Having problems with your Flat Panel Televisions ?

Sound but no picture. No backlight present. No VLED_VCC Voltage from PSU


\015 I have this set that has no backlight.\012Backlight doesn't even flicker. There is no VLED_VCC from the power supply to the Led driver PCB\012Is this a simple case of power supply failure?\012\012Thanks\012Dave\015

Answers :

For sure is the power supply can you replace the module?

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Sound but no picture. No backlight present. No VLED_VCC Voltage from PSU


For sure is the power supply can you replace the module? ... Sony 46 KDL46EX720 3D LCD TV

My lg LCD model 42lc2d-aa has a faint blank screen,no sound,the backlight works you can switch it on with the side control but not off,the remote switches the tv on &off ok.All PSU rails are correct leaving the PSU to the processing board


... LG 42LC2D 42 in. LCD HDTV

Vizio VT470M no picture, no sound, no backlight. Power supply board looks good all voltages appear correct (24V, 5V, and 3.7V) and no "bulged" capacitors . When I unplug unit for two hours, the screen comes on normally backlight comes back up and picture is normal, but changing the channel causes it to go dead again. Bringing up menu with remote is really sluggish and when attempting factory reset, it goes black. Vizio light on the front of the TV comes on and off when pressing power button,


Im having similar problem and with my limited knowledge of lcd tvs and the voltages ALL being good except the pwr on or sw on voltage from the main board to the power supply which tells it to switch everything on Im guessing that something is going w ... Vizio VT470M 47 in. TV

Viewsonic n4060w black screen, no video sound ok. So I've been reading this forum about the problems others have faced with this tv. I decided to purchase pair of inverter boards. After installing them the same problem, no difference. I swap the boards to see if I can find a defective one, nothing. I can see the black backlight on, I have replaced caps on the psw before. Can I suspect the psu once again or am I missing something?


... Flat Panel Televisions

Sony LCD TV / PC Monitor MFM-HT75W manufactured 01/2006 On power up screen displays picture for 2/3 seconds then goes black/blank with power light on and sound transmission OK. Same if connected to PC or DVD player. Is problem backlight (CCFL ?) or invertor or PSU or other ? Other owners experienced same but looking for a solution .Please advise with details of spare parts and availability etc Many thanks


... Sony MFM-HT75W 17 in. HD-Ready LCD Television

I have a insignia ns-lcd37 that has sound but no picture so i assumed a bad t-con board i replaced the t-con board with a new same problem left tv on for hours in a darkened room i saw no backlight i checked all my voltages at the power supply every terminal checked out good what could it be


Its 100% sure that the source of the problem is the backlight inverter board. The fact that there is no backlight confirms this. You will need to replace the backlight inverter board to resolve this problem. If you can get me the part number off the ... Flat Panel Televisions

I have a Samsung LN40A550P3FXZA that is giving me problems. When I first started noticing problems I would turn the TV on and I would hear the power-up sound, the backlight would come on and then the red LED would flash a few times then the backlight would go off and it would repeat (power-up sound---backlight on---LED flash---backlight off). It would do this several times. Sometimes I would be able to get picture if I hit the source button on the side of the TV when the backlight first came


Try Samsung parts. They will almost always have the parts. As for the price. Its either 175$ for the board or a new tv. You have no other option ... Samsung LN40A550 LCD TV

VO37L HDTV10A backlight on, get sound, no picture


TV sets that have been exposed to significant surges can have multiple boards that are damaged. If the backlights are indeed firing, and you get no picture, you may have a problem with the T-Con board, assuming the main board is working properly. Thi ... Vizio VO37LHDTV10A 37 in. LCD TV

What is the difference between the backlight inverter and the voltage inverter?


... Flat Panel Televisions

TURNING THE TV ON WHEN COLD THE PICTURE STROBES AND SOUND IS OFF ON OFF ON IF I ADJUST THE BACKLIGHT AND TURN IT BELOW THE MIDDLE (STD) ADJUSTMENT THE STROBING WILL STOP AND SOUND WILL COME ON IF I TURN UP THE BACKLIGHT TO +6 OR MORE IT WILL START STROBING AGAIN WHEN THE SET IS ON FOR A FEW HOURS I CAN THEN TURN UP THE BACKLIGHT


Check and replace all the electrolytic capacitors at its main power regulator board and check. If it do not help you, replace the power board as card basis. It is a power regulator board problem. ... Flat Panel Televisions

Plasma TV with no sound, no picture, no OSD, PSU powers up.


