Having problems with your Flat Panel Televisions ?

The problem I have is that the cable barrel is loose & it has an effect on some but not all channels.....have to keep playing with cable wire to get it to come in good.....had cable company come & look first to see if it was cable but it is not...cable is working fine on other tv's in home.......is this a problem that can be fixed or should I try & exchange it for another one....Sharp Aqous lc-40d68ut......



Answers :

If this input is loose this is something that is not repairable under the warranty so you will want to exchange this television before something untoward happens like the rf connector breaking off because you will be stuck if that happens. Plus when you exchange it you won't want to mention it being loose at all because they might not take it back. You should just say the picture quality is poor and that since you are still within the return period you want to do so and not have a servicer come in for something that is brand new. Have you tried a new cable cord first though?

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Have isolated problem to vhf/uhf connection point. white lines flash in pic. w/a popping sound & if they stay for very long there is a buzzing as in over white or over modulation. problem shows when cable signal is fed direct to tv or thru vcr to tv. other tvs do not exhibit same problem so it's not the cable. have tried other ac outlets & same problem. other inputs; dvd, vcr work fine. cable signal thru vcr tuner fed to ht processor is fine but that is fed via component inputs to tv. sony has b


Hi,Problem seems with main tuner in this tv as other AV inputs working fine so please replace main tuner (TU2) to solve this issue.There are two tuners mounted on A board TU1 and TU2, please replace TU2 and part number would be written on ... Sony KP-53HS30 53" Rear Projection HDTV-Ready Television

The problem I have is that the cable barrel is loose & it has an effect on some but not all channels.....have to keep playing with cable wire to get it to come in good.....had cable company come & look first to see if it was cable but it is not...cable is working fine on other tv's in home.......is this a problem that can be fixed or should I try & exchange it for another one....Sharp Aqous lc-40d68ut......


If this input is loose this is something that is not repairable under the warranty so you will want to exchange this television before something untoward happens like the rf connector breaking off because you will be stuck if that happens. Plus when ... Sharp LC40D68UT 40 in. LCD TV

TV 2 oldies but goodies..............first problem with the Panasonic...it shuts off a couple of minutes after U turn it on, then comes back on by itself. Does this a few times and then continues to play fine. Very anoying. Second problem is audio with the Toshiba. Thru the cable into the turner...snap..crackle..pop. Using the video 1 & 2 inputs, the audio is fine. Im thinking on this one the cable hook up on the tuner broke loose. And finaly the picture has the slightest tilt from left to righ


The slugs have nothing to do with tilt; unless a tilt setting in main menu bonded yoke has no adjustments for this issue. ... Standard (CRT) Televisions

I have coax cable coming from my sky box to the tv upstairs previously this worked fine but the it stopped so I bought a new magic eye and this worked for a while the light on the magic eye is not working now, the picture on the tv is good and the remote works the tv fine can anyone advise what the problem could be


... Flat Panel Televisions

I have a Hitachi 42PD7200 plasma tv. The hdmi port works with the new xbox 360, satellite tv and until recently my Samsung bluray player. When the bluray is connected (via a 4 port HDMI switcher of directly to the TV) it shows the bluray starting up with the Samsung logo and then gives the message invalid frequency. At this point the picture and normally sound are lost. I have connected the bluray to another TV using HDMI, the same cables and it works fine. Has anyone come across this problem


... Hitachi 42PD7200 42 in. HD-Ready Plasma Television

I have an LG 37LE5500 TV. That's plugged into a DSTV Satellite HD PVR Decoder via HDMI. The TV is new. Before I had an old CRT TV and was using the AV (Red/White/Yellow) cables. The LG LED TV has been working fine, except that I've started to notice a "clicking" / "static" sound coming from the speakers now, when using the HDMI connection. When I mute the volume, the sound goes away, so it's definitely not an electrical problem as far as I can see. Anyway, it only starts the "clicking" after


... LG Flat Panel Televisions

32" technika sky red eye picture is perfect remote works perfect but after 10 to 15 mins picture flicks of for a second then on again this happens randomly . Red eye works fine have installed loads of these red eyes an never a problem. Checked end at coax ok changed coax problem still happening. Try old style tv working fine. Noticed on back of tv were red eye goes in 5volts DC never seen this on any previous TVs when fitting. Sky rf outlet 9 volts could this b causing my problem. Can't think of


Log in new account ... Flat Panel Televisions

After being on for a few hours, my TV shuts down. I have called my cable company and they said it is a short in the TV. I have unplugged the TV with the cable line and plugged it back in. It comes back on and is operational for a while, then the problem comes back. I think it's the cable line running from the TV to the box. HELP!!!


You might want to check the sleep timer. Go into the menu and make sure that this is not the problem first. \012\012Let me know if i can help you further.\012\012Kaufman605 ... Samsung T220HD 22 in. LCD TV

The picture will come on when you first turn it on but after 15 minutes or so it fades away. The sound still comes out but no picture. Sometimes it will come back on on its own after a while and then go out again. If you turn it back off for 15 minutes or so it usually comes back on. We already bought a new tv and that one works fine so its not the cable box but I would like to put the old tv in my room.


... Sharp 32L-S400 32" TV

RCA model F25261. When I try to turn it on, it makes a series of really loud clicking noises, like it's turning itself on and off numerous times. Eventually it just shuts off without ever coming on. Checked the cable connection (tried another tv ) and the cable connection is fine. Totally disconnected the cable and just plugged the TV into a electric socket and it does the same thing, so it is not cable related.


... RCA F25261 25" TV

My SV470XVT1A takes about five minutes for the sound to come on. When it comes on it's fine and will stay on with no problem. How do I fix it?


