Suggested Questions/Answers :
It is recommended you read all this kind of situations
Sharp aquos getting only audio and blue screen for video :(
i have done all troubleshooting steps and now just want to buy the board needed.
all caps are looking ok
tried the reset.
tv just turns itself on when i plug it in
dont have the remote so no clue if menu shows up.
backlight apears to be working and when i hook up xbox 360 i can hear it boot and see the screen get brighter (not much)
thanks for your help
HelloDigital video processing stage on the main board is faulty. The main board mey need repacement ...
Sharp LC32D62U 32 in. LCD HDTV
I have a Mitsubishi WD-73737 and when I turn on the tv the power light flashes very fast for a minute then stays a steady green and the screen is a solid blue. There is no sound as well. I have tried the system reset and it didn't do anything.
I was given this tv, so I don't know how old it is. The tv will occasionally work but that is very random. The only item I have plugged in is an Xbox 360 with the component cables. The menu button does work so I know the screen still works.
Do you have the input turned on that you use the xbox for? Try different inputs as well. If you are getting the menu to come up, the blue screen is telling you that you don't have a signal being run through that particular input. ...
Element Electronics 40' and Xbox 360. When I turn to HDMI2, which is where I have the xbox hooked up to, the screen becomes incredibly zoomed in. It is very annoying because it was working fine ye
Element Electronics 40 in. LED HDTV
Water damage soda dripped onto the controll panle on the right side of the unit. screen works fine but at odd intervels a set up menue apears. the volume controll buttons will on and off switch between setup menue and actually controlling the volume, other buttons have similar problems, if i replace the controll panle will this fix the problem
Emerson LD195EM8 19 in. LCD TV
We have a Samsung flat screen tv hooked up to a V20 Bose system as well as Xbox ,Wii, and DVD player. When the buttons are pushed on the remote to activate the game systems, only the sound works, the game does not come up on the TV. Had been working fine.
Hello,I suspect the video cord (wire). There is every tendency that the video wire is failing. Check the video input on the TV and make sure the cord is firmly positioned and not shaking. Also, check other devices and make sure all connec ...
Flat Panel Televisions
Kdl-32s2010 .... after 1 hour, screen goes blank. I can get to the menu and switch to digital then back to analog and it works fine for another hour. it is hooked up through a regular cable to a sattelite box.
The sattelite box have issues,tries unplug,replug the box back like about an hour later for it to reboot and resetting and upgrading it softwares.This tv problems switching modes to digital and to analog again back and forth should be solved.Still ha ...
Sony BRAVIA KDL-32S2010 32 in. LCD Television
I purchased a Vizio 32' VA320M off of ebay and it arrived today, I hooked it up watched it for a couple hours this morning, played a little xbox on it and went to sleep. I woke up tonight and was watching TV for a hour or two and it started flashing the Vizio logo on my screen, the light on the bottom also started flashing on and off. when it happens you can not turn it off but instead have to unplug it and leave it unplugged for a few minutes. When you plug it back in and turn it on it works as
This tv have the main Tuner signal board have intermitten problems.Return this tv for a refund.Can't return it make a claim with Ebay,Pay PAL or ur credit card if pay by credit cards. ...
Vizio L32 32 in. LCD HDTV
I have Samsug LN-S2651D TV. Recently the screen turned green (no picture). Sound works fine. Cable remote will cycle through channel changes OK. Cable 'TIVO' appears to work OK. TV Menu's seem to work OK. Picture menu: Mode=Custom; Size=19:9; Digital NR=On; DNle Demo=Off; Film Mode=Off; Blue Screen=Off. How can I get the picture back?
Samsung LN-S2651D 26 in. LCD Television
Upon my return from being out of town yesterday, when I turned on the Phillips 50PF9830A flat screen TV (circa 2005, but has worked perfectly all this time), the settings MENU popped onto the screen, and will not go away. The TV is connected to a Comcast cable box and BOSE surround sound system. The only way to move through the MENU screen (with all the settings options) is to use the original Phillips remote. But, there is NO way to get the menu to disappear from the screen. If you navigate
Philips 50PF9830A 50 in. Plasma HDTV
PHILIPS Software /Hardware problem
32pfl5522d blue screen nothing works
Checked the basics holding menu ,
Connecting av source i get nothing
Just blue screen, psu looks ok. I also noticed the blue led flashes when pressing menue or program keys
Only buttons what work are power and volume keys
Any knowlege of this uncommon problem would be ace :D
Philips Flat Panel Televisions
Sled2453w My mother recently bought the Sansui SLED2453W to hook up to her recently bought alien ware computer.
The problem is when she hooks it up the edges of the screen are cut off. I have personally gone through every menu on the computer with no luck to resolving this issue.
Also, there is no screen adjustment in the menu for this TV.
Anyone out there know something I'm missing here?
