Having problems with your Flat Panel Televisions ?

Sharp LC-26SB24U Im getting a white screen. I tried testing main fuse and F404 fuse they are good. I'm getting 12v at the fuse both sides, how do I check power to the T-Con board and is there anything in between I should check.



Answers :

Check all capacitors on the circuit board.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Sharp LC-26SB24U Im getting a white screen. I tried testing main fuse and F404 fuse they are good. I'm getting 12v at the fuse both sides, how do I check power to the T-Con board and is there anything in between I should check.


Check all capacitors on the circuit board. ... Sharp LC26SB24U 26 in. LCD TV/DVD Combo

I have a Sharp LS-26SB24U that has a white screen when turned on. I tested main fuse and F404 fuse both were good. I tested power going from F404 to ground and it was 13v on both sides. I guess my next step is to see if the T-con board is getting power but I'm not sure how. I tried following a white line that said power and along is was a hole and I went from there to ground but got nothing. Any help would be greatly appreciated.


... Sharp LC26SB24U 26 in. LCD TV/DVD Combo

Had a power surge on this tv model klv32s400a, no standby led completly dead. Have opened and checked the power supply as far as I can, supply is present on primary side of transformer but not getting to secondary side I need circiut diagram or perhaps you can tell me what else I could check. PS nothing looks burnt or short cicuit that I can find so far. Regards Anthony


... Sony KLV32S400A 32 in. LCD TV

I have a lg 47 lcd tv. model num. 47LD500. only about a year old when this happened. Was working fine and just shut off by it self. will not do anything at all. no sounds lights nothing. Have checked power cord and all ovious things. Remover back cover and checked fuse and all capacitors look ok. Is there any downloadable test spect. and instructions for the power board. I have a good meeter and pretty good knollage of electronics. any help would be great. Thanks


Check power supply ... LG Flat Panel Televisions

Sanyo DP42746 TV - I get the black screen and no sound (like many others). What I've tried so far, 1)checked all the fuses, 2) Checked PWB input and out (118 vac), unplugged the power cord waited a few minutes and plugged it back in. I get the click when I turned it on and a few seconds later another click. Then, the error led blips 12 times (Time Out error). Any ideas Matt?


... Sanyo DP42746 42 in. Plasma Television

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

My plasma samsung ppm63mf7: no power, all caps OK, ceramic fuses OK, I replace a failed sustainer board. Now power just clicks and blinking power lightrnSo I unpluged T-con board and Main board to check for shorts but problem persist.power board# bn96 03736a* does any body have experiance with this model Tvs


I had a similar problem with mine, i had to change couple of caps but it still would not power on. I ordered one online and it seemed to solve the problem. the power supply board for the TV are a bit expensive but this guys over at had one for under ... Samsung PPM63M7F 63 in. Plasma TV

This tv was used outdoors under a covered patio in south Louisiana, which means high heat and humidity. When not in use it stayed covered with a large trash bag. The problem is I get no response (lights, sound) when powered on with the remote or locally from the set. I've since had it inside for app. 2 weeks and still nothing. I have verified my power sources to be good. I don't know if there is an internal breaker or fuse or anything like that. This tv is a couple years old. Thanks for any he


The internal power supply has failed, possibly due to bad capacitors. Get it repaired. ... Toshiba 26AV500U 26 in. LCD HDTV

I HAVE 43PP8421 PHILIPS HD TV MONITOR, IT WAS FINE BUT NOW IS NOT, I GIVE POWER I RECEIVES, CLICK SOUND COME, THEN A DIM SOUND COME 1 C/S RATE, NO PICTURE, NO OTHER SOUND, I AM WORRY, I CHECKED MAIN POWER FUSES, JUMPERS BUT THEY R OK, PLEASE HELP ME TO GET IT WORKING? THANKS


... Philips 43PP9202 43" Rear Projection Television

RCA L32WD12YX9 MY RCA TV WONT TURN I THINK ITS THE POWER SAPLY BUT I OPEN IT UP AND THERES A WIRE GOING FROM THE BIG MORTHER BORD TOO A LIL MOTHER BORD ON THE LEFT HAND SIDE WERE THE FUSE GO THE FUSE IS OK BUT CANT GET IT TOO TURN ON MAKES A CLICKING NOSE AND THEN THE LIL RED LIGHT GO OUT CAN SUM BODY PLZ HELP ME PLZ


... RCA L37WD12 37 in. LCD HDTV

LG 26LX1D. Has worked for 2 years. Recently moved but the day I left I was still watching the TV and then wrapped it in a thinks blanket for protection and placed it ontop of several winter coats for more protection, screen side up. Nothing placed on top of it. No jars or crazy stops. Whn I plugged it in with the first cord at my new destination, no red LED that usually comes on to show that power is getting there. Tried 2 more cords, 5 outlets and two surge protectors. Finally I get a faint con


It's possiable the powerboard is just not filling those cap's to capacity, this would explain why the green light does not come on, also what can be possiable is a relay in the power board that is not passing the 110v. I am uncertain of cause.. Howev ... Flat Panel Televisions

I have no power to my Toshiba REGZA LCD Model 32AV555D. I have checked plug fuse. Is there anything else i can check.


