Having problems with your Standard (CRT) Televisions ?

Dont have the remote and want to hook up to satellite dish, TV picture is great but dont know what to do? can I get another remote?



Answers :

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Dont have the remote and want to hook up to satellite dish, TV picture is great but dont know what to do? can I get another remote?


... Sony KV-27S65 27" TV

My tv is an old rca tv, i have a dish network remote, one of the kids locked out the tv and i dont know how to get it back on, it wont tell me a anything all i can do is change the tv with the remote, nothing else what can i do??


If I read your post correctly it sounds like, the remote no longer works the volume or power for the TV set. If this is correct follow the steps below for a Power Scan. If this is not the issue or the steps don't work feel free to contact me and we w ... RCA 32F531T 32" TV

I have a Hitachi 51F510. When I power it up it clicks like it always has and the power indicator light in the front comes on but it has no picture or sound. The remote will power the unit on but after a few seconds it wont power the unit off. I opened the rear panel and only saw a green light on, dont know if there is suppose to be more than one light inside. Any help on where to start would be greatly appreciated. the internals are filthy, going to get a can of compressed air while I wait a rep


You need to follow power cord inside the set; should be a board on right side it goes to----this set uses up to 3 small black relays---one or more is bad---tap on each until power light goes out.if questions let me know. ... Hitachi 51F500 51" Rear Projection HDTV-Ready Television

WILL A RCA UNIVERSAL REMOTE PROGRAM MY PHILIPS HDTV CAUSE I'VE TRIED AND IT WILL ONLY GET ONE CHANNEL, WILL I NEED TO GET AN ORIGINAL GUEST REMOTE RC2888/01 WHICH IS THE ORIGINAL! I HOPE SOMEONE WILL LET ME KNOW,AND IF YOU KNOW WHERE I CAN PURCHASE THE ORIGINAL PLEASE DO LET ME KNOW, I WOULD GREATLY APPRECIATE IT SO MUCH! THANKS


Http://cgi.ebay.com.sg/Philips-LCD-TV-Remote-Control-Model-RC2888-01-HDTV-/220487879208\012\012 ... Quasar SP-2723 27" TV

I disabled remote for soyo sytpt3227ab and get it to work? get on menu manually ,get to reset default and cant enter code(which i dont know) with out remote! cant get cable remote or universal remotes to work!?


... Soyo SYTPT3227AB 32 in. LCD TV

I have a videocon integra lcd which remote was broken but here in silchar assam i do not get the same and also i dont know the model no so kindly suggest me where to buy it or how to order it And kindly let me know how to get the modelno of tv Thnx No


... Flat Panel Televisions

LG 42PQ3000 Having problem with the key lock, cant get it off, how do i get it off ? ive have sky plus hd and i have been useing the the remote to change the channel on my tv a dont know if that has trigged the lock key on or not ? Can you help me get the key lock off. And ever since the key lock has went on my television screen has split in to 2 1side is XD On and XD Off what do i do please help me


... LG 42PQ3000 42" HDTV Plasma TV

My Sansui HDLCD3250 will not let me watch regular tv with my Dish Network. I can hook up my dvd player and picture and sound is great. Does anyone know how i can get my Sansui HDLCD3250 fixed to watch my dish network?


... Sansui 32" TV

Hi there,, i have a fine 27in akai tv, i have owned it for some 4 years now, model number is LCT 2701AD, with the factory remote MODEL KC02-A2...but somehow i inadvertantly with the afore- mentioned remote, set the tv picture up so it rolls on the left and right sides, and it distorts/stretches figures on both sides as things get close to each side, i never got an operation manual with this tv..so i dont know how to bring the picture back to the normal way it was before i got stupid..thanks for


... Akai LCT2701AD Television

I have an Emerson EWF2004 20" TV. We are using a RCA universal remote. I hit some button and know I have number in all four corners of the screen that I cannot get off. Therefore my dish network remote will not work either.


Hello -\015\012\015\012You've accidentally entered the service mode. You can exit service mode by switching the TV OFF using the main power button on the front of the TV. When you switch the TV on again using the main power ... Emerson EWF2004 20" TV

I bought a FX universal remotecontrol, model YA9-000165. I can't get my philips DCR2020 satelite receiver on to the remote. Do you know a code or another way to get it work?? Greetz A


... Flat Panel Televisions

I have a skandia remote and an lg television. how do i get it to work if i dont know the codes?


