Having problems with your Projection Televisions ?

I have a sony KDF-50we655 TV first the lamp when out, then I replaced that, now it will just turn off then on and this will continue till it stays off



Answers :

If the stand by light is blinking 6 times, it is the "Thermal Fuse", cost is about $4.95 shipping could be $15.00, if you take it to a technician you will pay around $300.00. It is easy to do it but depends how patient and skilled you are. The thermal fuse burn out when your tv ventilation is defective due obstruction on the vent and ventilator, due dust, hair etc. Make sure you clean very well everything inside and out when replacing the thermal fuse. Please check with your manual about description depending of the light blinking and times blinking.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a sony KDF-50we655 TV first the lamp when out, then I replaced that, now it will just turn off then on and this will continue till it stays off


If the stand by light is blinking 6 times, it is the "Thermal Fuse", cost is about $4.95 shipping could be $15.00, if you take it to a technician you will pay around $300.00. It is easy to do it but depends how patient and skilled you are. The therma ... Sony Grand WEGA KDF-50WE655 50" Rear Projection HDTV

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

POWER I TURN THE TV ON AND IN ABOUT 5 MINS. THE SET SHUTS OFF, I HAVE TO TURN THE POWER BACK ON AND WAIT TILL THE PICTURE RETURNS. AGAIN AFTER A FEW MINUTES IT SHUTS DOWN AGAIN IT WILL DO THIS FOR ABOUT 6-8 TRIES THEN IT WILL CONTINUE TI STAY ON .


Trouble is in main power supply and likely puffed up filter capacitors on that board---common issue in a lot of sets.Let me know if you have questions. ... Panasonic Projection Televisions

Television picture will not turn on, stays in warm-up/standbye mode, red light flashed 6x's pauses and continues...Sony KP-51WS500 51 in. Rear Projection Television


6 blinks is indicating that the flyback has failed and will need replacement. You can get the flyback for that model at www.tvrepairworld.com ... Sony KP-51WS500 51" Rear Projection Television

Sony Wega KDF-A50E10 will power on normal then after five minutes the green light will flash about 50 times then the screen and sound will come back on. It does continuously throughout the day. Sometimes it will stay on all day with no problem. Replaced the bulb one moth ago, and problem started 2 weeks ago.


... Sony Projection Televisions

HI, I've just changed the lamp for a Sony Bravia KDF-E42A11E because the image was way too dark. I bought an original XL 2400 and replaced it properly. But the image is still quite dark, better, but darker than usual TV, especially 1 second after each switch of channel or after I turned it on : it darkens from the edge towards the center. I also notice the old lamp was opaque : I cleaned it till it has reflections again from all sides, carelly cleaning it dry with gloves : maybe it was'nt that o


JAI KUMAR ... Sony Grand WEGA KDF-60WF655 60" Rear Projection HDTV

I have a Sony KDE-50E2010, i replaced the lamp last year and it has worked fine until now, After about 10 Minutes of viewing the T.V. turns itself off and the standby light flashes red, green, red, stays green for a second and repeats. I've cleaned the lamp area and fan but still no luck. HELP PLEASE!!


... Sony KDF-50E2000 50" HDTV

Thank you i have an lg 32ld550 and its tuning off suddenly, i replace the power cord and nothing, i verified the configuration about the sleep timer and nothing, i proved with a power regulator and nothing, continues turning off automatic. for the first time take a time to doit but after its turn off the first time continues doing it every 10 or 20 seconds. i want to know if i have to replace the power board how i can do it myself. its a little expensive carry out to a technician


... LG 32LD550 32 in. LCD HDTV

My mitsubishi high-definition projectile tv serial #wd-60767. when turned on the little green light on front pannel starts blinling green till picture comes on screen, then it stays solid green un till cut off. now when i turn tv on green lights starts bling green as usually but no picture comes up on screen just sound only. green light then turns solid as usyally and then turns solid red. tv has no picture sound only.


... Mitsubishi Projection Televisions

Sony wega 55in. turns on and off every minute and power light stays green


What is the exact model number to your Sony WEGA? ... Sony Standard (CRT) Televisions

Mitsubishi Wd y57... replaced the lamp 2-3 years ago... tv turns on for a minute or so, then turns off with solid red light on the panel. Turn it back on after a minute or 2, tv stays on for about 30 seconds and repeat. Picture is fine while the tv is on, but it doesn't STAY ON!


... Mitsubishi WD-Y57 57" Projection HDTV

I picked up a Mitsubishi Model No. WD- 62527. The guy said all it needed was the lamp replaced, I replaced it and the tv still doesn't turn on. Their is a green light that blinks were it says timer for about a minute then the orange light under lamp turns on. About a second later the green light under timer blinks three times then turns off and then the only light on is the lamp orange light. It will continue to do this hole scenario over and over again...HELP!


