Having problems with your Projection Televisions ?

Once powered off (night or day), set will not power up except by intermittently pushing the power button (from 10-25 minutes). Have replaced bateries in remotes, checked menu functions, and disconnected VCR. Can you tell me what is the problem.



Answers :

Witut,
\012
\012Since this is a Sony if there are any problems during startup the standby light should be blinking an error code. It will blink at approximately one second intervals for the code (1 to 10) followed by a 3 second pause, then repeat until the power is removed. If your unit is not doing this you may have a problem with the power tact switch. You did not say if you were using the remote or the on unit controls to power the unit up. If the remote or the onboard switch do not work it is also possible that the standby power supply is bad or intermittent. This is located on the power supply board and unless you are an electronic technician you will probably not be able to repair it. Cost to repair would not be excessive.
\012
\012Thanks for using FixYa and for the great rating.
\012
\012hardrocko

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Once powered off (night or day), set will not power up except by intermittently pushing the power button (from 10-25 minutes). Have replaced bateries in remotes, checked menu functions, and disconnected VCR. Can you tell me what is the problem.


Witut,\012\012Since this is a Sony if there are any problems during startup the standby light should be blinking an error code. It will blink at approximately one second intervals for the code (1 to 10) followed by a 3 second pause, then ... Sony Projection Televisions

Hello! We have a Sharp 27U-F510. It has been working very well. We have only been using the remote to turn it on/off and for volume. We are using a digital converter box for channels. My wife tells me that she may have depressed and held the "lower volume" button prior to the problem. The TV turned off, and she noticed she was pressing that button. I have tried turning the power on with the remote and at the front of the TV. No effect. I have checked the power connection at the wall, an


The on\\off stwich may bad or powertransistor and eleccapacitor are bad ... Sharp 27U-F510 27" TV

My 32 inch phillips lcd tv thats about 6 years old. Last week the menu screen popped up and can't get out of it. I have tried taking power cord off and waited 8 hours. When i plugged it back in the menu screen went away for about 5 minutes then it started back up again. I checked to make sure menu button isnt stuck and took batteries out of remote to make sure it wasnt that but still keeps happening. How can i fix the problem?


... Flat Panel Televisions

Iam a tv mechanic i have got a sansui tv which has no blue colour on it. i check all related parts and found IC TDA9370PS/N3/A/1839. So i replace the IC with the same number and code. but when i power on the TV there was low light without raster. The remote control handset was also not functioning but television key was functioning. I had also done some factory adjustment. so i would like to know how could i rectify the problem


... Philips Portable Televisions

Hi we have an NEC HDTV Model: NLT-22HDDV4 We had a a blackout yesterday and since then when we turn on the TV we have sound and the menu functions work, however the screen is blank and pure white? Do you have any solution to our problem? Obviously we have checked all the power supplies, plugs, inlets and outlets from the TV but nothing has changed, screen is still white.


NEC "white" screen.Solution: Replace open circuit surface mounted fuse (1.25A) located on LCD panel.Remove cover on back of LCD displayheld by 3 screws.The fuse is located near the socket.Submited by T.Lyras Australia ... NEC Flat Panel Televisions

Hello, I have a XT-37 LCD TV, Manufacturer- Pixxel. The problem- doesn't power on- only red light is on- neither response to remote nor power on button. I checked the power supply -MT070A- replaced all capacitors - checked it with simulated load - works . I suspect the problem can be the control board - CV028E_V5. Please advise, Thanks,


... Flat Panel Televisions

Hi, Can anyone recognise or diagnose this problem we are having with our Samsung LA32A450 LCD TV? It wont power up, no power on lights. Switch on side of TV wont turn on. Remote wont power it up. This may be the key ..... My wife tells me that my 3yo was playing with the remote & the buttons on the side of the TV Would there be any strange combination of buttons pressed that could have rendered it useless? Could close proximity remote activation have caused anything?


