Having problems with your Flat Panel Televisions ?

Have a vzio e420va power at supplyboard goes up and down12v goes up then down 24v does same thing from 24v to 15v then back up to 24v also no 5 volt can this be capacitors can't see anybulging



Answers :

Either the board or something connected to the board is drawing a load or creating a no load situation, if the area the voltage goes to opens up the voltage will go up .

If you are a gambler replace the power board and find out.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Have a vzio e420va power at supplyboard goes up and down12v goes up then down 24v does same thing from 24v to 15v then back up to 24v also no 5 volt can this be capacitors can't see anybulging


Either the board or something connected to the board is drawing a load or creating a no load situation, if the area the voltage goes to opens up the voltage will go up .If you are a gambler replace the power board and find out. ... Sony BRAVIA Flat Panel Televisions

My 19in lcd hdtv emerson wont stop turning the volume down by its self.And then i took my batteries out of the remote and it is still doing the same thing. i cant even press buttons on the remote. Also every time I turn it up on the the tv it turns back down and while the show is still going on all you see is the show you are watching and zero at the bottom for volume.


See if the minus volume button on the TV is stuck. With the TV off press the various buttons while keeping your ears close to them. Each will produce a distinct click when you press them, confirm if the volume - key also produces the same sound - if ... Emerson LC320EM8 32 in. LCD TV

My Vizio plasma vp422 made a loud pop and went off. Now it won't come back on. U can turn on and the vizio display turns from orange to white but nothing else. Also u can see the little green light in the back is burning. I have removed the back and don't see any visible damage such as blown capacitors. Also I checked the 4 little white fuses and their is continuity running through them. I don't really know where to start looking next. Would it be one of the boards? Is there any way of checking


You need to get a service manual (good luck) or begin by testing all the marked voltages out of the power supply board at TURN ON.do any come up and instantly go to zero or very low? That is a clue where you would have to follow up. ... Vizio Standard (CRT) Televisions

RCA LCD X2620W TV no picture and possibly no sound. TV has no picture and cannot see if speakers are turned off as I cannot get see menu's. Set has 5v standby and 5v switched. I also have 12v switched. I also see 24v that is present with set on or off?. Any and all help is greatly appreciated.


Hi.The PSU looks OK. Double check that Volts are OK on all outputs.Check if there is DC out from main to inverter. If you have no back light: If there is no DC to inverter, then it is usually main board. If there is DC t ... Flat Panel Televisions

Sizzling,smoke,sparks ...horray. Tv starting making a sizzling sound. Turned it off then back on later to see if i could figure out area of tv the noise was coming from and make sure it wasnt just a speaker getting fuzzy. Bright flash came from top left of back of tv and smoke came out. Ive had the tv for 2 years, im 3 weeks over my warranty (of course right?) Now there is no sound or picture. Easy fix? Worth fixing or get a new one? Oh also took the back off to see if anything was noticably bur


Thats the Inverter board. Your model used several different types which are not interchangeable. You can get the correct Inverter Board for your model by contacting the guys over at ... LG 32LD450 32 In. LCD HDTV

My samsung 46 inch LCD also has the problem of no picture, but clear sound. I read all the posts about capacitor problems, and have gone so far as to take the back off and the power supply cover to look at the capacitors. But they all look flat...I don't see any of the bulging noted in other posts. When I first power up the TV, it looks like it is lighting up, but after maybe 1/2 second of buzzing, the dim light goes off completely. Looking at it from the back with the cover off, you can see the


Samsung has had a lot of capacitor issues with some models, even if the capacitors look good they can still be open and need to be tested with special equipment to get to the root of the problem. They had so man ... Samsung LN-T4665F 46 in. LCD Television

I have Hitachi Ultravision model 46UX25K I was watching in the morning then I shut it down properly by remote control, after few hours I try to turn it on, nothing , no picture just dark screen, I can hear light noise from the back of the TV going on and off within seconds but that's all, when I push the power TV button on my remote control I see the power light goes on and off but no picture. Upon removing the back there is a red LED on a circuit board in the back that also goes on and off when


... Projection Televisions

Cant remove stand from LC46SB54U - dont see 2 prongs going into back of TV...this is what my model looks like. http://lcdtvsale.devhub.com/blog/167586-sharp-lc46sb54u-46-inch-1080p-lcd-hdtv/


Look at page 7 Quick reference sectionfor similar model here:http://files.sharpusa.com/Downlo ... Sharp LC46SB54U 46 in. LCD TV

Hello, i have a samsung 42' plasma tv model #pn42c450b1d. the tv doesn't want to turn on. i plug it in and you hear a clicking noise se a red power light. also when you press the power button on the tv in the back u see a green light come on for a second on one of the circuit bords( the one under the power board) and simutanously you see a red light come on and and off at the same time on the circiut board with the av, hdmi, inputs. i looked and thier doesn't seem to be any bulging capaciters. a


Hi.As you know the TV is in protect mode because an internal fault has been detected. I think that you already tried leaving power cable disconnected for ten minutes. After connecting back restart the TV with no device attache ... Flat Panel Televisions

I have a 63' projection TV. The picture is off. All of the lights are working, but the images are fuzzy, and you see the image tripled. The three images overlap each other in red, green, then blue. It seems like the colors have to put back in sync to form one clear image. Also I can see a bow effect at the top of the screen.


