Having problems with your Flat Panel Televisions ?

I cannot see the entire picture even with Full Pixel setting. Only with the side by side PIP can I see the entire screen. I already reset the tv



Answers :

Hello
\015\012You can use the 'Wide Mode" function of the TV to adjust 4:3 image to fit the entire screen.
\015\012Press the "wide" button on the remote control repeatedly to step through Wide Mode settings WIDE:ZOOM:NORMAL:FULL, and ZOOM.
\015\012
\015\012The "wide mode" settings are also accessable in screen settings too.
\015\012
\015\012To do this, surf through the Menu, come to Screen:TV page. You can select all modes there according to your viewing taste.
\015\012Wide Zoom: Fills the screen with minimum distortion.
\015\012Normal: Select display 4:3 picture in original size when the original source is 4:3.
\015\012Full: Select to enlarge the picture horizontally to fill the screen when the original source is 4:3 (standard definition source). When the original source is 16:9 9high definition source), select this mode to display 16:9 picture in its original size.
\015\012Zoom: Select to enlarge the original picture without distorting the aspect ratio.
\015\012
\015\012NORMAL IS NOT AVAILABLE WHEN YOU ARE WATCHING A 720p, 1080p or 1080i SOURCE.OK

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I cannot see the entire picture even with Full Pixel setting. Only with the side by side PIP can I see the entire screen. I already reset the tv


Hello\015\012You can use the 'Wide Mode" function of the TV to adjust 4:3 image to fit the entire screen.\015\012Press the "wide" button on the remote control repeatedly to step through Wide Mode settings WIDE:ZOOM:NORMAL:FULL, and ZOOM. ... Sony BRAVIA KDL-52S4100 52 in. HDTV LCD

I recently found a Samsung HL-S5087W DLP TV, and was testing it out and realized that the far right side of the screen (about 1/5 of the screen) is darkened; I can still see a picture, but it's just several shades darker than the rest of the screen - is there a simple fix for this? Might it be a setting? I didn't find a remote with the tv, so I'm not even sure I have access to the full range of options on the set. Help please!


This condition is under a class action law suit..If U call Samsung I belive they will check it out for free.. ... Samsung HL-S5087W DLP TV

Signal problems set plays great even up to a week at a time but then start to see lines in screen followed by blue screen with no signal then set turns off by its self..happens with cable and antenna connections..turn set off and resets for a while..is their a board to replace..


... Vizio M260VA 26 in. HD-Ready LCD TV

The left side of my screen is darker than the Problem with the Philips 47PFL7432D/37 TV The left side of my screen is darker than the right and after a minute or so (presumably when the set heats up) the whole screen starts to flicker with multiple horizontal lines shown. There is even a flickering noise coming from the back of the set. I upgraded the firmware but no joy. Please tell me what part I need so I can get this awesome TV running again. I'm working with someone there but may need to up


I just bought a television on Craigslist with this exact problem for a very good price. There are two boards inside on the left and right sides of the screen called the Master and Slave boards. KUBNKM133LB is the exact number on the board in my hand. ... Philips 47PFL7432D/37 TV

I have a 36 inch Panasonic CT-36B30D TV. After i turn it on i can see the screen slowly pushing outward. when it finally stop pushing out it become so wide so that am unable to see what is on either sides of the screen it also has hourglass look, in other words anything that is vertical would have a bend in it. height i okay. i even changed the vertical ic and all the condenser oround that area and it still didn't work. can someone help me please.


The problem may be in the yoke, or pincussion circuits. ... Standard (CRT) Televisions

The left side of my screen is darker than the right and after a minute or so (presumably when the set heats up) the whole screen starts to flicker with multiple horizontal lines shown. There is even a flickering noise coming from the back of the set. I upgraded the firmware but no joy. Please tell me what part I need so I can get this awesome TV running again. Thanks so much!


This is almost always a power supply problem.\015\012\015\012Bad capacitors in the power supply can cause a low quality voltage supply to the other components in the set which can manifest in any number of ways. If you see any burnt or bu ... Philips 47PFL7432D/37 TV

The left side of the screen is very dark when we first turn the TV on. You can see faint images. The right side is fine. The left side clears after the set has been on awhile.


Please include make and model of your unit. This will help in diagnosing your problem. Sounds like you have a Tab Bond issue. That would be where the IC has lost a good ground connection on the heat shield. ... Flat Panel Televisions

Lcd37f1080p unable to reset picture, colour want adjust and under screen you can see the set up menu


... Flat Panel Televisions

I have a compaq w185q lcd monitor for pc.I have got a tv card with it so i can also watch tv with it.But today while watching tv on it i changed its input signal to something like 1600x..the screen suddenly black out with error message input signal out of range change to 1300 x..like this.and to change the setting i clicked menu from remote but menu doesnt appear so i couldnt reset it.it works fine when i switch to pc side but on tv side i get this error message.what to do please help!


... Flat Panel Televisions

We have a vizio hdtv vp42 plasma screen all of a sudden last night entire screen became dull colors are blurred picture is not sharp at all seems like all faded and we are looking through oil. we tried leaving off all day then reseting color settings but nothing has changed??? help


... Vizio P2 42 in. HD-Ready Plasma Television

I have a devant LED and next base player which support hdmi. and i can even play or read the player, though i already reset my LED to factory settings. but still nothings even changes.


