Having problems with your Projection Televisions ?

I have a Sony Wega KDF-E55A20 rear projection LCD TV. The screen stays black when pressing the Power On button. When the Power on button is pressed, a GREEN blinking light (5th light in a row of 5) comes on and blinks about 58 times, along with an intermittent "popping static" noise. It then goes to a STEADY RED accompanied by the 2nd light in the row of 5, BLINKING RED. It continues like this until I unplug the power cord. It will do the same thing if I plug it back in an press the Power On but



Answers :

It sounds that the SCL ' SDA signal path has some short. You must have thorough knowledge in electronics to follow. Checking I2C bus signals is a skilled work. If you wish to get more details, check this\012site. Pull up older posts there. Check the site with patience, as it has over\0122350 posts now. All are related to\012electronic equipment repair help. \012Search the site by 'Timeslide' option. \012It will make search easy.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Sony Wega KDF-E55A20 rear projection LCD TV. The screen stays black when pressing the Power On button. When the Power on button is pressed, a GREEN blinking light (5th light in a row of 5) comes on and blinks about 58 times, along with an intermittent "popping static" noise. It then goes to a STEADY RED accompanied by the 2nd light in the row of 5, BLINKING RED. It continues like this until I unplug the power cord. It will do the same thing if I plug it back in an press the Power On but


It sounds that the SCL ' SDA signal path has some short. You must have thorough knowledge in electronics to follow. Checking I2C bus signals is a skilled work. If you wish to get more details, ... Sony KDF-E55A20

Hello, I have a Toshiba 57H84R rear projection tv that has developed a problem. Occasionally the screen would turn bright blue for a couple of seconds and then go blank (dark screen, like it had shut off). The red power button would go from a steady red light to blinking continuously and would have to be unplugged, then plugged back in to get it to come on again. One time it did this, there was a bright blue circle in the center of the screen and now there is a permanent yellow spot in the cente


I am 100% sure that this is not an issue with the CRT board(the tiny board attached behind the CRT's in this case the blue CRT). The problem is usually caused due to failure of high value resistors 500K-ohm or higher. Do you have an ohom-meter and kn ... Toshiba 57H84 57" Rear Projection HDTV-Ready Television

Sylvania LC260SS8 red light on steady, hit power button and it blinks green a few times and turns back to red. What is wrong and can I maybe fix it?


... Sylvania LC260SS8 26 in. LCD Television

My panasonic flat panel tv with model no. TH-L32c20x has a power problem.. i push the manual button on tv side,the red light is on..then second is the remote power,the green light come and blinking 20 times,then turn to red light blinking slowly, the power not goes in, i unplug and plug again,try the same way its not working..


... Panasonic Flat Panel Televisions

Blinking red Red light blinks 14 times. Unplugged from surge protector box, waited several hours and replugged. Red light still blinks 14 times. So I unplugged it and plugged directly into an outlet. TV clicked when I hit power and red light is on and steady. Will not turn green, still no sound or picture.


What is the brand name to your TV? Provide more details please. If you wish to get more details, surf this link.\012http://electronicshelponline.blogspot.com/\0 ... Flat Panel Televisions

Have a lg 20ls7d 20 in.power problem .theres power to the tv.the red light in frontis in .i hit the power button on top green light comes on then blinks 5 times screen cums in or a second then goes off.so does the green light .but the power light in the front wont come back on unless i hit the power button on top again.like i was turning the unit off.any ideas?


... LG RE-20LA70 20 in. Analog TV LCD Television

WhaWe have a Panasonic Model TC-P42G25 TV. We were watch the evenings when all of a sudden the tv went out and the red power button was blinking. I thought I heard a snap but an not sure. I unplugged the tv for about 10 minutes plugged it in again, the light was out. When I used the remote to start it. The red light started blinking again. I also noticed that when i plugged it in I you could hear it what i would say energize the circuits. No response other than the blinking red light.


The blink code asked for by another expert would help--but if you heard a pop and the set is out commonly this is the POWER supply board in the set failing--not unusual.Individual parts are not sold for these sets and generally this will be a ... Panasonic TCP42G25 42 in. TV

I have a Sony KF 50 WE 610 projection screen TV. It has worked perfectly since I bought it six or seven years ago. This morning I turned it on and the sound came on for a second, but then the sound went off and nothing else happened for about one minute. At the one minute mark it turned off by itself and the red indicator light blinked 5 times in a row... paused... blinked 5 times in a row... paused... and then blinked 5 times in a row again. When I powered it up again, the indicator light blink


Hello\015\012Five consicutive blinks at a time and the stops and again blinks five; is its self diagonosis procedure. All modern Sony sets has this function included in its circuits. If the system control IC inside it detect any fatal fault ... Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

The tv is approximtely 7 years old. It has rescently been unable to turn on. All the power sources are good. The button to turn on will light up red, and the tv will power up, with no picture. Then suddenly the tv will shut off and the red power light will blink on and off then go off. Any thoughts?