Please do us a favor and rate this solution after reading. Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are ... Philips 55PP9363 55" Rear Projection HDTV-Ready Television

Proscan tv i got the tv on a channel i cant get off of and also the remote dont work. i need the tv back on tv and instead its on hdm12 and cant get off it. i have tryed all the bottons on the side of the tv and no luck so now i have nothing


It sounds that the main system control section circuit have the fault. Contact any technician. ... Proscan Flat Panel Televisions

My dp42849 not coming on the 12 volts to t.com are missing power supply has 24v. 15v. 5volt 12volt inverter on has 3.5 volts


... Sanyo Flat Panel Televisions

I have a LG 60' Plasma TV that has good sound,you can change channels,but on the screen the picture is sort of scrambled,has alot of speckles,and the screen is red. You can see the picture in the back ground at times. Also the lower bottom of picture is jumping up and then back down . The model # is LG 60PK250


I have 50pt350 lg plasma tv.the stand by light blings . ... LG Flat Panel Televisions

INPUT AV3 AT THE BACK IS NOT WORKING WHEN I INSERT THE 3 CABLE (YELLOW,WHITE & RED) OF MY DVD PLAYER AT THE BACK OF MY SANYO 32" LCD TV MODEL 32K40, I CANT SEE AND HEAR THE MOVIE. BUT IF I USED THE AV1 AND AV2-S, ITS WORKING. PLEASE HELP ME WITH THIS,THANK YOU VERY MUCH. BEST REGARDS, BERNARD


Dear user,i think if other ports are working den may be its your Av 1 issue. try other dvd with different cable ... Flat Panel Televisions

G22fledv its a 22" grundig g22fledv tv combo ... disc wont eject from player it says " disc not ready " and is on the no disk screen , cant play it , cant eject it , can any one help? tried holding down the button for extended periods and also powerd of the tv from the wall and back on again..!!??


... Combination Televisions

My daughters got a Bush portable dvd player 533/8887(D) for christmas, they used it for the first time last weekend and it was fine, now the screen is white and picture barely visable, no sound either. Have tried adjusting brightness etc but cant see the screen to see what I'm doing! Any advice before I whip it back to Argos pllleease thnx


... Bush Flat Panel Televisions

Have a LG 60' Plasma TV that has good sound,you can change channels,but on the screen the picture is sort of scrambled,has alot of speckles,and the screen is red. You can see the picture in the back ground at times. Also the lower bottom of picture is jumping up and then back down . The model # is LG 60PK250


This sounds like a y sustain problem most of the time the z sustain should be replaced at the same time and even if not i would advice it because one will be stronger than the other affecting the picture this is a common problem with plasma tvs but y ... LG 60PK550 TV

Subtitles Cant get rid of subtitles, tried everything, always comes back on after changing channels, and also when re tuning channels the do not come back in order i.e. 1,2,3,4 etc I think it needs re programming?? Is this possible?


This feature is often called closed captions and is located BOTH in the menu of the set---set it off or to something other than cc1. And be aware most boxes (cable-satellite etch) have the exact same feature--You have to look in the menus of ... Flat Panel Televisions

Model FA2B32570 The screen is black, i have sound. I have cable plugged into it. I have the back off and i do not see that i have a capacitor problem. What is the next solution? I also have a part looks like a strap it has the writing on it. Tennrich-5 AWM2062480cvw what is it? i think it is unplugged. It happen when i took the back off!


Look for a socket with no plug and :Solutions(1)I see so many people here with nosound /picture issues:ISSUES:1. If sound main fuse/s are good.2. If no power or standby light check fuse, standby power supply, and lo ... Digital Lifestyle Flat Panel Televisions

The freeview box froze and the remote cannot make it work,it will not even turn it off(we checked the batteries and they are ok). We turned it off at the main plug then back on again so see if we could reprogram it but it just comes up with...Please wait whilst the hard disc initialises. Unfortuately that was yesterday and it still hasnt initialised! Can you help we have a lot of programmes recorded and dont want to loose them,also we the freeview box is only over 1 year old(out of guarantee t


The processor is locked up and can't recognize the remote, unplug the cable box and TV from wall for40MIN. and that will fix your problem. ... Flat Panel Televisions

I recently purchased a used Pioneer Pro150FD and was told it worked. Now that I have plugged it in, I get a clicking that the power is on, but there is nothing coming on the screen. I also see a small red light illuminating from within (through the back panel) when the power is switched on. I am using a "osiris" remote that came with it and the control says "PIONR" but the switch doesno't work. I have installed new batteries in the remote. Any thoughts?


... Pioneer PRO-150FD 60 in. HDTV-Ready Plasma TV

I have replaced my lamp in my DLP model WD-62526 Mitsibishi but the screen is dark, so dark that I have to watch it with teh light off. But the funny thing is it isn't as dark as it was when it went though. I hav eremoved the back to search for the ballast but I couldn't find it. I think I would have to remove some more components of the Tv to see where it is. Could it be possible that one of the fuses could of went in the tv which is causing the tv to be dark. Also the HDMI doesn't work either.


... Mitsubishi WD-62526 Projection TV

I have a magnavox model #6p5440 w103. The picture is out of focus and looks like you're seeing doubles. Also the set 1 auxiliary a/v hook ups in the back work but show no color. Can you help me salvage my game room TV?


If picture looks 3d with colors askew it is a convergence issue--set uses two chips, likely stk-392-120's and both would have to be replaced and set adjusted. ... Philips Projection Televisions

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

I have Samsung PN50C6500 but its cant connect the internet via LAN Cable... and i see LED at cable port also not light on.. sorry for my english..


... Samsung PN50C6500 50 in HDTV Plasma TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1815 seconds