Having problems with your Flat Panel Televisions ?

Hdmi connection i have PS3 and try to connect with HDMI cable but it still want work. I tried another cable but i keep the problem. No picture no sound. Anny suggestion?



Answers :

Sounds like your TV is not compatible to ps3..or you can try to adjust your resolution

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hdmi connection i have PS3 and try to connect with HDMI cable but it still want work. I tried another cable but i keep the problem. No picture no sound. Anny suggestion?


Sounds like your TV is not compatible to ps3..or you can try to adjust your resolution ... Sharp AQUOS LC-32D44U 32 in. LCD TV

I connected my laptop to my LG 50PQ1000, and then my Blu-ray player didn't work - no mater what I did, the problem was "invalid format". I tried everything, including putting it on another TV - there it worked just perfect, but on LG no. I changed the HDMI cables, I tried all possible resolutions, no way. I updated the player - the problem remained the same. Now in order to watch DVD and BRD I put back the old cables, not HDMI cable.


... LG 42LC2D 42 in. LCD HDTV

I am having problem setting up my hdmi connection with my panasonic viera model TH-L32C10X2. i cant get it connected to my sony ps3. all cable connections are connected. set the tv to either hdmi1 or hdmi2. then tried setting it up on the ps3 console. but when i tried to change the ps3 setting to hdmi setting, the picture goes blank. and after 30 seconds goes back to its original picture. please advice what to do. thanks


I do not own a PS/3, but I will try to help just in case you dont get another expert at this late hour....\015\012\015\012It sounds like you need to save the changes on your PS/3. It is timing out and going back to default because the cha ... Flat Panel Televisions

The problem I have is that the cable barrel is loose & it has an effect on some but not all channels.....have to keep playing with cable wire to get it to come in good.....had cable company come & look first to see if it was cable but it is not...cable is working fine on other tv's in home.......is this a problem that can be fixed or should I try & exchange it for another one....Sharp Aqous lc-40d68ut......


If this input is loose this is something that is not repairable under the warranty so you will want to exchange this television before something untoward happens like the rf connector breaking off because you will be stuck if that happens. Plus when ... Sharp LC40D68UT 40 in. LCD TV

I am having issues with my RCA Scenium D52W135D (playstation 3 connection). Recently, I have been having a very specific problem with this combo. I have it connected using HDMI to a Pioneer receiver (model# VSX-821-K). From this, an HDMI to DVI cable to the TV for HD picture. In the past, no issues at all. Recently, I can play DVDs/bluray discs and get full picture and surround sound. I can play PS2 games and get picture and sound. When I try to play PS3 games, I get sound through the rec


Had the same problem. With mine the other day you probably moved your Playstation 3 too another tv and set your 1080i,720,480 to high deaf on settings in Playstation. You have to change them back to automatic that TV says HDTV but it only plays Plays ... RCA D52W135D 52 in. TV/DVD Combo

Have a toshiba 57h82 projection tv. Have sound but scrambled picture. Will not allow picture to come in clear. Have tried cable line, video line and hdmi cable and still have the same problem. what am i doing wrong?


This is a common problem with certain models. Your hypermodule has failed. You can get a repair kit from www.TvRepairKits.com ... Toshiba 57H82 57" Rear Projection Television

No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg


Have you checked on all inputs including the rear audio and video jacks? ... Sony KDF-50E2000 50" HDTV

I have a Hitachi 42PD7200 plasma tv. The hdmi port works with the new xbox 360, satellite tv and until recently my Samsung bluray player. When the bluray is connected (via a 4 port HDMI switcher of directly to the TV) it shows the bluray starting up with the Samsung logo and then gives the message invalid frequency. At this point the picture and normally sound are lost. I have connected the bluray to another TV using HDMI, the same cables and it works fine. Has anyone come across this problem


