks ago it stopped working and hasnt worked since...does anyone know why?
my xbox is plugged into my tv too...i dont think that has effected it though as it has worked with both pluggedi n before i just cant seem to get it to work now!
LG 55LW6500 55 3D HDTVReady LCD TV
I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help?
(I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)
Flat Panel Televisions
I cant get the programme up and down to work and wonder if its in txt mode but i dont know how to change to dtv mode
The two are usually not related---text is a mode for either captions or a black box on the screen and I presume you mean dtv not tvt. ...
Alba LDVD1538WDCH LCD TV
LG 42PQ3000 Having problem with the key lock, cant get it off, how do i get it off ? ive have sky plus hd and i have been useing the the remote to change the channel on my tv a dont know if that has trigged the lock key on or not ? Can you help me get the key lock off. And ever since the key lock has went on my television screen has split in to 2 1side is XD On and XD Off what do i do please help me
LG 42PQ3000 42" HDTV Plasma TV
I dont have the remote to my tv and i cant get to the menu so i can change the setting to cable so i can get more than 2 chanels. how can i get to the menu?
Only with the original remote. ...
Sharp 27K-S100 TV
I have a new flat screen Apex tv LE4643T I us AAT U Verse and want to use just the one remote control the U Verse, cant get the right code to make that work do you know what it is, I have to use two r
Apex Digital Flat Panel Televisions
I have a skandia remote and an lg television. how do i get it to work if i dont know the codes?
You could try to Google the model number of the remote with "manual" to get a owner manual which should have the programming instructions and a list of codes--keep in mind not all remotes will program for all equipment. ...
Flat Panel Televisions
The remote control does not power the TV on and off. Plus I have comcast cable and I can't get the comcast cable remote to turn on the TV. The TV was purchased from HSN 42" lc hdtv model # LT The Tv turns off and on manually but the remote worked for a little while and just stopped working one day. I changed the batteries as well
Tv remote probally have dead CPU chip,all remotes devices heavily depended on it CPU chips.Try website like Remotes.com to buy an exact remote or very close to the original remote. ...
Digital Lifestyle FA1B32Z 32 in. LCD Television
Panasonic viera th-42pv500b remote has stopped working again and would like to know if there is a way to reset the remote or something to get it working again
Unplug the TV from AC mains wall socket. This must set TV to a hard reset. Check after that. ...
Panasonic Viera TH-58PZ700U TV
Moved tv to another room, it was connected to a cable box. Now it is just connect to regular cable but the remote do not work. How can I program it to get more channels (it only get 2 channels since I moved it) without the remote.
SNK Magnavox 42MF438B/27 42 in. LCD TV
Does any one know where i can get cables to get this bad boy running?i bought it on ebay but it was withous canles and remote,thought it will be a regular scart cable but these sockets are a bit funny and not sure what cable shoud i get to connect it to sky or freevirw,thanks in advance
What is the name and model number of this television ?You could get this on Ebay\012if you dont have an account you will need to create one.\012 ...
Flat Panel Televisions
My Philips TV 42PF7421D/37 works great we have had it for about 6 years. I cannot get the remote to work so I bought a new Logitech remote and programed it online and it works the cable and DVD syste
Philips 42PF7421D 32 in. LCD HDTV
SanyOur house was struck by lightening and now I can only get sound from my TV when connected by the coaxial cable or the RCA (red/white/yellow) cables. If I connect the TV using the componant (red/blue/green) jacks then I get full sound and picture so I know the TV picture does work. Trouble is I do not have an extra cable box or VCR to connect the TV by componant cable. Is there any way to fix the TV so that the coax or RCA hookup will provide picture too aside from taking it to a TV repair
If your aerial is OK then your tuner has been damaged. A replacement tuner is going to be required. ...
Sanyo Vizon LCD-15A2 Television
I have a 27N-S100 TV. It was given to me with no remote. The Cable plug thing in the back is completely broken off, but I was told the TV could work perfectly by using the 3 colored cables (I believe they are called A/V cables: yellow, red and white?) and going through a VCR. I have tried endlessly to hook these cables up with my VCR and I am getting nowhere. Not having the remote, I downloaded the owners manual and read through it and it showed how to access the menu through the two channel bu
What you're trying to do shouldn't work unless the VCR has a digital tuner in it or your cable company still hasn't converted over to digital as of yet. You will need to get a digital cable box from your cable company.Connect the av cabl ...
Sharp 27N-S100 27" TV
Cant get the remote to work for menu options just started setting it up already programed to my direct tv remote now nothing is working or either remote t.v or direct tv remote
To diagnose a remote control problem follow these steps.1) unplug the TV power cord, count to five and plug it back in. (reboot)2) try to power on with ORIGINAL MANUFACTURER remote.if that works- your TV and original rem ...
Flat Panel Televisions
I have bought a HDMI cable and I cant seem to get my Prosonic to work with my pc. It works on other TV's
The cable works fine with dvd player.
Is there somewhere on the TV I shall activate first?
I am choosing HDMI on the TV by the way
How many HDMI Inputs are available on the TV?\012Also, are you trying to project your computer to the TV or get TV on your PC?\012\012I will assume the first scenario. The only thing I can suggest is that if there are multiple HDMI inputs then ...
Prosonic Flat Panel Televisions
I can only get one av on my TEAC CRT TV model No. CT-M711S and when i connect my set top box I cannot get it to work - i guess it needs a different av but I have tried and tride with the remote to find it but can't. When the av comes on screen there is a red arrow below it pointing down. I have tried the set top box that came with it, which is a TEACDigital Terrerestrial Receiver Model No. SDB440.
Also I have tried my previous set top box that I know works for sure because I had it working