... LG 42PC1DV 42 in. EDTV-Ready Plasma Television

Sanyou DP26746 LCD TV Has sound, No picture, Has backlights, LCD is active


It sounds that the main digital board to your TV has damaged. But, before make it confirm, a through check should be done. Contact any experienced service technician for help. The work is skilled one, that a user cannot do it with ease. ... Sanyo DP26746 26 in. LCD Television

Insignia NS-32E570A11 goes from standby to blue lite on no sound or picture, marked voltages on power supply look ok


... Insignia Ns-32e570a11 32" Led Lcd Television

Viizio VT420M has scrambled Display, Sound, Backlight and PS outputs are all there


I would suspect the main board as well ... Vizio VT420M LCD TV

Samsung pn58c550g1fxza unit has no picture got sound,ihave my vs,va,ve, and vsc voltages when un it is power up but then they drop,when check disconneting x-main and y-main 1 at a time i get voltages


... Samsung Touch of Color PN58C550G1FXZA 58-inch Class Television 1080p

Loud arcing sound and picture disappears and comes back. Sounds like high voltage section is arcing to ground.


... Panasonic TC-P42U1 42 in. Plasma HDTV

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

My LG 42 px11 plasma Tv made a craking sound and the picture got dark and fasy black and white with sound. by trouble shooting I found out the 6871QZH033A zsus board is blowen, so I replaced it and got all the voltages back agin ,but when truned it on, I got the same not sharp black and white picture and sound. what else may be bad?


... LG RU-42PX11 42 in. EDTV-Ready Plasma Television

55HDS52 no picture no sound. no startup voltage on vsago and vcego connector on connector CN68 power supply and logic board was replaced and still no voltage. what create the 3.15 voltage on pin 2 and 3 for cn68 connector.


... Hitachi Flat Panel Televisions

47LG6000 - aka 47LG60 - starts to power up, backlight on, then screen flickers regularly, no response. Which part to replace?


... LG 47LG60 LCD TV

Samsung HPT5054X/XAA - No picture Sound ok Have all voltages from ps ok vsc & vsvoltages are Ok replace Y-main board still no picture sound ok. Need help.


... Samsung HPT5054 50 in. HD-Ready Plasma Television

Sayno dp26649-01, no picture or sound, all voltages are as labled + -77v on heatsink at pwr in


... Sanyo DP26649 26 in. TV

My RCA Model 27F530T is turning on and off after being on for only a few minutes. When it turns back on, its ususally on a different channel. I read the manual, the only thing thats comes close to sounding like this is a high or low voltage in my apartment. What else could it be, my voltage is fine.


Hello\015\012The fault you reports indicates some voltage problems inside it itsef. Check first, for any loose plug in point on your wall power socket. if it all found ok, there will be some loose soldering contacts inside your TVs power inve ... RCA 27F530T 27" TV

Samsung PS-42Q96HD Hi My Samsung PS-42Q96HD went dead one day no pic and no sound- so I opened up the back and on the psu I replaced 2 bulging capacitors. Now the tv comes on with sound but with no picture. As far as I can tell there is power going through the X and Y boards and the logic board has 2 green led lights on. Any ideas would be greatly appreciated. Thanks in advance


Please check whether the inverter is working and giving voltage to the display board. If not, this might require attention of a qualified service technician. ... Flat Panel Televisions

I have a Samsung PS50Q97HD plasma TV that keeps blowing new boards and I don't know why. It came to me with a faulty YSUS that had damaged the VS supply section in the PSU board. I fixed the PSU and fuse and have good VS voltage now. I replaced the YSUS main. I powerd the TV and the upper YDRIVE (Yscan buffer) board chips when pop. I put this down to it getting damaged unseen when the YSUS went faulty. I replaced the YDRIVE upper with new and then the lower board went faulty too (holes blew in t


... Samsung Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1327 seconds