You could try to Google the model number of the remote with "manual" to get a owner manual which should have the programming instructions and a list of codes--keep in mind not all remotes will program for all equipment. ... Flat Panel Televisions

I cant get my bush tv to go to EXT1 i dont have a remote is there another way of doing it


If you did it before with out a remote it is either in menu or some sets have that input in the up down channel---go down channel to 2 and below etc. ... Bush Standard (CRT) Televisions

I won a rca scenium 52 inch hd tv.. i hit somthing on my remote and now i have a fuzzy scree. and dont know how to fix it.. i trouble shooted with dish network. they say it is my tv. but the dvd player is still working can u help ?


Hello. I do hope that you have gotten this resolved. But if not, here are some simple steps. \015\012\015\012If you are at TV1, where the receiver box is located, the tv needs to be on channel 3 or 4. Depending on the cable t ... RCA Scenium M50WH187 50" HDTV

JVC I'Art Pro the color's don't line up in the corners its like the red has a concave shape so there is a perfect picture in the middle but the corners are off, anyway what i need to know is how i can adjust this? the menu is not a lot of help." the normal adj. brightness etc..." i figure this is something i need to do mechanically in the rear of the unit or maybe replace something.any help would be great help. btw..... i did not get a remote with the TV. i will have it in a few days i


All projection TV sets have two very common problems. One is convergence ( 3D/Warped video or dead set) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. ... JVC AV-56WP30 56" Rear Projection Television

Some of the channels are in spanish now like disney channel. There is also a voice on every channel that says everything that everyone is doing and I dont know how to get rid of that. It all started w


Check with your provider 'cable' to see if they made a change in your service. ... GE 32GT740 32" TV

Some of the channels are in spanish now like disney channel. There is also a voice on every channel that says everything that everyone is doing and I dont know how to get rid of that. It all started w


... GE 32GT740 32" TV

Cant get off wide screen or ch 3 to go away. Dont have original remote


... Sanyo DS27590 TV

I have a samsung dvd surround sound, I am trying to connect my comcast remote to it, however NO CODES work for this. Apparently this model has a hard time using another remote. I know it works, because it worked with my old comcast remote, I just don't know what code was used! I tried every code comcast gave, but this samsung dvd player won't take it.


... Samsung Flat Panel Televisions

I have a really old sanyo tv. The roommate brought it with a universal remote, which will not work with the TV, and I also bought another universal remote that will not work either. I just want to get to the input mode so I can hook my wii up. How do I get to input mode without a remote or an input option key on the front of the TV?


Sanyo sets, especially the old ones are like this, if no button on set the only thing you might try is run one channel at a time below channel 2 to see if one of the upper channels is the video input, other than that you are done. ... Standard (CRT) Televisions

I do not have cable or anything. I need to know what I need to get to get my local channels on my Vizio flat screen. I tried hooking up an antenna but I do a scan and get nothing. I dont know hat to do, Im tired of watching netflix.


... Vizio M220VA 22 in. LCD HDTV

Batteries corroded in remote how, can i get another one?


... Dynex 32 in. LCD Flat-Panel HDTV

I have a panasonic fm radio omnivision VHS tv model number PV-M2037. I wasn't givin the remote when I had got it. I cannot get past the set up part the adds pop up on the bottom and I don't know how to hook my DVD player up to it. If anyone know what to do please help. Remember I have NO remote for it


... Combination Televisions

Moved tv to another room, it was connected to a cable box. Now it is just connect to regular cable but the remote do not work. How can I program it to get more channels (it only get 2 channels since I moved it) without the remote.


... SNK Magnavox 42MF438B/27 42 in. LCD TV

I cant connect my xbox 360 to my rca colortrak plus stereo monitor pip model f27676bc and i dont have a remote, i dont have a remote so i want to know how to cha nge the input maualy so i can play my xbox 360


Go to the manu in TV and put aux, and connect the xbox 350and try it. However will be a good idea that you will your instr. manual for tv download free.wwww.fitne ... Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1343 seconds