... Hitachi 42PD7200 42 in. HD-Ready Plasma Television

We just bought the BD-D8900A, and we have the plasma S/PS42PS2 which we bought 8 years ago. I have tried all different ways to connect the BD but we still get a split picture(two pictures side by side) and no sound. The TV has no HDMI socket so we are using the Y, Pr, Pb cable, what can I do to correct this problem. Thank you Teresa


You are getting two images split in the middle because you have enabled 3D on your Bluray player or are trying to play a 3D disc and your TV is not 3D ready.If the TV is 3D ready both the images with super impose on top of each other giving you a sli ... Samsung Flat Panel Televisions

My LG scarlet goes dark on 1080p60. Its hooked to my cable box, the picture goes black for a sec or two with no sound. No problems on 1080p30 or any resolution. I've tried two different HDMI cables bu


Sounds like a HDMI handshake is being lost. try a brand new cable. ... Flat Panel Televisions

Hi, I have a Sharp Aquos LC-19DV28UT given to me as a gift. I connect the cable from the cable box to the TV, give the remote the proper code, and the TV turns on OK. But then the picture flashes for a brief second, then the picture goes away. The sound is still there. Whenever I try to display any type of menu, it does not display. I tried the TV on 2 different cable connections that work with the current TV, and same problem. I have a feeling there's some setting I need to adjust, but c


... Sharp LC19DV28UT 19 in LCD TVDVD Combo

My Denon receiver, mounted in another room, has HDMI inputs from my DVD player and cable TV. Signal goes from receiver through HDMI into a signal transmitter and then to the TV via Cat 5 data cable and signal receiver. The signal frequently drops out, and especially if any light switches are turned on/off. Is it likely the problem is the result of an electrical wiring problem, or could it be a problem with the Denon receiver itself?


It would seem that the transmitter and/or the receiver may be causing all the fuss...or the cat 5 is having issues...the cat5 cable may have some defect...try using another cat 5(even if it's 6ft long,move receiver closer to tv/dvd and use transmitte ... Flat Panel Televisions

I have a technisat hdfv desk top box. I have been trying to connect in via the hdmi connection. I keep getting the message mode not supported. It works fine via the scart connection. I have tried changing the hdmi cable but still get the same message. I know the hdmi connection on the tv is ok as I can run a blue ray from it. Took it back to the dealer they tried and got same message. They thought it could be a fault with hdmi on the box. The unit was exchanged. Tried again but still get the sam


You might want to see if a firmware upgrade exists for this issue in the Samsung set you have. ... Samsung Flat Panel Televisions

All 3 HDMI ports aren't working showing "no signal" (my main problem), but only port(input/source) on whole tv that works is RCA input/source(A-V,Y-R-W cords)


... Curtis LCD3227A 32-inch LCD TV

Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.


... Sylvania LC320SS8 32 in. LCD Television

I have a Vizio VL320M. Have had long standing problem with TV picture & sound going off for 5 to 10 seconds. Have unplugged TV and held power switch for 30 seconds then plugged it back in. Does not do any good. Lately, I have had a problem with the HDMI input. The picture shrinks top and bottom. I have to go through HDMI inputs back to the original to fix it. Have checked connections. OK. Any suggestions?


... Vizio VL320M 32 in. HDTV LCD TV

LG 37LC2D-EC My Tv has suddenly started to flick between a black screen and picture after it has been on for approx an hour. I have also had a message of "This display does not support HDCP". Does anyone have any idea whats happened? The HDMI cable port is connected to Sky+HD box and I have eliminated fault of HDMI cable as it works perfectly on another TV. I have eliminated Sky+HD box as it works perfectly on another TV. Could an over air/sky/playstation update have messed up the TV?


It sounds like the TV is having sync issues with your Sky+HD box. HDCP is the "High-bandwidth Digital Content Protection" that is used between components. It requires a sync between the devices to ensure that you are not trying to "steal" the video ... LG 37LC2D Television

Hdcp compliant vizio 55" - now recieves message stating set op hdmi port requires hdcp compatible tv input. switch to a compatible input or do not use set top hdmi port. If TV input supports HDCP then the hdmi cable may be at fault. Purchased new HDMI cable tried on all 3 hdmi input ports. No success. How do i correct this problem?