... Panasonic PT-53WX42 53" Rear Projection Television

Red light blinks six times. When I hit power button green light stays on for a few seconds, turns off the on for a few more. Then goes back to pattern of red light blinking six times.


The kill switch is open ensure the lamp cover presses firmly on the kill switch when u close the lamp chamber door the red light will stop blinking and u can now turn the tv on ... Projection Televisions

Pioneer pdp 434pu - can't turn on tv. 7 flashing red lights where power button is. 3 years ago it has 6 flashing red lights and it was a power supply issue, I found one and repalced it for under $200, now again, it maybe on it's last leg. Does anyone know what 7 blinking lights mean?


... Flat Panel Televisions

When i turn on my LG 32lg30 on, the power indicator light flashes red 4-5 times, then the monitor turns on to a steady dark blue color. I tried to press buttons on the remote but there is no display.


Now there is a challange.My LG has not shown this behaviour yet. Do you still have the DVD disk that came with the TV.If you do you will get your answer there I presume.Make sure that you are using the correct input.kollagunn ... LG 32LG30 32 in. LCD HDTV

Lcd tv ld 55ld520 wont power on . when power button is pushed red light blinks a few times and when the blue light blinks itt shuts down.


... LG 55LD520 55 in. HD Ready LCD TV

What's your problem? Tv wont turn on the little red light next to the power button is blinking Turn it off two days ago to sleep and in the mornin tryed to turn it on and nothing i try pushing the


What is the model of your tv? ... Flat Panel Televisions

Sony LCD TV Model #KLV-23HR2 The timer LED blinks red constantly after having turned on the TV. THe power light stays steady green for about 5-10 seconds then the red light keeps blinking constantly.


This is a common problem an a failry easy DIY fix. \012\012Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your ... Sony WEGA KLV-23HR2 23 in. LCD HDTV

14 blinks So my 42" viera smart tv that I Purchased about a year and a half ago will not turn on. When the power button is pushed the red light comes on and nothing happens. If I hold the power button after that it blinks 14 times. What would you suggest?


Communication\012error DG Board with IC8001 (Pesks Lite 2) is the fault. To follow, you must have sound in electronics. If you have, check http://electronicshelponli ... Panasonic Flat Panel Televisions

No power to tv. When i press the power button i only get a blinking green light then it stops and the blinking red light for lamp flashes and keeps flashing


You need to replace your lamp. Also check power supply and ballast board. Most of the time if you replace the lamp it will come back up. After replacing the lamp you will need original remote to reset lamp hours. ... Sony KDS55A2000 55" HDTV

I borrowed a Sharp projector PG-M20X. When connected, the Power indicator (red light) is blinking but when I push on the button, nothing happens. Normally, shoud the power inidcator blink or not ? Does the blinking indicates some special condition. I have read the troubleshooting section of the operational manual and it is of no help. Thank you.


Red light blinking genreally indicates a problem with the bulb or the fan ... Sharp LC65D64U 65 in. LCD TV

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

Toshiba 52hm94 when powered on continuously shuts on and off with blinking red and green light and static noise


That happened to my old LED tv it was the tubes that have gone go into currys and ask an expert thats how i found out what was wrong with mine ... Toshiba 52HM95 52" HDTV Projection Television

My tv keeps turning off ever5-15 minutes and the red power button just blinks frequently and the lap light is blinking red how do I fix this?


... Panasonic PT-60LC13 Television

Magnavox 40 LCD tv red light blinks 14 times then does nothing...can not find anything in manual about it...what does it mean. ..grrrr... No picture , no sound. Just a blinking light when you push the power button ..has had less then 24 hours of use .


... Philips 40MF430B/F7 model Magnavox LCD TV, 40 - widescreen Diagonal Size, TFT active matrix Technology, 1920 x 1080 Resolution, 1080p FullHD Display Format, Progressive scanning line doubling Progressive Scan, 3D digital Comb Filter, NTSC Analog TV Tuner,

Samsung LN40C610N1F. When plugged in, the red standby light comes on, but when I hit the power button the unit will not power on. The light doesn't blink or anything.


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... Samsung 40 LN40C610 LCD TV

My toshiba 50hpx95 has a steady blinking red light, it has no pauses or breaks to recite a code, just steady blinking. I had it in the shop and they said the power board needed replaced, so i replaced it and still get the same code. Is there a trap reset, or other mode of reset that i am not finding in the "service" manual, or was the problem misdiagnosed by my repairman. I cant even do a boot via service code thru the remote. is there a way to do a soft boot under low voltage so the chip can gi


This tv have a Tuner signal board it is also dead too,this problems happen sometimes,the power supply board dies,but sometimes the Tuner signal board take power surges from the power supply board itself than kiill the tv Tuner signal board too.Try we ... Toshiba 50HPX95 50 in. Plasma HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8362 seconds