Take the cover off the TV and remove the power board. It is not too hard to do.
\015\012Then initial it with a marker and contact us to have it shipped for repair.
\015\012if we can't fix it within two business days we'll have it shipped back to you at our own cost (note to future readers: this condition may change in future so check with us first!).
\015\012In all other cases return shipping is at your own cost, typically about $10 (USPS medium flat rate box).
\015\012If we fix it the price will be 75% of the lowest you can find a new board for, but no less than $40 and no more than $90. (sigh...that my change over time too)
\015\012If you wait a little we'll post a guide on our blog http://blog.coppelltvrepair.com
on how you can actually test it to see if it is functional. If it passes the test then the problem is in your main board, but it will likely fail it - it;s a known issue.
Testing is not much different than with other power boards, so you can see other articles there on how it's done if you're impatient. Just bear in mind...be extra careful!
\015\012For more questions please contact us directly!
Suggested Questions/Answers :
It is recommended you read all this kind of situations
It seems as if there is no power to the unit even though it is plugged in. I disconnected cord from unit and checked with a meter and read 120 volts so the plug is good. Still no power after replugging into unit.
Take the cover off the TV and remove the power board. It is not too hard to do.\015\012\015\012Then initial it with a marker and contact us to have it shipped for repair.\015\012\015\012if we can't fix it within two business d ...
Sharp LC-37D43U Television
I have a Panasonic TH50PZ77U plasma. (1) recently the unit would power off, without warning. (2) The power light blinked several times two nights ago, but finally came on. (3) Last night, no power light on the front of the unit, and it will not turn on. The unit is plugged into a surge protector and all other components plugged in are operating correctly.
I have read through several forums on similar Panasonic models, and a "power supply" failure seems to be way to common.
Its probably the main filter capacitor thats gone on the power supply, (sorry for mentioning power supply again but it is actually a power supply problem) If you are good at soldering then you can replace yourself, Google Panasonic capacitors and th ...
Panasonic TH-50PZ77U 50" Class Plasma HDTV
No power Unit was fine. One day, the power button was dark, I unplugged it, replugged it and it lit up. Next day same dark button, replugging didn't revive it. When I insert power plug power button flashes amber once then nothing. unit will not power up.
This sounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby powe ...
HP f2304 23 in. HDTV-Ready LCD Television
Viera TC-P50ST30 My TV is DOA. No power, sound, etc. No standby light. Confirmed house fuse, batteries, plus, etc. good. Tried unplugging for awhile. Makes a noise when I plug in to powerstrip or directly to wall. Someone said possible short. Pulled back cover. Checked ribbon between power supply and main board. Meter reads 5 when main not plugged into power. Drops to 2-3 when plugged to main. Is that where the short is? Isolated main by disconnecting all other connections to main. Should I ju
This may help... ...
Panasonic Viera TH-50PZ85U Plasma TV
Sylvania ld320ss8a power up problem.It goes on stand by after 6 or 7 blinks of the green power on light and back to red 5-6 seconds There is no sign of bad capacitors on the inverter CBA.after unplugging power from inverter CBA to the power supply CBA what should the power read under normal conditions coming out of the inverter? I am getting a pulsating reading of 0-117 volts about every 2 seconds.Any advice as to the problem??
Sylvania LC370SL8 37 in. LCD Television
Hi I have a TH50PZ80U that is flashing two red lights when I plug it in. If i press the power button for 5 seconeds it will flash 10 times.
When applying power the AC relays click, after pressing the power button the fans turn on and the optical audio port is red. It will stay 'on' for 3 seconds and then the relays will click on turn off.
No red optical light.
If I test the P25 connector pin 1 voltage it will go to 15 Volts for about a seconed and then 0. This is only achieved by plugg
I'm 100% confident that a D-board replacement will fix this issue. I've worked on 8 of these and a D-board replacement fixed the issue you are having now. I had all the same problems with them but it is all related to the D-board (from previous exper ...
Flat Panel Televisions
TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance
Try to enter auto scan.. ...
Flat Panel Televisions
I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan
There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ...
Pioneer PDP-5071HD 50 in. Plasma HDTV
My toshiba 52hm95 i still without a picture replaced the lamp and the ballast,the color wheel spins(cut the knob with the plastic tip attached from the lamp access door to get it to power up while firing up had my meter hooked up to the lamp plug from the ballast and found to would read 2.5 volt then drop out,what is the problem. thank you
Did you change the bulb or the bulb with housing. 2.5 volt is start up volts. this is to check if the bulb is there or not. check that you have the bulb connected good you can test the bulb with a meter. on rear occations the bulb may not work even ...
Toshiba 52HM95 52" HDTV Projection Television
Had a thunder storm last night. My tv was off, however after the storm I tried to turn it on and nothing! The outlet is good, I have my direct tv box plugged into the same outlet and it has power. I looked but I don't see any sort of circuit reset on this unit. I've only had it for a few months. Anything I can do?
Sounds like the power supply is the problem, it could be as simple as a fuse. ...
JVC LT32A210 LCD TV
This unit is practically brand new, has no dust nor dings nor damage on the unit anywhere, not even a scratch, but I haven't been able to get the unit to power on. Power cord is connected. The switch on the unit sounds like the others when pressed and everything looks and smells good inside and out! There are no cracks on the circuit boards, no broken wiring no broken or missing or out of place connectors. The fuse is also intact and appears good, but I haven't used a meter yet to check for
Hi jesseley,\015\012\015\012Do it has a led light when you plug the unit to the outlet, make sure that the outlet is live, what happen when you pressed the power on switch in the front panel?\015\012\015\012Jdvillanueva ...