... Vizio Flat Panel Televisions

Issues with LG 26LE5300 26 in HDTV LCD TV Both audio & video flicker off & on when connected to PC via an HDMI cable. No problem when in TV or AV (DVD) modes. PS. worked fine on Day 1, did not use HDMI on Day 2; problem arose morning of Day 3. I've tried the other two HDMI ports to no avail. I've disconnected and reconnected HDMI at PC. I've rebooted both TV and PC.,


I tried this.. and it works perfect for the video.. but there is no audio.Is there any specific setting to be made in TV or my laptop?I have Dell laptop with Win7, because I dont see any option to enable audio.. ... LG 26LE5300 26 in. LCD HDTV

We bought a new LG 32LD460 tv this morning. It switched on fine and we had it running with good picture and all. Then we left it for a while and came back to try and set up the xbox. It switched on with the xbox with the standard av cables but we realised we had an hdmi cable for the xbox. So we unplugged the others and then plugged the hdmi cable into the tv. Lo and behold the tv would not switch back on. We then unplugged the xbox and just kept the power cable of the tv plugged into the tv and


It sounds like a powere supply problem. You will need to take the back off and test the voltages that are printed on the power pcb with a digital multimeter. Need to check the power button light, if it is on then you have the 5VDC standby power and t ... LG 32LD450 32 In. LCD HDTV

Today, while watching tv on the Dish, tv suddenly started powercycling. I unplugged it, waited, and then tried a DVD -- worked fine. Tried Dish again, power cycled again -- on off on off, 1/2 second of picture, no sound, struggles until I unplug her. It's an LG 47LD520 5 months old. Dish network through HDMI, DVD through red / white / yellow. Tried Dish though component cable, still power cycles. Tried all HDMI ports, too, same thing. Brought in my old tv and hooked to Dish thou


If you are using a powerstrip may not be supplying enough power to run the LG HDTV and your HD receiver. If you are using a powerstrip make sure the receiver is plugged directly into the wall. Otherwise this may be a grounding issue please reply if t ... LG 47LD520 47 in. HD-Ready LCD TV

I have a hitachi 42hds52, Two of hdmi outlets stop working . I try different hdmi cables and still nothink, do anyone know what is the problem cables


... Hitachi UltraVision 42HDS52 42 in. HD-Ready Plasma Television

Picture problems My 4 year-old Panasonic VIERA TX-32LZD80 32 in. LCD TV is becoming unwatchable. The main problem is the picture keeps distorting and jumping along with a 'zip' sound or distortion to the sound at the same time. The distortions are horizontal and getting so bad I switch it off and give up trying to watch. I had a similar problem quite a while ago, then it got better and now its back - but much worse. Some channels just produce the odd small distortion,whilst others are unwatc


... Panasonic VIERA TX-32LZD80 32 in. LCD TV TV/HD Combo

Phillips 32 inch lcd model 32pfl3504d/f7 when i hook up my phillips dvp3982 dvd player with a hdmi cable, ports 1 and 3 do nothing. port 2 gives an screen message that says "format not supported" the composite video cables work fine, but the picture quality sucks. i have tried 2 different hdmi cables, so i do not think that is the issue. please, HELP ! ! !


... Philips 32PFL3504D 32 in. LCD TV

UN55D8000 fuzzy I bought a Samsung UN55D8000 about 2 months ago and I am not happy with the picture at all! I am only watching HD chanels and the pictures are not clear enough. I even switched from ATT UVerse to Time Warner, the installer checked all my cables and I bought the most expensive HDMI Monster cable and the picture is still not good, not crisp, fuzzy, edges of people are jagged, etc...I have checked every adjustment possible on the settings...any suggestions?


... Samsung 55 UN55D8000 55 3D LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1722 seconds