Having problems with your Standard (CRT) Televisions ?

Our Sony picture came on one day & after a few minutes the screen went black, the sound was still there & the stand by light was blinking away. After waiting awhile we can still turn the t.v on, the picture will apear, but after about 3-4 minutes the screen goes black with the sound still going as well as the blinking of the stand by light. It this something that easily be fix, or time to get rid of the tube & on to the flat screen. I really hate to see it go cuz we really - really love this t.



Answers :

Often it is cold solder in c-board. have you tried to re-solder it..in few years of using your t.v it is normally electronics parts heats-up..then it will loose it contact from the base board or the PCB.
if you have a basic electronics knowledge and good soldering skills you can do fix it right away.
if not its better call a qualified t.v repair man.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Our Sony picture came on one day & after a few minutes the screen went black, the sound was still there & the stand by light was blinking away. After waiting awhile we can still turn the t.v on, the picture will apear, but after about 3-4 minutes the screen goes black with the sound still going as well as the blinking of the stand by light. It this something that easily be fix, or time to get rid of the tube & on to the flat screen. I really hate to see it go cuz we really - really love this t.


Often it is cold solder in c-board. have you tried to re-solder it..in few years of using your t.v it is normally electronics parts heats-up..then it will loose it contact from the base board or the PCB.if you have a basic electronics knowledge ... Sony FD Trinitron WEGA KV-32FS120 32" TV

What's your problem?Toshiba 40E220U has sound, no picture. stand by mode maybe? How is this reset? Worked fine, screen went black after 10 minutes. Blinks light on screen, at power up. Can see bac


... Toshiba 40E220U 40" Class LCD TV

MY SONY TV LCD MODEL KF-50WE620 screen went blank. When I turn on the green light it blinks on 40-46 times every second, then turn to red color to Stand mode and blinks for 160 times, then move to power off (red light). This TV has been OK for awhile until TELUS OPTIK HDTV (box) device was connected, shortly after 2 days I heard a loud single sound like a sound of a smoke alarm, just once, "squeeek". Then the TV Screen went blank. The other device from TELUS is still on.


There is no reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective. \015\012\015\012 Might check fuse, R607, Q601, IC601, R612 and VDR601 (should show open).\015\012\015\012 ... Flat Panel Televisions

Samsung model hlr4667wx/xaa. Will not turn on. I can hear it try. It makes the loading up sound, lamp turns on, but screen is still black. At first everthing would power up ok including picture, but a few moments after shut off. But now...just the noise. It also originally went from three blinking lights to two. Its not the lamp. Had already tried that.


Have you had a issue where you heard a high pitched whine or fan like sound?Examine the color wheel- can be done with lamp removed--look in the opening the lamp faces---is wheel intact or missing any pieces?The set will turn lamp on ... Samsung Standard (CRT) Televisions

JVC LT-37E488 no picture, clear sound. Turn it on and the logo blinks on and screen goes black, still clear sound. Disconnected coaxial cable and DVD input, reconnected still no picture only clear sound from both. Cannot access menu - no picture.


You will need to do in-depth troubleshooting, please read below:\012First, look at the screen in darkened room to see if you can see any slight glow from the screen, if it does, then the problem can be the T-CON (not getting the 12vdc) or ... JVC LT42P789 42 in. LCD TV

I have a 2003, KF60WE610 60inch TV. My TV started occasionally losing the picture. The TV will go from normal picture to color patterns yellow/orange, green/blue, black and white. Then I'll have a black screen. The sound is fine. The picture returns without doing anything. The lamp light does NOT blink. The lamp was replaced a year ago. The green power light is steady. What could be the issue?


Your optical block is going bad. Sony has made a recall and is offering to pay around 70% of a new tv. Call this # 1-800-282-2848 Hope this helps. ... Sony Grand WEGA KF60WE610 60" Rear Projection Television

We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are fast enough with turning the system on, you will get a picture for about 2 - 3 seconds, then the screen goes black. The power indicator light will go from blue to blinking red. Thank you for the assist.


It have short in some board have to checked by some professional. ... Hitachi Flat Panel Televisions

I have a 3 yr. old Panasonic model # TH-50PZ80U flat screen T.V. a month ago , after watching T.V for short while , then turning off, then turning back ON screen would be black, no sound or picture, red little light on front bottom blinks 10 times stops for a few seconds then repeats the 10 times blink & so on, until unplugged. The T.V will start to work if left unplugged for 1 hr. or so. Whats the problem ? What part would it need ? Appreciate the help. Kirstin Tidwell in L.B. , CA


The full fault guide explaining this and the solution can be downloaded athttp://www.mauritron2.com/downloads/Panasonic/while for the service manual googlemauritron.com ... Panasonic Flat Panel Televisions

RCA HD61LPW165 No picture, sound fine. Changed the lamp and ballast and still no picture . No blinking lights. Cant get anything on screen


... RCA HDLP50W151 50" Rear Projection HDTV

I have a WD 60735 replaced the bulb as the light was red but now my timer light flashes green when you turn the tv on than goes to solid green you can hear the sound, turn that up and down but the screen is all black and you can not change the inputs. The bulb light did come on red once. I have pushed the reset button but still no picture. Any suggestions


... Mitsubishi WD-62525 62" Rear Projection HDTV

No blinking lights, screen goes black, sound is still on, standby light flashes tv turns off lamp light flashed tv turns on and it happens every 2 minutes what's up


