Having problems with your Projection Televisions ?

I have Sony's 43 inch Projection TV, its model no is KP-ES43 ME1. Problem with it is that it has lost Blue color from its pictures. Anything that is of Blue color turns into different shades of Green color. But one important thing which i would like to share is that when we turns on PIP (Pictue-in-Picture) mode, images on the right side of the TV screen looks absolutely fine but Pictures on the Left side of the screen still have the same problem. I want to know what is the real problem and its

Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have Sony's 43 inch Projection TV, its model no is KP-ES43 ME1. Problem with it is that it has lost Blue color from its pictures. Anything that is of Blue color turns into different shades of Green color. But one important thing which i would like to share is that when we turns on PIP (Pictue-in-Picture) mode, images on the right side of the TV screen looks absolutely fine but Pictures on the Left side of the screen still have the same problem. I want to know what is the real problem and its

... Sony Projection Televisions

I have a Sony KP-57WS510 and am having problems converging. The red works fine however the blue cross on the outside colums of the convergence pattern is off to the left. I am unable to move these blue crosses far enough to the center to correct the problem. The picture on tv screen has a blue shadded bar on the left side and a yellow shadded bar on the right. I can temporarily correct the problem by turning the television off and then turn it back on. However, the problem does eventually return

The tv convergence board it is dead.The tv convergence board require replacing 2 STK convergence ICS and some or all of it resistors too.U have all the tools and also can do soldering ICS works?Yes,tries websites like Tvrepairworld.com,Tvrepairkits.c ... Sony KP-57WS510 57" Rear Projection HDTV

I have a problem with my PDP42x40000 it is with the power supply card the following components are damaged STR-F6467 capacitor 47u 35v resistor 0.22 ohm and when i changed this component i couldn't have a picture on the screen only the power led is on with red color and when i press on to have a picture it turns to blue color and go to red again i just wan to know what can i do to solve this problem this LG PDP42X40000 is on a SANYO plasma TV

... Flat Panel Televisions

I have Toshiba 57H94. For quite awhile, when you first turn it on, usually it only shows about 2/3 picture with a green or washed out color & then only shows the very top left corner of the normal picture, only magnified to take up that 2/3rds of the screen. You can fix it by turning on & off the TV 2 to 5 times. Once the picture takes up the full screen, the picture is great and then you can turn it on and off with no problem till you leave it set and totally cool off. When you're turning i

Something to see where problem might be: does set do this with a DVD etc connected to one of the audio/video inputs? ... Toshiba 57H94 57" Rear Projection HDTV

When I turn on the set, the right half of the screen is distorted. It flickers, different colors move from center to far right of screen, double images that appear as negitives and sometimes that half of the screen is very dark. Sometimes it will clear up for a second or two then go back to the problem. When the problem first started, it only lasted for approx 10-15 minutes then the picture was great. Now it takes 1-2 hours for it to clear up. Once it clears, I get a great picture. The lef

Hi,Symptom shows problem with lcd panel (screen) however, t-con board that is part of lcd panel could be defective and cause of these symptoms.T-Con board is located at top center of cld panel at rear and would be covered with metal shiel ... Samsung LN46A550 LCD TV

My Olevia LT26HVX has suddenly lost color control. It has been set with color temperature on Middle for all the time I have used the set. Yesterday when I turned the unit on, the picture is hot pink or magenta with little blue and no green. If I set the temperature to Cool, the color switches to mostly lime green with solid blue areas appearing as black. If I set the temperature to Warm, the screen picks up more blue but has an overall muted green cast with no red. If I select "user" for color

... Olevia LT26HVX 26 in. LCD Television

I just purchased a brand new M420nv 42 HDTV LCD LED and turned it on for the first time & the screen was white with blue vertical lines (very similar to a UPC bar code) on the left side of the screen. I tried to turn the tv off using the rotation dial on the side as the instructions state (for 3 seconds) & that doesn't even work. What is the problem with the tv? Is it a defect?

For sure a defect. You are looking at a T-con board that is faulty. Return immediately and get a different one. If it's within 30 days just swap out and avoid having to wait for a warranty repair!\015\012\015\012\015\012Please rate ... Vizio m420nv 42 in. LCD HDTV

There is a blue shadow (especially around on screen graphics, lettering etc.) when in HD mode. I attempted to align the colors through the color convergence but the blue alignment did not work. I also attempted to re-set the convergence to factory settings but that knocked all colors out of alignment. The actual picture is not that bad with a slight blue shadow on the video. Is there anything that I can do this side of getting a service tech to come out?

No.This tv have a convergence problems,it dead.The tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board,must be repaired by repacling 2 STK convergence ICS and some or all of it res ... Mitsubishi WS-65807 65" Rear Projection Television

Color smeared I purchased this TV in 2004 and it has been great. It worked great last night but when I turned it on this morning there was a picture but there were large globs of color on the screen with a big purple one in the center of the screen. At the very left edge of the screen there was a thin vertical stripe that looked normal. There appeared to be a horizontal line through the middle of the screen. I assume that there is a technical problem. Thanks Tom - [email protected]

... Philips 42pf9966 42-inch Hd-ready Flat Panel Plasma Tv

I have had my samsung LN40B530 for 2 days now (got it used) BAD IDEA I Know I just dont have the $ for a new one anyway... everything was fine worked perfect and all of the sudden the picture almost paused it was moving very slowly and the colors were blending strangely I turned off the tv and turned it back on. All i have now on the screen is vertical lines white, blue, red and green. no picture sound is still there as well as all of the buttons being functional. Just vertical lines. I am a ver

The T-CON board is the place to start. If everything else is working (i.e. change channels, sound, etc) then this is almost certainly the problem.\012It's possible the problem is the connector(s) to the T-CON board. Over time the co ... Samsung LN40B530 40 in. LCD HDTV

Blue Screen When I turn it on, I get sound, but no picture, just a blue screen. It use to be an intermittent problem, now it is constant.