Flat Panel Televisions
ILO-32HD - No power, nothing, I checked the power (with a meter) at the plug going to the board (power cord) and got 115v but not even a red standbuy led light comes on. I read on one site that it ne
iLO Flat Panel Televisions
When unit is plugged into a power outlet, the power indicator lights up for about two or three seconds, then a click is heard and the indicator goes off. The indicator immediatly light up again then after a click, goes off. This sequence repeats as long as the unit is plugged into the power outlet. I am using Antenna 1 (Air) input.
The problem is the television is not getting the correct amount of power, so a breaker inside the tv is flipping, thats the click you hear, the problem could be within the TV itself or the outlet it is plugged into, try plugging the TV into another o ...
Samsung LNT3242H Television
I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main
Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ...
Philips Flat Panel Televisions
110 volts, rated TV was plugged into 220 volts power supply. Now when it was plugged into an 110 volts supply its not getting on? What could be the causes? and please suggest solutions.
Philips 22PFL4507/F7 - 22 LED 720p HDTV
I have a sharp aquos LC-13B2Ua beside the power plug on the TV, it says 12V. I'm trying to figure out how to plug my TV on the batteries on my boat. I went trough the manuals and found the following:
For units designed to operate on batteries or another power source, refer to the operating instructions.
C Input: proprietary input from included AC adapter (this plug is not standard, it uses three different 13V inputs)
How do I plug this TV on 12v?
Flat Panel Televisions
Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions
Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ...
Flat Panel Televisions
TV was working fine. Shut it off, all power went, no red light or any other sign of power. Will not turn back on, as if no power source. Unplugged for 1 hour, plugged back in again, nothing, uplugged over night, plugged it in, still nothing. Tried other outlets. Checked the safety fuse, it is good. This TV is not over used (2 adults), TV is 2 years old.
Hello,ok you have done almost everything you can do with a no power on Tv problem, if you have the tech background you could try using a volt meter to see if the TVs power supply is getting the power it needs or if there is a lose wire on the p ...
Element Electronics FLX3711B 37 in. LCD TV
I have an RCA rear projection TV MOD: D52W19B SER: E315C30GD Chassis: ITC222. The flyback arcs when power is applied, several days ago the TV was operational, a loud pop emitted from TV, I unplugged it and let cool then plugged it back, power light came on then an arc from back of unit then turned itself on and off with the same arcing. I took unit apart after viewing your website. Originally I thought one of the bulbs blew, but after viewing the arc from the flyback I’m wondering if that’s the
Yes it is a flyback transfomer is a very sensitive piece of equipment also known as a lot or lopt in you case i would say that the case has cracked on your flyback you may get by however if the damage inside is not significant yet be wrapping the fl ...
RCA D52W20 52" Rear Projection HDTV-Ready Television
Polaroid 3232 with a R0804-0901 power board i have red stand by lite got 24 volts at cn2 when off nothing on cn3 until i turn power on then blue lite comes on then i have 23.5 volts at cn3 also at large plug on left side but no pic
Polaroid FLM-323B Television
With the out of warranty lcd tv Sharp recommended a service in town and they after about 5 minutes determined that I need to replace the inverter boards. They wanted over $500 so I deciced to replace them myself. Installed the boards and after plugging in the power the unit "clicked" then when I pushed the power button it clicked again then aftger about 8 seconds clicked the second time and nothing. The led started flashing steady on-off-on-off. When I first plugged in the led was on solid, now
You still have a power supply problem ...
Sharp LC-C4662U 46 in. TV
While plugging in a D.V.D.s connection the unit stopped responding to the remote control or the manual controls under the front panel. It will not respond to anything except pulling the plug out of the power point. There are two lights on the front of the unit: a green one under what looks like a clock symbol and a red light on the right side of that.Any help would be appreciated!
Hello\015\012You haven't specified anything about the device you uses. Without its brand name and model number, how can I powt a solution to you? Please provide these to me by FixYa please. ...
Flat Panel Televisions
TV powers on and the LAMP light blinks. There is no picture no sound. This problem arose randomly and out of the blue. Some sources as well as other answers here recommend to replace the lamp, but the lamp glows bright. As well, I removed the lamp from the housing and everything appears to be intact. The blink codes for this unit only indicate that the unit is powering on and will be ready in 15 seconds. Other sources I have read also suggest the digital main board is toast. Seems to be quite a
Samsung HLR5667W 56" Rear Projection HDTV
I have Samsung UN46B8000XFXZA LED TV. After power surge it will not come on. Plugging it in causes the blue power up light to come on for one second. The relay on the power supply (BN44-00270A) begins to click. The screen does not come on. All appears dead except for the clicking of the relay on the PS board ever few seconds.rnIf I unplug the connector from the power supply to the Main Unit Board (BN94-02661E) and apply 110v, the screen backlight comes on and there is no relay clicking. (
Yes based on your testing it appears that the power supply is at fault solely and you can opt to attempt a repair or replace it altogether. Unfortunately you will not be certain that the main board does not also need to be replaced until you have rep ...
Samsung Flat Panel Televisions