Having problems with your Standard (CRT) Televisions ?

I have a 22ls4dLG tv and i am unable to retune the channels after the switch over to digital all i get is a on screen message saying not programmed how can i retune in autotune

Answers :

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a 22ls4dLG tv and i am unable to retune the channels after the switch over to digital all i get is a on screen message saying not programmed how can i retune in autotune

... Sony FD Trinitron WEGA KV-36FS120 36" TV

Had power cut when tv was on. Now comes on but black screen and then snowy screen then says not programmed. Can't get remote to work on side control buttons so can't get into menu to try and reset or retune. What is wrong? What can I do?

It is possible that when the Power supply failed the MEMORY WAS ERASED and so the programs that were memorised on the TV was lost.\012Remove the power plug and push down all the controls to drain off residual voltage from the processor to allow ... Flat Panel Televisions

I have a symphonic flat screen tv. i am trying to connect it to a comcast cable box. i keep getting a message... protected program by TV-G. what does that mean and how do i get it off the screen.

Check the set by any other cable connection or use any AV input if you receive proper picture than your TV set is o.k,problem is with cable box,contact cable service provider to solve the problem.Also check by simply removing cable box the message wi ... Symphonic Standard (CRT) Televisions

I am trying to record on an external hard drive which was sold as a bundle with this but: 1. The REC menu is grayed out and wont let me do anything on it, and 2. when I plug the external drive into the port, I get a message on screen that says WAITING FOR USB CONNECTION and it stays there forever and wont let me do ANYTHING. I have to turn off the set top box and remove the USB cable before the message goes away! The owner's menu doesn't mention this message at all so it's VERY frustrating!

1. The REC menu is grayed out because the box doesn't have where to store the recorded file. This happens because2. The hard disk isn't recognized as present: the WAITING FOR USB CONNECTION message signals that the box can't communicate proper ... Flat Panel Televisions

I keep getting a massage on my screen that says the set-top's hdmi port requires an hdcp compatible tv input.I brought a 80 dollar hdmi cable and I get the massage so then found the hdmi cable that came with the tv so I used that one and still get the same message

... Flat Panel Televisions

My JVC HD-56G886 is stuck in split screen mode with a message on the top that says D.I.S.T. Dynamic Gamma and one side of the screen is "off" and one side is "on." It is like a display in a store to show the benefits of Dynamic Gamma, but I can't get rid of it.

Go to menu then find auto demo and turn it off ... JVC HD-52G886 52" Rear Projection HDTV

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t

If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

My Samsung plasma tv remote is locked. A message comes across the screen saying, locked. When I push the on/off button on the tv, I get the locked message also. The model # is PN43E440A2FXZA

My tv went black. What should I do? ... Flat Panel Televisions

Bush bu11fsrhd32 when i go to record i get a message on the screen saying. "unable to record not recieving a signal" then i attempts to get a signal from around the country and its a pain trying to stop it

... Bush Flat Panel Televisions

Unsupported content while watching a 1080p movie via usb..a notification appears at bottom of the screen saying"unsupported content" how do i get rid of the message.??? movie is running fine.please help

... Flat Panel Televisions

Occasionally we get a message on screen saying that thepower will be switched off in so many seconds and to press any key to stop the count-down. Please would you advise us?

Hi there, it sounds as though the sleep timer has been set. Look through your menu's on the tv, on my 26" sharp aquos, its in the setup menu under timer fuctions.Hope this helps ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

I can't seem to find the right code to program into my illico to get the dynex tv 32" to work. The tv has a blue screen that says no signal. Illico is RT-U49C-15+ and the dynex is DX-32L152A11. I've tried all the codes that are suggested on the dynex website and the codes on the vidoetron website. I've also used the CH+ and CH- buttons. Thanks Donna

... Flat Panel Televisions

I have a 22' viewsonic tv. i'm getting a "channel blocked" message with four boxes showing. tv is about 2-3 years old. prior to this the tv will power off then on with a blank white screen. you can still hear the program. the only way to solve this is to unplug the tv and replug again. then it will work. but this time I push the channel up and down button before the tv could turn itself off. this is when I got the channel block on all stations with no sound.