... Vizio SV470XVT 47 in. LCD TV

My sony Bravia 46 now has a blue screen. It started acting up with screen problems but when it warmed up worked fine. Then the blue screen started coming on.I'll wait 25 mins. turn it off/on and


... Sony BRAVIA KDL-46XBR3 46 in. LCD HDTV

Samsung TV Have a Samsung LN32A450 TV that the other night switched from component 1 to channel 3. Channel 3 has snow and the message "weak or no signal" in the middle of screen. Tried resetting cable box which didn't work. Called cable provider and was told it was the TV not cable. Have 2 other TVs in house that are unaffected. Tried unplugging TV for 5 mins which corrects problem but for only 30 mins or so. Last night volume on remote stopped working,all other buttons on remote work,and vo


Based on the information you described you may have a tuner circuit problem or power intermitent faikure fron the power supply module. ... Samsung Flat Panel Televisions

I have a TOSHIBA MODEL 36-A-40 YR 2000 (Tube Type) which works fine 98% of the time. It is connected to a Comcast cable box. It will occasionally go off for no apparent reason and then come back on in about 3-5 minutes. When it returns, it sometimes comes back on perfectly. Most other times it comes back on slowly with a large red strip across the tube and this will slowly but eventually blossom into a good video picture and the audio will return. If you hit the side of the console, tha


Bad solder connections do eventually happen for most sets from heat and expansion on the board--you have really solved this issue--you have a physical issue in the set and now you have to find where.If the picture were to dim out slowly and c ... Toshiba Standard (CRT) Televisions

Church has two tvs and we hook them up to our Macbook pro and use a progam called Mediashout to play lyrics. When we have both tvs connected through a splitterbox they blink green and the image trembles. But when we remove the HDMI cable from the splitter and connect it straight to one TV its fine. How do i get the Two tvs to stop blinking? Help?


HDMI comunicates between the output device and the tv. The two components sync the comunication pulses. By conecting the second tv the pulses are out of sync. Somehow one tv must become Master. Is there a function on tv2 to turn off the sync puls? Ma ... Flat Panel Televisions

I have 2 Flat screen Phillips TVs a 47" and a 20" for my camper. I bought a set of rocket fish wireless speakers for use in my camper. I can not receive audio from the tvs to the speakers. The speaker sender does link up with the remote units but does not receive audio. I tried the wireless on a older TV with a cable converter and they work fine. I tried both tvs using the instructions TV owners manual but still no audio. I used all methods Coaxial,RCA. earphone etc. What am I missing? Are the


The sender plugs into the TVs audio out jack and you may need to select on a on-screen menu for the TV, audio out for the external speaker, in other words, the tv speakers are activated but maybe not the external audio jack for the sender unit. Many ... Philips Flat Panel Televisions

The tv input reads no signal coming from my cable off my Dish. How ever I hooked up another tv to the same cable, works fine.


... ViewSonic VPW425 42 in. Plasma HDTV

I have a new HP Envy m6 laptop. I am trying to hook it up to my Emerson 32 in TV. (model # LC320EM9) via an hdmi cable. The video comes up no problem, but the sound doesn't work at all. It doesn&#


... Emerson LC320EM9 32 in. LCD HDTV

Tv picture blurry and color bad when cable on but when switched to av connected to xbox picture is fine what could be the problem


... Sceptre X32GV-Komodo 32 in. LCD Television

Not sure what happened my tv had sound and then it just went away. I have Dishnetwork cable but other tvs in the house are working fine. I made sure all connections were good. Turned off tv and turned it back, same with cable transmittor.


... Toshiba Flat Panel Televisions

I have an older Mitsubishi TV, model VS-50605, that has been giving me problems. I am not able to consistently get a picture and/or sound through cable. All my other inputs work properly. I can play my Xbox on it and my DVD player works fine. Every now and then I get sound but no picture. On the rare occassion I get a picture through cable, it only lasts about 15 minutes at the most and then it cuts off. I've tried switching between ANT-A and ANT-B but had no luck resolving the issue. Any sugges


U have a pay boxes from those Telicoms,cables or satalites compannies?Yes,tries unplug,replug those boxes back about an hour later for it softwares to updates it softwares,should solved this problems or if not trade it in for a new box. ... Mitsubishi VS-50605 50" Rear Projection Television

Sony trinitron kv36xbr400. no picture no sound. TV was fine this am. Returned to no pic. no sound. Cable guide does come up (visible) when turn on cable box. I have tried to reset by disconnecting from power source.


Hello,\015\012\015\012turn of the TV, remove it from wall and try it in another outlet. Also, connect the TV to a DVD player. If there is still no sound and picture after connecting the TV to a DVD player, then it means the TV has developed a p ... Sony Standard (CRT) Televisions

I have an issue with my LG 32LE5300, when you start the TV there is no problem but at the moment if you chnage the channels it does not change the image, it is like you have only one channel and little more time later the image dissapear and it sounds like old TVs when does not have the TV Antenna. Also when I am playing with my PS3 for moments does not recognize the Video at the HDM1, already change the cable and tested the PS3 in another screen an no problem. It is like the Video card is dam


... LG 32LE5300 Widescreen 32 in. HDTV

I have a Hitachi TV model # 51s715. I lost vision only threw the cable coax connector a while ago. Recently I just lost the same thing, vision only, threw all the A/V connectors at once. I get video fine from the S/Video and HDMI inputs. What can be the problem and should I expect the same problem to happen from the S/Video and HDMI soon?


... Hitachi Projection Televisions

Thought my Toshiba DLP needed bulb replaced, so I thought. New bulb did not fix issue. TV tries to come on, but cycles several times and then finally comes on (not always). I have no idea what the problem could be. No other symptoms. Color is fine.


How long does it take for set to come on and when set is ON How Long wil it Play? ... Toshiba 62HM95 62" DLP HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1259 seconds