Having problems with your Flat Panel Televisions ?

Samsung LE32A457C1D 32" 720p HD LCD Television , switches on, mains lights flash ok sound ok, no picture, screen faintly lights up but nothing visible, no screen menus infra red appears to be working. main power fuse ok. any ideas?



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Samsung LE32A457C1D 32" 720p HD LCD Television , switches on, mains lights flash ok sound ok, no picture, screen faintly lights up but nothing visible, no screen menus infra red appears to be working. main power fuse ok. any ideas?


... Sony BRAVIA Flat Panel Televisions

My TV was working and then all of the sudden the screen went blank and now there is a flashing red light that appears. I tried to turn everything off and back on (the universal solution to everything) but when i power it back on from the TV, it first shows the blue power light and then goes back to red flashing light


Hello\015\012\015\012There is something confusing the system control of your TV and it should me resetted. To reset it, just switch OFF your TV with its front panel power control switch, and after that, unplug the TV from the wall socket ... Philips 37PFL5332D 37 in. LCD Television

The display on my UA55D7000 stopped working properly after about an hour after initally setting it up. Sound still works but screen will only display a sort of multicolourd static snow. No menus or logos or images are visible. Have tried unplugging it all and setting it up elsewhere but no effect. Seems to be a manufacturing defect/fault. Any ideas short of sending it back to the retailer for replacement?


... Samsung Flat Panel Televisions

My pioneer 504HDG-PDP doesn't turn on . The amp is showing a green light but the plasma panel standby light is flickering red . I have tried turning the tv and all components off . When I try to turn the screen on from the side button it switches off. Any ideas ? The tv was working fine since this all of a sudden happened. I've checked all connections as well. Emmanuel


... Pioneer Flat Panel Televisions

Picture on my Hitachi 50vs810 was fuzzy or distorted when I first turn the tv on. After it warmed up for a few mintues, it would work fine with a good picture. Finally I turned on and I get nothing on the screen although it seems as though there is a dim light on. When turning on the red lights come on like the tv is coming on and hey go out quickly and nothing. I replaced the lamp but not the issue. Any ideas


... Hitachi 50VS810 50" Rear Projection HDTV

47LV4400-UA TV power is on (Red standby light on) but will not turn on . Screen remains black. Cable co says problem is the TV. Any ideas?


... Flat Panel Televisions

Get a blinking red light... E01 appears on screen ... Somedays it works almost everyday this happens regularly throughout the day...?


Hi, You didn't mentioned the brand and model number of the tv. Any way from its appearance i think its Pioneer Plasma tv. As you says you are facing this problem every day , There is some problem with the Power supply of the Plasma monitor. Pr ... Flat Panel Televisions

UE46C8790 Remote. Hey there, I noticed that sometimes (for example after switching on and off 3D) on a HDMI connected PS3 the TVs Remote stops working. Well the remote itself still sends the signal, but the TV appears not to get it (no blinking red light on the TV). Any Ideas what might be the cause? it is an easy fix for now. unplug and replug the HDMI cable. But there has to be a more permanent solution out there.


... Flat Panel Televisions

Hallo, please help, i have a sanyo plasma screen pdp-42v1, it has failed to work, when i switch it on, the green light comes on, then the screen blinks some light and then it goes if and starts showing red light. When you try to press any other batton the red and green light come on in squence, what might be the problem


... Flat Panel Televisions

Hallo, please help, i have a sanyo plasma screen pdp-42v1, it has failed to work, when i switch it on, the green light comes on, then the screen blinks some light and then it goes if and starts showing red light. When you try to press any other batton the red and green light come on in squence, what might be the problem


... Flat Panel Televisions

Vc3207 v7 tv/combo dvd player, turn on tv, worked, changed channels, worked, when back to orginal channel, stayed on for a couple of minutes then the screen went black, the little red light came on. tried turning tv on manually , nothing happens. unplugged tv from wall, after 5 miutes repluged , still the same, nothing works except the little red light in front. regards brian


... Combination Televisions

Hi. I have a problem with my 42 inch plasma tv,when tv is turned on green L.E.D appears on bottom right and tv works as normal.After 40 minutes to an hour tv makes click sound and screen goes blank the green L.E.D changes to red on the bottom right there is still power going to the tv hence the red L.E.D.Then when i plug it out and plug it back in red L.E.D appears but screen remains off it stays like this for 3 to 4 hours before tv comes back on and the same is repeated again after 40 minute


Hello,\012\012A common problem for these is bad capacitors in the power supply, Remove the back from your Tv and look at the power supply on the left hand side.\012\012You will see roughly around 9 x capacitors that are bulged / domed shaped on ... Projection Televisions

Hi, My name is Anali and I recently purchased a Westinghouse TV from Target. I had it plugged into the wall and working one evening. The next day when I went to turn it on again the red button would turn on but the screen would not. I unplugged it for the day, moved it to a different wall socket, and it worked. Next day I turned I tried to turn it back on again, to it doing the red light when I hit power, but a black screen.