Look for any loose contacts in RC jacks/sockets/Cable. Try changing the input device to something you are sure, works such as a DVD player. ... Flat Panel Televisions

I changed my two IC chips and three resistances on my Hitachi TV to fix color alignments. Now the problems is that yellow and blue double image are seen at the bottom of my screen with no much effect on the rest of screen. Manual convergence show a white horizontal and vertical lines with focal right horizontal end with red line no aligned, but if I fix this side, the left side is disaligned. So, I am lost. What can I do?, what is wrong?

Ur tv still have dead resistors parts,test all 12 resistors parts around the 2 STK convergence ICS and changes some more dead resistors parts or changes all 12 resistors parts for sure.If tv still have the same problems after tested and replaces more ... Hitachi 43FDX01B TV

"My Vizio VX42L HDTV10A has a picture problem when i turn on the tv, it it supossed to be blue but its just black, the tv turns on but the tv screen stays black. The tv does not want to turn off. I have to unplug it for it to turn off. The back light in on ..."

... Vizio VX42L 42 in. LCD TV

My LCDTV has a problem, Model number is 6626LCT, Now on to the problem, While doing yearly cleaning on my tv as normal, after i plugged it in it was normal for 40 seconds, It flickered and the screen went from Black to white on the input menu. while watching TV it's weird, All the other colors, Red,brown,green,blue, etc turn up fine, It's just the black that has the problem, Like i mentioned before Black is now white, or a fuzzy mix of red,yellow,white,green, or one of each on it's

Only suggestion is if set was plugged in when you did what you did--unplug it and any box or receiver plugged in and wait a while--plug back and let the equipment try to reboot. ... Sylvania Flat Panel Televisions

Samsung plasma PN42A410, First my tv would turn on for only about 10 seconds, the screen would turn grey as if starting then it would turn black and the set would shut itself off,2 days later it stays on, the sound works fine, but the picture looks like moving Monet master piece, mostly black and white and few colors, very psycadelic but not what I want. what's the problem

... Samsung Flat Panel Televisions

I have blue color bleeding into the screen at the bottom left side of the picture and also along the bottom left side. What could be the probelm?

It is a common symptom of light engine failure. ... Sony Grand WEGA KDF-42WE655 42" Rear Projection HDTV

Toshiba 42H83 42 in. Rear Projection HDTV had the hyper module capacitor problem that Toshiba put notice out about. Changed those then plugged set in picture came in the three lamps noticably showed green,red, blue at the bottom of screen noticed grey static area because TV was not connected to cable or other device. Suddenly TV turns self off, now when plugged in to outlet power light blinks three times set turns off with speakers acknowlegement(sounded like speaker). I apparently have power d

If you bought a hypermodule rebuild kit from www.TvRepairKits.com go back to their site and ask for help. If you just bought parts off the web and winged the repair its hard to ... Flat Panel Televisions

I had sound but no picture on my Element Electronic FLX 3211B LCD Television Set. I replaced two capacitors, and now I have lit screen by turning on the tv on the side panel. Remote does not control the tv and no indicator light are on. But the tv screen is lit. the indicator light and the remote controlling the set may be the same problem. Does anyone know how to fix this ?

You might have bad capacitors still that you cannot see. The only way to be sure is with an ESR meter. Check all the connections on the boards again to be sure that the sensor for the remote did not come off. ... Element Electronics FLX-3211B 32 in. LCD HDTV

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful

Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

My Samsung PN50A650 Plasma has a thin red and blue line running down the side of the screen and also shows a lot of red in the background when the picture is all black. Samsung tells me that the screen needs replace and its 1600.00 which is more than the TV costs. Any other suggestions that mey be able to correct this problem without the absorbant cost.

... Samsung PN50A650 49.96 in. Plasma HDTV

My sony flat screen works but when I turned it on the colors are blue and purple. Picture not clear but sound is ok. Colors are off.

Press "Input Select" on the remote control and select "TV Mode."\012Press "Menu."\012\012\012Press "Enter" to select "Picture."Use the arrow buttons to select \012"Picture Setting." \012Press "Enter."Use the ... Flat Panel Televisions

My LG led has had several problems, it started out with the left half of the screen flipping as if viewed from a mirror with the right part of the screen normal. After that, it displayed vertical colored lines (blue, yellow, black, white, etc) which went away and now it shows a vertical bar about 4 inches across that looks darker than the rest of the picture. I also noticed images burning in everywhere except that bar. I know it's a lot of issues but any help would be appreciated.

This problems are a very tipical of the coded pixels on the LCD screen panel passes through the board that call the T-CON decoder board to causing this problems.Vertical colors lines display on the LCD screen panel happen by itself.Yes.The T-CON deco ... LG 32LE5300 Widescreen 32 in. HDTV

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that

... Spectroniq PLTV3250 32 in. LCD TV

The color on my rear projection TV is a little off. I tried to fix it by pressing the 'test' button below the screen. I can move the red crosshair perfectly on top of the set green one, but the blue crosshair is tilted to the side. Is there any way to rotate the blue crosshair? If there isn't, can I fix this problem without spending a ton of money?

Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. Repair kits with instructions are also avail from ... Mitsubishi WS-65711 65" Rear Projection Television


Hi,I am sorry to hear regarding the trouble. I understand the concern, however this is a common problem with most of the Brands. I agree that Samsung customer service should accept these facts and should be willing to help the consumers. ... Samsung LN40A630 40 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2619 seconds