Flat Panel Televisions
I have programmed my remote to an older JVC television. everything works, but i cannot change the input from the remote. I have a ps3 hooked to the tv. anytime i want to play my ps3 i have to manually press the menu button like a million times until i finally find the input option. is there a way to get the input button working? or at least find input in the menu? the menu button works on the remote.
If the tv has an input button on the side it should let you scroll through all the inputs without having to go through the menu. Hope this helps. ...
Flat Panel Televisions
Proview PA-32JK1A replaced power supply now I have a blue screen with pink vertical lines on the right side. When i hook up a dvd player the sound works and the screen changes like it is playing but u
Proview PA-32JK1A 32 in. LCD Television
I recently moved and had my jvc big screen tv hooked up to direct tv through a hdmi cable i get picture but no sound I had this problem before when i had it hooked up the first time the direct tv guy messed with th tv settings and got it to work but i dont know how he did it and now ive moved and am having the sound issue again how can i get the sound to work on hdmi it works on everyother input channel
JVC HD-52Z575 52" Rear Projection HDTV-Ready Television
Im trying to hook up my first gen 60g ps3 to my sharp lcd monitor, pn-455. im using hdmi for my ps3 - dvi for the monitor. all i get is a black screen. i've tried doing a hard reset and still nothing. if i use the component cables for the monitor it works but the picture is not 1080i. if i hook up the monitor to my laptop with the same hdmi-dvi it works with my laptop. why doesnt it work with the ps3?
Sharp PN-455 45 in. LCD Television
I have a weird problem with my samsung 933sn monitor. It was working great for two years, but now it works only in DynamicContrast mode,every other setting gets me a very dark screen, i have connected It to my laptop, same thing. My graphic card is ok, it is just weird. The screen gets so dark, i use my flashlight to open OSD menu and somehow i get it to DynamicContrast mode,turn it off, then turn it on, it works. When i unplug it from power source and from computer, I get
Samsung SyncMaster 933SN 18.5in. Widescreen LCD Monitor
I bought my Samsung LN40B530 nearly two years ago from Best Buy. Last night while watching cartoons, a vertical white strip about 4 inches wide appeared on the right side of the screen. This morning, the whole screen is white, and that strip is in color, but discolored. The sound works, the menu buttons work, we just can't see anything on the screen. Is there anything we can do?
It cam be the LCD panel, T-CON board, or main board. Very difficult to narrow down to exact baord without manual and proper tools. I would first find out if the switched 12vdc feeding theT-CON board is OK, also try reseating the ribbon cables on the ...
Samsung LN40B530 40 in. LCD HDTV
Have 32" JVC TV AB-32D302 with full black screen and sound. In caption menu you can see words still no pic even if our converter or VCR is hooked up. We have an atenna. PLEASE HELP!!
It sounds that the horizontal output section circuit has the fault. It is really a skilled work. Seek tech support. ...
JVC Standard (CRT) Televisions
We purchased a Vizio LED Razor model #VM230XVT on 1/4/11 and it worked fine till this past weeked. Now when we turn the power on, all we get is the Vizio screen on the TV and will not connect to the channels. I've tried everything to get past the "Vizio screen" including unplugging the power fow awhile and still no luck. I brought in another tv and hooked it up to the same source and everything worked fine on the other tv. I took our new tv to another source and the same thing occurs, just the l
Vizio Flat Panel Televisions
Have an older tv model # AV-27533. A black rectangle shows up on the screen & we can't exit out. We tried the menu. Menu works fine, but still can not close black rectangle from screen.
JVC Flat Panel Televisions
I am trying to hook-up a PS2 to the DWT1304. I have the video (yellow) and audio (white/red) plugged into the front. I have tried to access the game system on channel 2, 3 and 4 with nothing but fuzz/static on the screen. The PS2 has been hooked up to this TV previously and worked. I have tested the PS2 connection on another TV and it works fine. I just don't know what else to try with the DWT1304 TV
Have you tried the AV Channel ...
Durabrand DWT1304 13" TV
When i turn the TV on it looks like the screen comes on. but there is no picture and menu butto and others do not work. Any ideas
LG 42LC2D 42 in. LCD HDTV
I have a Philips 42PFL7422D/37 42-Inch that went out a few weeks ago. After some research i figured it was the power supply board, not it. I knew it had fried some caps somewhere, replaced the master and slave inverter boards and Shazam! it worked perfect. However, when moving the set back into my living room I bummped the screen on the corner of the coffee table and cracked it. (insert explicative here) Anyway, found a used, supposedly working screen on ebay. Bought it, hooked everything up an
Philips 42PFL7422D 42 in. LCD TV
I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still
It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ...
Sharp Aquos LC-46D62U 46 in. LCD HDTV
My WD-60735 doesn't recognize my xbox 360 in HDMI or AV. DVD player works fine in AV, Xbox works fine in HDMI and AV on another tv. Just goes to blue screen on this tv.
Have you set your settings for 720p on your xbox then turn the tv on to the right input then turn the xbox on? i had that issue with a previous tv? does the lights on your xbox just spin around? ...
Mitsubishi WD-60735 Projection Television