Need new lamp ... Samsung DLP HL-P5663W 56" TV

My problem is: samsung hl-p5063w. I have a new lamp and it works fine. The fans work all right. The color wheel works well. But no picture, only the screen is black. Low light without image. The timer light blinks only when changing channels. The sound is good. Spleaker


I'm not a tech person, but from what I have learned it sounds like your digital board (input) connections. Try diffrent connections to see if you get a picture. \015\012\015\012If you are using a coax cable for your input, try the rca typ ... Samsung HL-P5063W 50" Rear Projection HDTV

I have a 50 inch lg flat screen model 50pq30c-ua. my screen is black but i have sound. i hear clicking as if it wants to turn on. the on light turns blue and begins to blink. i changed the power board with a working one from another tv to see if is the reason it stopped working but it still doesnt work. what do you think is wrong with it?


... Flat Panel Televisions

Have an older Toshiba theaterview TV, when turn on, we have no picture, no sound, just black screen and blinking red light that just continuously blinks.


Theaterview suggests a rear projection--in that case it most likely is in the convergence circuit--unsolder chips (convergence) and see if set turns on.Some of their regular TV sets (picture tube) if the light is just blinking means the same ... Toshiba Standard (CRT) Televisions

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

Soon as the tv is pluged in the red light in the bottom right corner starts blinking RED and NO picture or sound on the screen ,I have unpluged the tv and pluged it back and also to a different receptical it still does not help. About tow months before this problem the picture would take one minute to come on. What seems to be the problem and what cost may be involved?


Ur tv have a power supply board problems,it dead.That the board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.Or the tv shop,will cost u like half of t ... Flat Panel Televisions

I have a 55hds69 2 weeks ago turned on black screen good sound,played around turning it off and on,picture came back. doing it again ,blue light blinks 9 times and stays on steady good sond no picture need hlp


... Hitachi 55HDS69 55 in. Plasma Television

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo light) come on, but no picture or sound. The red standby/timer light has been blinking now for four hours. The instruction book doesn't mention the standby/timer light. I have tried unplugging it and turning it off and on several times, but nothing helps. Still no picture or sound!


Hi,\012\012The\012Standby/Power light of the TV blinks when there is any internal malfunction in\012the TV. The self-diagnostic function of the TV will cause the STANDBY light to\012blink or flash when the television dete ... Sony FD Trinitron WEGA KV-32FS100 32" TV

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo light) come on, but no picture or sound. The red standby/timer light has been blinking now for four hours. The instruction book doesn't mention the standby/timer light. I have tried unplugging it and turning it off and on several times, but nothing helps. Still no picture or sound!


The tv has a high voltage problem, and the probable cause is the flyback transformer has become defective, it's job is to generate the high voltage to energize the picture tube and along with the video circuits produces a pi ... Sony FD Trinitron WEGA KV-36FS120 36" TV

Hi, I have a lg 37lc2d. I turn on the tv, the green power blinks for about 5 seconds. Then all I get is a black screen and no sound. I unpluged the tv from the bluray player and the directv box, and plugged in again, and still the same issue. Why did I unplug everything? To see if i could get the "blue screen" or at least the menu, but no, that did not happen, still black screen, and no sound. Any suggestions? This product has been discontinued, and I have done searches to find that I am not the


Wow I have the same problem! Just happened today same model & everything.This stinks! ... LG 37LC2D Television

My LG 42LM620T Led tv has sound but no picture, what could be wrong.? One day, while watching TV suddenly the picture went off, but there was still sound. Thought I might have pressed some thing remote, tried all options but nothing worked. Switched off, removed the plug but still no change. When switched on I get LG log and picture for a second and then goes off, only sound stays. Tried with different inputs still the same. When flashed light on the screen I could see faint images. Opened up th


... LG 42LM6200 42 in. 3D LCD HD Cinema Smart TV

Vizio 22 power light comes on with no picture no sound have to unplug for light to go out. on ocassion tv does come on with picture and sound . now it just has the power light on with no picture or sound now just a black screen.


... Vizio E220va 22 Inch 1080p 60hz Edge Lit Led Lcd Hdtv

My rca r52wm24 Tv turns on but after about 20 minutes the screen goes black but I still have sound. Sometimes the picture will come back up and work fine after 10-30 minutes but it will go to black screen again. Then sometimes the picture will be fine for around 20 min utes agin flash to black then flash right back to normal. rnWhennthe screen does go to black it slowley fades out takes about 10 seconds to go black


Hi mcpheeters16,\015\012\015\012First to isolate the loose connection from fault, check the cable connectors from the lamp and the ballast board. Pull-out the cables and then re-insert. Also check the ballast board from bad solder joints (crack ... RCA R52WM24 52" HDTV Projection Television

LCD television starts normal, but after 2-3 secs, the screen turns black and remains black, no picture, but sound is still there. All cables have been checked - all possible input channels have also been tested to see if they produced any images onto the screen. When i look in a dark room to the black screen (with a flashlight), you can see (but very hard to see) some grey images (tv pictures) moving over the screen. I've read onto this very interesting website that on some models, one c


... Samsung Flat Panel Televisions

1995 Zenith 52 inch big screen t.v. has sound but no picture, the screen is black buttons on remote and t.v. itself still function but black screen with sound is all


... Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4207 seconds