... ViewSonic N3751W 37 in. LCD Television

My HD cable box, Scientific Atlanta Explorer 8300HD recently had an automatic upgrade. I followed instructions and selected 1080p resolution. I now have a "not supported mode" message on the screen and can't seem to get it back to normal. I'm guessing that the TV is 1080i and this is why it doesn't work. Can I reset the TV to its original setting? The cable company says the cable box is working fine.

Hi!\015\012No, your TV is actually 720p. \015\012http://reviews.cnet.com/projection-tvs/samsung-hl-r4266w/4507 ... Samsung HL-R4266W 42" HDTV-Ready Projection Television

When I attempt to set a recording and I start by pressing CABLE-SETTINGS I get a message on screen saying "This feature is being restored and will be available shortly" This has been going on for four days now. Something's wrong!!!

Hello\015\012What is the brand name and model number of your TV? Without it how can I post a solution before you? Send me these details by Fixya please. ... Flat Panel Televisions

My Durabrand dwt1304 was hooked up to cable. I now have relocated the TV into my workshop and am attempting to hook it up to a digital converter and an antenna. Turning the TV on, I am getting a "Helpful Hints" message on the screen that asks if I have performed an "AUTO PRESET CH". I found this on the remote's menu and ran it, after which the screen gets the message, "NO TV SIGNALS". At that point, I can get the TV to do nothing else. Trying to run through setup with the digital converter

I suggest to go back to the menu and make sure in the connection or signal type to select antenna.. Since you had it hooked up to cable it may not have been selected to go back to antenna. Hope this helps you out. ... Durabrand DWT1304 13" TV

I have an LG 42PG20....One day it froze and would not turn off or anything....I unplugged it, and when plugged back in, it just flashes a bubble message saying FRENCH all over the screen. When I try to push any of the buttons on the tv, it says DVD HT. Behind the messages is just a blank black screen. Please Help!

Make a quick call to LG with that model number--most of their sets have a way to do a manual reset of the TV. ... LG 42PG20 42 in. Plasma HDTV

Error message on screen that says PO 1.15 V100

The error is likely to be from the satellite as the set model listed does not have that kind of error. ... RCA P52926 52" Rear Projection Television

I can see a message on the screen that says "upgrading available service details" tv model is sharp lcd colour tv LC 19D 1E-BKvailable service details". help

... Flat Panel Televisions

Message in center of tv says "No Programs are Shown> when turned on

... Flat Panel Televisions

I can't get the Pause-Live feature to work. I am using a 4 gig Lexar drive. When I try to pause it I get a message that it only works on digital programming. I am on a high def channel when I get this message.

... Vizio VM230XVT 23 in. TV

Our TV screen has lost all pictures. There is a blue banner on the screen with the following message; "Illegal handle used in connection. Please retry later. (TEC:10)" This fault appeared approx 23 hours ago and still the same message appears on the screen. Can you please advise how we can get our service returned. Thank you

Hi preid1048,\015\012\015\012May you please pull-out all the connectors from the back panel (cable,dvd player, etc.) then power up the unit, let me know what happened.\015\012\015\012JDVillanueva ... Flat Panel Televisions

Vertical white lines appear on the screen. Samsung provides the following information but doesn't say what circuitry they are referring to. Samsung says: DLP TV: I Have Vertical White Lines Appearing On The Screen When I Watch Video, TV, Cable And DVD. If you see vertical lines on the screen of your DLP TV similar or identical to the pictures below, the circuitry controlling the vertical hold has failed, and you need to get your TV serviced. Please click here to go to our online service r

That answer I agree makes no sense.Most of these sets have NO vertical hold and if did it will not cause the lines.A brief educated guess:Set has a main board that communicates and controls the screen--tests for that are not s ... Samsung HL-S6187W 61 in. HDTV

I have an nice tel pm-rc4 universal remote that i would like to use on my admiral tv so i can get to the menu to put on the closed captions on the screen since i since become hearing depaired. i do not have the original remote for the television and there isn't a control panel on the tv to get to the menu screen. could you please help me get the code and instuctions to program the remote. thank u so much!!!!

... Flat Panel Televisions

This message keeps popping up on the screen: no programs are shown

... Insignia Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1553 seconds