Hi g_coopster,\015\012Samsung LA32A450 LCD TV wont power up or no power on lights that indicated that no power line.\015\012First of all, check the power line, cable AC cord is it installed properly, change ac cord if necessary. If you ... Samsung LA32A450 32 in. HD-Ready LCD TV

My sharp aquos led 32le240m does not power up i checked fuse and wire its all ok but its not power up plz tell me what the problem or inside there any fuse which i can change i am electrician. I check with testpin on stell screw its light means there is power inside but not working.nothing are blinking.


... Flat Panel Televisions

My thanks to Guest however as mentioned I have no problems using the SET-TOP BOX remote with my TV! I want to use my NEC remote as a stand alone; as I still have ANALOG reception? So disconnecting my SET-TOP and using my coax cable direct from wall socket to my TV I should be able to receive the ANALOG channels? and that's not happening; so when I use my NEC remote and go to menue the AUTO TUNE BOX DOES NOT DISPLAY! and that is the problem!


... NEC Flat Panel Televisions

My sharp aquos led 32le240m does not power up i checked fuse and wire its all ok but its not power up plz tell me what the problem or inside there any fuse which i can change i am electrician. I check with testpin on stell screw its light means there is power inside but not working.


... Flat Panel Televisions

My sharp aquos led 32le240m does not power up i checked fuse and wire its all ok but its not power up plz tell me what the problem or inside there any fuse which i can change i am electrician. I check with testpin on stell screw its light means there is power inside but not working.


... Flat Panel Televisions

PHILIPS Software /Hardware problem 32pfl5522d blue screen nothing works Checked the basics holding menu , Connecting av source i get nothing Just blue screen, psu looks ok. I also noticed the blue led flashes when pressing menue or program keys Only buttons what work are power and volume keys Any knowlege of this uncommon problem would be ace :D thanks !!


... Philips Flat Panel Televisions

My sharp aquos led 32le240m does not power up i checked fuse and wire its all ok but its not power up plz tell me what the problem or inside there any fuse which i can change i am electrician. I check with testpin on stell screw its light.nothing are blinking.


... Flat Panel Televisions

My tv brand is Vivo I got it from Australia about a month ago. Its 50" Plasma tv with HD Tuner. The menu setting and the source selection menu keep popping up on the screen and then it just change to different channels by itself like someone is controlling the remote control. This has been happening for almost weeks now. I turned off the power and unplugged the tv from the power source for a day and turned it on again but it gets normal for about 10 minutes and then the problem starts to occur


... Philips 50PF7320A 50 in. Plasma HDTV

Hello, My Hitachi P50H401 is having a problem where menus come up all by themselves. When this happens, the remote is in-operable except for the power on/off function. I suspect the remote board has solder joint problems. What do you think?


You can always trade in you tv's original remote control for a nice Universal Remote. \015\012\015\012There are many different manufacturers of them including ONE FOR ALL, and SONY and LOGITECH HARMONY, and you can pick them up at pretty ... Hitachi P50H401 50 in. Plasma HDTV

Hi. My Sony KDL32EX400 started to have unusual problems few months ago. Channel, volume, menu, setting, controls stop functioning. (The little green led is flashing when trying to switch channels or control volume, but nothing else happens.) The only function works is the power. After I turn it off it shuts off but sound remains for another 30-40 seconds. Also sometimes display info remains on screen after TV turned on then the same problem happens, as mentioned above. I have to note that it do


Hi,Does Standby light flash/ blink on tv when it does not show picture or any display in screen?If standby light blinks, please count how many times it blinks after three seconds long pause to diagnose possible problem in tv.And if ... Flat Panel Televisions

I have a RCA P61939 61 in. Rear Projection Television. Would not power on one day. Day before it would not power off and when the remote buttons were pressed they showed different then what was pressed (pressed 2 it would show the menu, etc). Was finally able to power it off, now it won't power on. I checked the fuse and it is OK. Now I was able to power it on and there is only sound no picture. About 20 minutes later the sound just cut out. Now nothing.Is this something I could fix m


With what you are describing I would start with the power supply. This is going to be a board, not a brick. If you can find the part online this is certainly something you could do yourself. Before you do anything back there make sure it is unplugg ... RCA P61939 61" Rear Projection Television