... Toshiba Flat Panel Televisions

I have a Sylvania 6420FF 20" color TV that will not turn on. I can hear a slight buzzing when it is plugged in if I put my ear to the side of the unit, so it is getting power. When I push the front panel power button - it will not turn on. It is 5 years old and has been in our condo and used very little. Is there a fuse that can be replaced? Other thoughts? Much appreciated.


... Flat Panel Televisions

Logik L32DIGB20 Recently moved the TV, now i get no power or standby light, have checked power to the TV, is there another internal fuse?


... Flat Panel Televisions

This unit is practically brand new, has no dust nor dings nor damage on the unit anywhere, not even a scratch, but I haven't been able to get the unit to power on. Power cord is connected. The switch on the unit sounds like the others when pressed and everything looks and smells good inside and out! There are no cracks on the circuit boards, no broken wiring no broken or missing or out of place connectors. The fuse is also intact and appears good, but I haven't used a meter yet to check for


Hi jesseley,\015\012\015\012Do it has a led light when you plug the unit to the outlet, make sure that the outlet is live, what happen when you pressed the power on switch in the front panel?\015\012\015\012Jdvillanueva ... Flat Panel Televisions

How do I find the power board in a 1997 big screen Sony TV to check the fuse? How do I check the fuse? I live in a house built in the 1890's, and last year there were 2 different tornados ,within 2 weeks of each other, that blew over trees on top of my power line twice in 1 month. My TV hasn't turned on since then. Is it the fuse I need to be checking? Should I replace the power cord, maybe just the cord is fried? It wasn't Although it was manufactured in 1997, it is still a very large, nice t


Here i like all responses to you post.Gazebo, Patio Heaters, ... Sony Standard (CRT) Televisions

Lightning struck close to my apartment and my tv went out despite being plugged in through a surge protector ... the power light will come on, but i get no picture or sound ... i checked 1 of the fuses in the tv and it was fine ... wondering what might be the problem ... the model is jvc av-32wf35


Even if the surge protector saved the power source of the tv from the surge coming thru the mains cable, the tv still got fried because the lightning has generated by induction a big surge in the antenna cable and it has fried at least the tuner and ... JVC AV-32WF35 TV

I have a Sylvania DVD/VCR combo model DVR90VF, and can't get the DVD side to work with my ONN Universal Remote model 39900. One code works for play, stop, and power, but I can't scroll or select anything on the menu, which is the only reason I need the remote.


... Combination Televisions

I HAVE A SANSUI TV I GOT FROM WALMART 2 YEARS AGO. I WAS WATCHING THE OTHER NIGHT AND IT WENT OFF BY ITSELF. I CHECKED ALL THE CORDS AND EVERYTING IS IN RIGHT. I EVEN TRIED TO TURN IT ON BY THE POWER BUTTON ON THE SIDE. THE RED LIGHT IS ON ONLY. COULD IT BE A CIRCUIT BOARD. IF SO WOULD IT BE BETTER TO FIX OR GET A NEW ONE


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... Sansui 19 in. LCD TV

Phillip 50PF9630A/37. I have a red blinking 7 times after a green light. i've allready replaced the 2 bulging cap on the bottom of power supply board and also a cap on the Y board (board on the left) although i sodered it backwards with negative on the wrong side, i imediately resodered it and it sitll doesnt work. i've even isolated and unplug the y board and x board independently to see if it will still give me a blinking red lights and it still does. i've checked every capacitors and fuse on


Hello sir Jose!!!!try to unplug the y sustain only and power ON your TV..and see what happen next..Please reply to this tread for immediate help.. ... Philips Flat Panel Televisions

Heve a phillips 60pp9202 projection. i had convergence issues being that i couldnt move my red. i went in and replaced both ics but i forgot to check the resistors. a week later i finally got in there and found 2 bad resistors. the thing is i didnt take the convergence board out, nor did i unplug anything when i tested the resistors. i put the cover back on until i get the parts. now, for some reason, when i power up the set it will come on like normal, then you hear a click and the screen will


Get a complete kit from www.TvRepairKits.com and start over.They will walk you though the repair. ... Projection Televisions

I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

We have an Element TV FLX2611B. We have owned it three years. The TV is not getting any power. It is as if it is unplugged. I have check the fuse. Any suggestions.


The same thing happened to me when we mounted ours to the wall. I took the fuse out of it's holder and just put it in without the holder and it worked fine until today when we took down the TV to install a shelf above it. Now I can't get it to work. ... Element Flat Panel Televisions

No Power Having a difficult time locating a service manual online. I have read that I should check the fuse(s). Are they easy to get to? Any guidance appreciated. Thank you.


You will have to remove the back cover to get to the fuse. Just follow the power cord/power jack and it will lead you to the fuse. The fuse will be located on the power supply board. If the fuse is blown, you could be dealing with a short circuit in ... Sharp Aquos LC-PD50U 50 in. Plasma Television

I have a samsung lcd tv model LNS-4095DX/XAA. I am getting snowy particles throughout the image. The picture looks great except for the pixel looking particles throughout the screen. I have already replaced the power supply due to some bad capacitors. It was alot worse before the new part. Do you think it is the T-Con or main board that needs replacing? I checked all the connections and tried different cables to see if it got better, it did not.


... Samsung LN-S4095D 40 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1513 seconds