Having problems with your Standard (CRT) Televisions ?

No power,no light indicator when power switch on voltage is present in secondary



Answers :

It sounds that the 5V regulator section on circuit board has the fault. Check it.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

No power,no light indicator when power switch on voltage is present in secondary


It sounds that the 5V regulator section on circuit board has the fault. Check it. ... Sony FD Trinitron WEGA KV-32FS120 32" TV

Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions


Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ... Flat Panel Televisions

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.


... Flat Panel Televisions

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.


... ViewSonic VPW425 42 in. Plasma HDTV

I have anew Sony 40 inch EX 520 series Led warranty not valid in India since purchased in Bangkok. The power standby light goes of very often and the Tv goes dead. If I switch off the power supply for couple of minutes and switch it on again the stand by light comes back on and TV functions normally. The TV is also very sensitive to voltage fluctuations and on Inverter power supply. Please let me know what could be wrong and how to solve this problem. Thanks


... Flat Panel Televisions

My Sharp Aquos LC-60LE847U lcd TV has some kind of controller issues. At times when we turn the set on using the remote, the indicator light will light but the TV never has sound or picture. It never "turns on". Then when you try to turn the power off, neither the remote nor the manual switch on the set does anything. If you fiddle with the power enough, the indicator light on the bottom bezel of the set will start flashing 3 blinks then one blink and keep repeating that. Unplugging the set


... Sharp Aquos Flat Panel Televisions

Tv plugged in and switched on, No standby light comes on there is a small red light on in the back of the set which would indicate power getting in but not switching on, Is there a fuse inside the unit or is it a throw away job ???


I HAVE A LG -HD TV AND THE POWER WILL NOT COME ON , THE POWER SWITCH CLICK ON AND THE RED LIGHT COME ON BUT THEN GO RIGHT BACK OFF ?? WHY IS THAT , ... LG RU-42PX10 42 in. HD-Ready Plasma Television

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

My Hitachi P50x01au plasma TV screen goes blank suddently, and the power indicator green light blinking. TV cannot be turn off by the remote. I switched off the power manually, and turn it on, but the green light still blinking with a black screen.


... Hitachi Flat Panel Televisions

The TV doesn't power up anymore - i've checked the cord connection, made sure the power switch is in the "on" position, etc. basically ran through all the possible troubleshooting solutions. the little amber power indicator doesn't even light up anymore so it seems there no power registering into the unit at all (i've checked the outlet too). any suggestions?


... Maxent MX-26X3 Television

I have a panasonic sophia tv model - TC21S150Z. When i switch on from cold, the screen flicker with a flash light and went off but the power indication is still on. When i switch off and on again the tv is working normal. Always i have to switch on two times. What is the actual problem of the tv.


... Panasonic TC-21S80RQ TV

I have a cornea 47" tv that wont' switch on only the standby light remains on


... Sony Flat Panel Televisions

Sharp 60" LED, LC-60LE630M - after pressing the power button, the green indicator light is up for only 5 minutes and then switch to red blinking light. Screen remains in black colour.


... Sharp LC-60LE630M 60"FULL HD MULTISYSTEM LED TV

Hi there, my sony grand wega kdf60wf655 had stopped working and was flashing 5 red lights. I tested the voltage from the power board to the lamp ballast board and got a 272v dc. Just replaced the lamp ballast board and now get blinking lamp indicator. Tried a new spare lamp that i had in reserve and still flashing red lamp indicator every 1 second. Any ideas? thanksp i


... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

Sony model KLV-32S400A had a power surge primary voltage is present however secondary side of switchmode not present no 24volts no 12volts no 5volts and no 3volts do not have the schematics in the service manual please help


... Sony Bravia KLV-32U300A 32 in. HD-Ready LCD TV

Apex ld4086 tv will not turn on. Checked power through switch. Indicating light is not on.


... Apex Digital LD4086 LCD TV

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

Sir I havea problem with my Sanyo Tv model St-21SF1K, when I turn the power it only blinks the led light. when I check the secondary supply the voltage is there and the horizontal out is good.


... Sanyo Flat Panel Televisions

I have my 32LG70 LCD tv since 2009 and it has been perfect, but this morning i was watching it and it just shut off by itself. Everything else is still on, tried switching outlets, reset, but theres no lights or anything to indicate its getting power. Typical day nothing out of the ordinary that would cause this. I called LG the tv is out of warranty and its discontinued. I really dont want to pay an arm and a leg for repair id rather get a new one but im open to suggestions. I don't know anythi


Try to pull out some cable connected on it just leave the power cord and cable connection then try to power it on again. ... LG Flat Panel Televisions

When unit is plugged into a power outlet, the power indicator lights up for about two or three seconds, then a click is heard and the indicator goes off. The indicator immediatly light up again then after a click, goes off. This sequence repeats as long as the unit is plugged into the power outlet. I am using Antenna 1 (Air) input.


The problem is the television is not getting the correct amount of power, so a breaker inside the tv is flipping, thats the click you hear, the problem could be within the TV itself or the outlet it is plugged into, try plugging the TV into another o ... Samsung LNT3242H Television

I Have A .AWA MHDV2411-03 When I Turn On The Mains Power Switch On The Tv - To On . The Red Stanby Led Lights Up As Normal Then I'll Press The Power Button On The Remote The Standby Led Lights Changes From Red To Green As Normal And The Tv Works Fine.When I Switch The Tv Off From The Remote Or The Mains Switch The Tv Switches Off As Normal. Now When I Go To Turn It Back On Again The Green Led Is On All The Time And The Tv Wont Work . When I Leave The Tv Switched Off And Disconected For Sev


... Standard (CRT) Televisions

When you turn of the TV the POWER indicator flashes green for several minutes. The TV never comes on. After the several minutes of the POWER indicator flashing green, it stops, I hear a click and the light goes out. Within a few seconds, the LAMP indicator light starts flashing red continuously. I unplugged the TV and waited one hour to remove the lamp. I could not tell if the lamp was blown. I can see the filament, the glass is clear, but there is a 2 cm or less spot in the right upper c


Sounds like the lamp door is not secured in place. Try removing the lamp door and put in back in until it clicks. ... Panasonic PT-52LCX66 Projection Television

Dynex 47 My Dynex TV stopped powering on. I was told it could be the power supply board cause the indicator light was not on red or turning green when you tried to turn the TV on. I installed a new power supply board, and i'm still not getting any picture or light indicator. What else could the problem be?


This is exactly why I tell people that when your set isn't working, you have to have it properly diagnosed. Chances are you have a defective main board. The power indication is an indication that you have standby power. However, the power indicator i ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1258 seconds