I have a problem using a VGA cable to connect a laptop to my Insignia 32 LCD TV (model NS-32E570A11). I have found that the TV will power-on but "freeze" if I have a VGA cable connected to the back of the TV (regardless of whether the other end is connected to the PC laptop or not. The laptop is an Acer Aspire One D255. By freeze I mean power light is blue, but no display, no response on remote or side buttons and this requires the power cable to be disconnected, the VGA cable disconne


There might be some garbage in the monitor processor, so unplug it from the wall for 40 min. and that should reset it back to normal. ... Insignia IS-LCDTV32 32 in. Television

Hicon HDVD22 (bought Jun 2007) Super DVD player, plays any type discs & works fine but remote control giving problems. Remote will only work if cold, ie from being in fridge. It works OK on all functions until it warms up to room temperature, then it stops working. Put in fridge for 10 mins at 5 deg C, then works fine until warmed to room temp of 20 deg C. Checked batteries/fitted new/checked & cleaned connections. Any ideas? if not can you advise the remote code no.for unit so I can use a new


Either it's a bad soldering (it makes contact only when the metal shrinks due to the cold) or the IR diode is dying. Take the remote apart and inspect all the solderings with a magnifying lens - redo all dubious ones.If this doesn't work then replace ... Flat Panel Televisions

My kids broke the remote that came with my vizio soundbar, I bought a universal that worked fine for about 6 months and now I can not get a remote to work with my vizio at all. I bought a new remote and it blinked to show it accepted the code but it will not work. My vizio soundbar works if you use the power button the top of it and the volume control, so can you tell me what the problem is?


Hello,The remotes you have purchased and tried, are universal remotes ? For an item like that the default remote that came with it would work best. I would email Vizio customer support and get a replacement. I had to do the same thing abo ... Flat Panel Televisions

Misubishi WS 73-411 video display blionks off and on (screen goes black, then picuture returns). Sometime remote control will not function to power on and off tv and also other functions fail to operate as in using menu function to make changes,


Hi,First of all, i would like to inform you that this is an internal failure and needs repair. The problem you are describing is most likely some bad capacitors on the\015\012 DM board / DM power board. If you are good with a screwdriver, ... Mitsubishi Projection Televisions

Hi Viewsonic, I have a N3751w ViewSonic LCD TV Model Number: VS11405-1M I am having a problem with changing the source. The TV will only remain on the TV setting which only allows me to use cable. I can not use any other device that is connected to the TV. The little source window shows up from time to time on the TV screen when I have not pressed anything on the remote. I can not turn off the power to the TV without disconnecting the power from the electric connection. HELP HELP HELP!!


Hi, well unfortunately there is no Reset Button as such, the TV is reset in the basic sense when turned OFF and completely so when removed from the Supply, ie: Withdraw the plug from the socket. \015\012Now if this doesn't work, then most likely you ... ViewSonic N3751W 37 in. LCD Television

I have a Vizio VA370M. My problem is that the vizio's logo stays on screen and none button of the tv or the remote control responde, it seems to be a problem with the lcd controller because at first i noticed that the cable that goes to the screen was a little loose and then it works ok but now it does the same thing again. I also tried disconnect the power cord and wait for some time to reset the tv but it not seems to work. The image looks great but again...the logo is still on screen and t


... Vizio VA370M 37 in. TV

Philips flat screen TV, model no. 26PFL5522D/05 went from fully functional to white screen with audio to white screen no audio. Menu button on side panel not functioning. DVD input not recognised. Hardware problem? Remote not working either.


Hardware problem, better to buy a new one instead of fix it. ... Philips 20 in. TV/VCR/DVD Combo Flat Screen

Toshiba 40RL953 smart tv I tried loading the Wi Fi function through a menu it stated loading then went back to the TV program and I couldn't get it do do anything I switched it of and on the remote then worked ok I could change channels and access functions, I then tried to use my xbox which is connected via hdmi and its now locked up the power lights on but nothing works.


... Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2414 seconds