Hi Anali. That sounds like the powersupply is bad. The tv has a one year manufactuers warranty. Take it back to Target and exchange for another one. Hope this helps. ... Flat Panel Televisions

FLX3211b when plugged in the red power light comes. Then when the TV is turned the red light turns blue and stays on. The Element logo appears for a couple seconds then the screen goes black. There is a red light that is on inside the chasiss. Is it the power supply or main board


The transformer for the backlight is usually what fails on the elements especially if the logo comes up briefly then the screen goes out. I would check the transformers. ... Element Electronics FLX-3211B 32 in. LCD HDTV

I have a pioneer media receiver PDP-RO4G hooked up to a plasma PDP-S12-LR, when I go to turn them on, the media receiver lights both go on. The on light turns green and the standby light turns red. Then the plasma screen standby light turns red as well. Nothing works, i've already tried plugging and unplugging everything. What can I do?


... Flat Panel Televisions

I have a 54 inch flat screen JVC Genessa tv. When I turn it on, the blue light appears, then a red light begins rapidly blinking and the tv won't come on. What's wrong?


... JVC Projection Televisions

We have an RCA model RLED4010A TV obtained new in January. It has been working well, and is compatible with our Bell system. Today it unexpectedly turned off. I unplugged from the source, waited, then plugged back in. The red light on the front bottom right corner came on, but appeared to be only half on. When I used the remote and turned the unit on, the blue light came on, but no picture or sound appeared, then the blue light went out. I repeated the unplugging process a couple of times


... Flat Panel Televisions

Sony KDS-55A2000. bought 1/07. replaced bulb 2/08. gave tv to parents 11/10. worked fine until last week. 1 on screen message, temperature warning (they checked all vents-everything clear and 1' away from wall) then lamp going out message came across. red light blinked 4x and powered off. I ordered new lamp assy came in mail today. parents installed. green light came on then red light blinked 4x-nothing. parents don't have extra income and my financial help is limited. any easy fix solutions????


You will need to check the fans are all switching on when you turn the tv on, it might be one of the fan sensors that has gone bad, the tv wont turn on if it detects that the fans or a single fan is not working. I have not worked on this particular s ... Sony KDS55A2000 55" HDTV

We have an NEC LCD TV model number NLT-32HDB2. It has been working fine, and I turned it off with the remote last night as usual. This morning the red light below the screen was flashing, and the TV wouldn't start. I turned it off at the wall, waited about 30 seconds and turned it back on. Rather than the single red light, an orange light was flashing, and the TV wouldn't turn on.


Hello,If your TV won't turn on, then it means it having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby not ... Flat Panel Televisions

Sony Bravia 46" NX810 shuts down no blinking red lights. The green light stays on a couple seconds longer than the screen is off. Then the green light goes off for a second and back on with the screen. Will happen a few times on fresh start up. Will happen randomly as the tv is on. Current connections are hdmi to Mac mini.. RGB to DVD player. Hdmi to dvi cable and occasionally a VGA cable. Has worked fine in the past with more connections.


... Sony BRAVIA Flat Panel Televisions

I have a Phillips 32PFL5322D/37 tv that is about 2 1/2 years old. Recently the TV stopped working. All I see is 8 red blinking lights when I try to power-up. After reading multiple threads and suggestions I replaced the Power Supply Unit but still no change in the 8 red blinking lights. I have a power aux board coming in the mail and I plan to install. I am out of ideas here. Any other possibilities? It seems everyone is having the same problem with this TV. There must be a reason.


... Philips 37PF7320A 37 in. HD-Ready LCD Television

Samsung LA46A750 - When we turn power on, it automatically goes off and on again. Screen stays black, only the red light power indicator goes on and off. also the red buttons on the right side of the screen, don't seem to work.


... Samsung Flat Panel Televisions

LG 32LC56 On power up with remote Green light flash 6 times then goes solid screen light up but no picture after about about 1minit red and green lines slowly get brighter appear on screen ..


That problem is usually cause of faulty T-con board.. ... LG Flat Panel Televisions

Have Philips 60PL9200D/37, having red light temp problem, fixed fans, fans are working just fine but sometimes after the tv has been on, red temp light comes back on and screen goes black, turn it on and picture comes back


... Philips 60PL9200D Projection Televisions

I have a Panasonic PT50LC13 flat screen LCD. It will turn on for about 10 minutes then shuts off. The power light flashes red and the lamp light slowly flashes red as well. The lamp was replaced about a year ago and just for kicks I did a reset on the lamp with no effect...any ideas? Thanks!


Hi,Replaced lamp was Panasonic original or some low price bulb that installed in old lamp casing/ housing?Let me know above info to diagnose problem.Thanks. ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2360 seconds