... Projection Televisions

After reading several forums when my LG 42PC3D died, I went in thinking I had the answer. It would turn on, but then off immediately. The Y-sus board had a blown fuse. I didn't want to risk frying anything else, so I replaced the board rather than just replacing the fuse. When I disconnected the board, it would turn on and stay on. Now, with the new board, it powers up as soon as I plug it in (doesn't actually turn on, just powers up) but won't do anything. The screen is backlit with just


Y and X-sus boards should be replaced at the same time due to they way they communicate with eachother. I suspect that the x-sus is also faulty.Thank you! ... LG 42PC3D 42 in. Plasma Television

Hi, can you help me with this TV please. Hi, I have a Olevia 232-T11 LCD TV. First my TV wouldn't turn and the blue light just stayed on. I replaced the power supply board and now my TV turns on and the screen lights up but I get no picture or sound. The slave backlight inverter board has a blue light when you turn the TV on but goes away shortly after. The screen stays on but I have no sound or can't control the channel, volume or source button. Please help.


If the tv is not coming on but there is no picture or sound then it is a 100% guarantee that its a problem with the audio/video main board of the tv. I am sure that replacing the same would resolve the problem. Please get me the part number that is p ... Flat Panel Televisions

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main


Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

My Panasonic 61 inch projection tv will not stay on. I replaced the lamp, but that didn't resolve the problem. It will come on then picture and sound goes out. The green light stays on until I turn tv off. I wait for the red light to stop blinking, then turn it back on. It may stay on few minutes or few hours...HELP


... Panasonic PT-61LCX65 61" Rear Projection HDTV

Sony rptv pico fuses keep going out whenever i plug a cable wire or video input? i just replace my sony convergence IC chips today and 2 resister, i turn the tv ON and it came on then i plug in a cabl


Still working on this set? Did you get a spark when you attached or tried to connect the cable wire to the coax cable fitting? ... Sony Projection Televisions

I have a Sony KV-36XBR250 TV and when it turns on the picture and sound are flawless, but I'd say about 45% of the time it wont turn on. Just blink the red standby light continuously...What's


... Sony KV-36XBR250 TV

MY SAMSUNG LAMP BUSTED AND I REPLACED IT, I TURNED IT ON AND IT STAYS ON FOR ABOUT 5 SECONDS AND TURNS BACK OFF, LAMP LIGHT AND ANOTHER LIGHT STAY ON ON THE POWER BUTTON.


Is this a projection TV or the LCD\015\012do you hear a clicking sound? if so, it's most probable the problem may be your ballast, that might not have enough voltage to keep on with your lamp, and that's why it shuts off.You could try rep ... Samsung Flat Panel Televisions

The lamp has just been replaced and now the tv will only stay on for 30 minutes and then turn itself off. The lamp indicator light is red. We can turn the tv back on and the light goes off. Six months ago the optical engine and the lamp were replaced. That lamp only lasted six months and the picture went dark.


Did you press the System Reset button with a ball point pin on the front of the set? You might have a ballast going bad if it has never been replaced. But first, the reset button then you may have a thermal switch which is located just above the la ... Mitsubishi WD73727 73" HDTV

My tv model sony trinitron KV2192M3 suddenly turned off and remained with a hissing sound.I then replaced FBT and the problem seems to be solved but after one month same problem occured, this time it was not FBT but i noticed protection fuse N25 from B+ and fusable resistor near fly back which is connected to 200v supply to G1 control grid is blown off. After replacing these fuses FBT tuned on but there was excessive brightness on the tv screen with sound ok and after little while tv turned off


Hello, First appreciate your work that you done yet, Secondly, According to the symptom please check the given two solutions:1- Check At FBT ABL resistance value .47ohm find and replace it.2- At C Board mounted on the ... Flat Panel Televisions

Vizio GV47L...when i turn on the tv, the screen stays black. The vizio light turns white and it makes the click noise like normal but after a minute of it doing nothing the light turns back to amber. I can turn it on and off using my remote. I read other problems where people had to unplug there tv to turn it off. Mine will turn off. Would the problem be the power supply or the motherboard. The slave inverter was making a squeeling noise and i replaced it like 2 months ago.


... Flat Panel Televisions

Sony kdl-32l504 turns on and then immedietly turns off. Power light turns green when plugged in and tv makes a click and turns on. Once turned on, the tv stays on for about 5 secs then the screen turns black and the green power light remains on.


Check the 3.3 v standby voltage is there or intermittent low, We found the capacitor C9101 on the H2 board (LED/IR Board) has leakage that will cause this problem. ... Sony Flat Panel Televisions

My dp50747 started turning off, i could hear a click, if i hit the corner of tv it turns back on, then it finaly stopped turning back on, i can wait a few minutes and turn it back on but it turns back off. will stay on if no antannea,dvd ect connected to it.. replaced sub power board. no change.


You need to replace the primary power supply board..or you have cold solder on it. try to resolder that part ... Sanyo DP50747 50 in. Plasma TV

I have a SONY KF-WE50 rear projection tv, a few weeks ago it started to turn the pic and sound off while the green light was flashing around 30 times. After the light finished flashing both the picture and sound came back. It repeated this 1-3 times just after turning the tv on. We continued to use it as is and now the both pic and sound turns compleately off and a red light is flashing at the front. Non will come back again. If I plug it out (as this is the only option to turn it off) and leave


The green is the reboot process and is normal.the red light is an error code indicator.count the blinks of the red light...it cant be 30 times (I think)it will blink a sequence, pause, then do it again for a total of three times. ... Sony Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1847 seconds