... Flat Panel Televisions

The top edge of my mitsubishi wd-62627 is dark. It's not even all the way across about 1.5 inch on the right corner and gone by the left corner. You can still see the image on the entire screen but the dark strip is much darker than the rest of the screen.


... Mitsubishi WD Projection Televisions

Ws-55907 I am trying to connect a WD HD Live to my tv. It will not show the picture across the screen. Instead I see four rows at the top of the television of white lines. If I go into the MENU to adjust the settings I see the small PIP and it has the display I want. Any ideas what is going on?


... Mitsubishi VS-50111 50" Rear Projection Television

WD-60638 I have a Mitsubishi WD-60638 I bought used. The colours and blacks are washed out quite a lot with all of the different settings. Even pure black screens are quite gray looking, almost as if light is escaping out the sides and reflecting off the inside of the tv. Any ideas how I can resolve this? The previous owner had a new lamp put in, she showed me the old lamp and the box for the brand new lamp, it was a phillips brand lamp that was put in.


This is a issue with the DMD board it is not using the colors properly. This part runs around $200 plus you might need to pay for installing.When a color wheel is bad you will have different symptoms. I hope this helps :) ... Projection Televisions

Factory reset I have sound but cannot see the picture. Even the menu screen cannot be seen.


... Sharp LC-19SB25U 19 in. LCD HDTV

The picture size is too big for the tv and I cannot see the entire screen because some is hanging out the sides of the television borders.


Change the view mode back to "normal" instead of using "wide", "wide zoom", "zoom", or something like that. ... Sony FD Trinitron WEGA KV-32FS100 32" TV

TV is a Sony KDL-40S5100, when we turn it on there is a dark shadow over the picture, also left side of screen has shadow effects (residual of previous image). After about 15 min. TV apparantly warms up and picture returns to normal. Have already reset and updated firmware. Thanks for any help


... Sony BRAVIA KDL-40S2010 40 in. LCD Television

Sony Kv27S66-I'm seeing horizontal lines through the screen the last few days. Checked the cable connection, reset the set-up, but no change. Color is still excellent on the TV, anything I can do or check for.?h Appreciated postman56


You must pull the main board out and re solder the vertical IC. This IC is mounted on a large heat sink. I remember that this vertical IC is of the TDA series. It would have seven pins. The pins will have to be re soldered, please do not use too much ... Sony KV-27S66 27" TV

I cannot see the entire picture on my screen. The sides of the picture makes the show seem as though it goes off scrren. Is it my picture tube? If so, how much do they cost?


Is this with everything you view? Make sure you haven't changed the "aspect ratio". Look at the main menu for something like "format" or aspect ratio. Generally in an older TV like that one you should have an auto or native setting. ... RCA D52W20 52" Rear Projection HDTV-Ready Television

I can't get my remote to work. It seems there is a problem with the sensor on the TV. That's not the main problem. To see if I could get it to work I decided to reset to the default factory settings but when I get to the Installation guide and it asks for the country the buttons on the side of the TV cause no response. I've tried unplugging the TV but now every time I turn it on it goes straight to the Installation Guide and that's where I'm stuck at.


I would suggest to bring your TV to the service center That is a software issue only the manufacturer has that data for your TV... ... Flat Panel Televisions

I have a Gateway p46m103 flat screen television that will only turn on after plugging and unplugging the power cord many times. It would eventually turn on each time I tried this. Now, however, the green power light comes on, and I can hear it is on, but the screen is all black. I even tried pressing the Input button on the front of the television, to see if I had accidentally changed it, and even the icon on the screen will not show, to see if I am seeing the cable box, or the dvd player, etc.


... Gateway PLSM46TV 46 in. Television

Can't see sports stats displayed on corner of screen and screen is set to normal


... Vizio VF552XVT 55 in. LCD HDTV

My tv has white vertical lines on the left side of the screen. The tv powers on and there is a picture on the screen that I can see, but on the left side there is no clear picture because there are thick white lines on the left side of the screen. Is this fixable? What could be possible problems?


Hey Carson, Without seeing the set, it is hard to pin down the problem. But I would guess you have a problem with either the t-con board, t-con ribbon connection problem, or a failing LCD panel. Samsungs are known for premature panel failures ... Samsung LN32D450G1D 32 LCD TV

Hello i got a toshiba lcd tv (52hl167) and all of a sudden i saw a black vertical line in the center of my screen and now it got worse the half left side plays perfect however the right side of the screen has alot of colorful lines on it and blinks sometimes cant see and picture on the right side...a local technician told me its the t-con board...i bought it and replaced it and same thing but screen is darker now can u help me please


Hi,I'm afraid it is problem of LCD Panel (screen) and lcd panel will be replaced to solve this issue.I'm sorry for breaking this news but there is no way to fix lcd panel.Thanks. ... Toshiba Flat Panel Televisions

Lock out Just recently my TV has been acting up. It is hooked up to a cable box and a DVD surround sound system. The color of the TV screen when on the cable setting is stressed and when we went into the Menu to change it we noticed the settings had been changed. We clicked reset to set them back and it locked us out. The TV is still on when this happens but the screen is black.We then tried the same thing clicking on other things and the same exact thing happens. On the DVD setting the color i


... LG 50PG30 Plasma HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1914 seconds