Having problems with your Flat Panel Televisions ?

My Sharp Aquos LC-60LE847U lcd TV has some kind of controller issues. At times when we turn the set on using the remote, the indicator light will light but the TV never has sound or picture. It never "turns on". Then when you try to turn the power off, neither the remote nor the manual switch on the set does anything. If you fiddle with the power enough, the indicator light on the bottom bezel of the set will start flashing 3 blinks then one blink and keep repeating that. Unplugging the set



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My Sharp Aquos LC-60LE847U lcd TV has some kind of controller issues. At times when we turn the set on using the remote, the indicator light will light but the TV never has sound or picture. It never "turns on". Then when you try to turn the power off, neither the remote nor the manual switch on the set does anything. If you fiddle with the power enough, the indicator light on the bottom bezel of the set will start flashing 3 blinks then one blink and keep repeating that. Unplugging the set


... Sharp Aquos Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

My loewe Concept L32 shows the red power light on and flickers when I try to turn on via the remote control.......ie the decoder is not starting up. any button I try with the remote the red light flickers but no response from the TV. I have just installed a Topfeild set top box to receive HD and that and the TV was working perfectly. I have tried disconnecting the Set top box and ussing the TV by itself also turned off the power at swich and tried again.all to no avail. Regards, Colin Sh


Http://elektrotanya.com/loewe_chassis_l2650_concept_l26_l32_basic_sm.pdf/download.html\015\012\015\012\015\012\ ... Loewe Concept L32 Platinum 32 in. LCD TV

When the power is turned on, the red indicator light flashes continually. It will not go to solid red. There was a clicking noise from the back of the set, which stopped shortly afterwards. I have pressed the on button on the remote, have turned it off at the wall and left for ten minutes and retried, still same result. It continues to flash red. Is there anything I can do or is it a service job ? Hope you can help. Jeremy


Sounds like your capacitors are bad. Samsung will replace them for free if you call them at 1 800 Samsung. ... Flat Panel Televisions

We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are fast enough with turning the system on, you will get a picture for about 2 - 3 seconds, then the screen goes black. The power indicator light will go from blue to blinking red. Thank you for the assist.


It have short in some board have to checked by some professional. ... Hitachi Flat Panel Televisions

I have an old Toshiba CF27E50 chassis no. TAC 9515 that has had no problems until last week. I went to turn on the power and the red light flashes continuously, but the set does not turn on. I have unpluged the set for an hour and tried to turn it on again, but the same thing happens. I have tried to turn it on using a universal remote and using the power switch on the front of the set. Can this be fixed or not?


This is a protection circuit that prevents the tv from coming on (to stop damage of the components) ....you need to check your voltages off the power supply and make sure they all read well (EX: 2 ... Toshiba 27A44 27" TV

I had sound but no picture on my Element Electronic FLX 3211B LCD Television Set. I replaced two capacitors, and now I have lit screen by turning on the tv on the side panel. Remote does not control the tv and no indicator light are on. But the tv screen is lit. the indicator light and the remote controlling the set may be the same problem. Does anyone know how to fix this ?


You might have bad capacitors still that you cannot see. The only way to be sure is with an ESR meter. Check all the connections on the boards again to be sure that the sensor for the remote did not come off. ... Element Electronics FLX-3211B 32 in. LCD HDTV

I have a 37 inch lcd hd tv made by Curtis model 3717A. I bought the set about 18 months ago. When I attempt to turn the set on either manually or by remote, the on/off light begins flashing but there is no picture. After leaving the set unplugged for several hours I was able to turn the set back on. Since that time I stopped using the tv's on/off, instead just using the cable box. My cat stepped on the power strip yeserday and now the tv will not power back up. Help.


... Flat Panel Televisions

My JVC LT-47GZ78 will not turn on. When I press the remote power or the main power switch on the set button the blue LCD light on the front of the TV lights and then starts to blink, the TV does no come on. Also there is a cliccking noise coming from behind the set. I'm in a country with 220v power supply.


The blinking indicates that the protection system of the power board from the tv has detected a short on one of its outputs and has cut the power to it to prevent further damage - the clicking is made by the main power relay being disengaged, repeate ... JVC Flat Panel Televisions

When you turn of the TV the POWER indicator flashes green for several minutes. The TV never comes on. After the several minutes of the POWER indicator flashing green, it stops, I hear a click and the light goes out. Within a few seconds, the LAMP indicator light starts flashing red continuously. I unplugged the TV and waited one hour to remove the lamp. I could not tell if the lamp was blown. I can see the filament, the glass is clear, but there is a 2 cm or less spot in the right upper c


Sounds like the lamp door is not secured in place. Try removing the lamp door and put in back in until it clicks. ... Panasonic PT-52LCX66 Projection Television

My Hitachi P50x01au plasma TV screen goes blank suddently, and the power indicator green light blinking. TV cannot be turn off by the remote. I switched off the power manually, and turn it on, but the green light still blinking with a black screen.


... Hitachi Flat Panel Televisions

TV won't turn on from remote or manually at the set itself even after cutting power and reseting. Power light on set fluctuates between red and green during attempts to turn on.


... Astar LTV-42ASB 42 in. LCD Television

I have a magnavox 5mf605t/17. All of a sudden it won't turn on. The remote won't turn it on and when I try manually and push the button, the green light turns on then goes to yellow and won't turn on. Like there is not enough power. Could the power plug be bad?


... AOMNI Corporation Magnavox 15MF605T/17 15 in. LCD TV

Purchased a 46' RCA (46LA45RQ) less then a week ago. Tonight, cannot turn the power on by remote or panel. The power indicator lights up red indicating that it has power, however it will not power on. Any suggestions?.


Hi there ,its sounds like the classic case of electronic field interference that can freeze most electronic items nowadays from time to time ,simply unplug the power plug from the wall and plug it back in after 5 minutes ,it should be fine now ,thank ... Flat Panel Televisions

No Power..... Hi, I have a LG rear projection 56DC1D tv and I turned it off with the remote and when i went to turn it back on I got nothing. The red light that shows there is power is not on, which indicates there is no power. I have changed the power coard and still nothing. What do you suggest?


Follow the cord inside there is a fuse directly in line with the cord. ... LG Projection Televisions

My bush lcd32tv009hd wont turn on. red standby light comes on and then green power light when turned on via remote or set. what is causing this?


Good day!That problem is 2 causes,its either power supply or system board.This are some D.I.Y procedure for troubleshooting.\012\012Open the back cover by removing all screws at the back.\ ... Flat Panel Televisions

Power light is red so I guess it's getting power but when I try to turn it on nothing happens. I know a green light indicates it is on but that is not happening and I also have no remote.


The standby 5vdc power is working , that is why the front LED is on but it may be in the safety shutdown mode due to short circuits or bad 12vdc and 24vdc power supply section, or bad main cntrol baord, shorted circuits in the backlights inverter boa ... Norcent Technologies LT4247 42 in. LCD TV

When i turn on my LG 32lg30 on, the power indicator light flashes red 4-5 times, then the monitor turns on to a steady dark blue color. I tried to press buttons on the remote but there is no display.


Now there is a challange.My LG has not shown this behaviour yet. Do you still have the DVD disk that came with the TV.If you do you will get your answer there I presume.Make sure that you are using the correct input.kollagunn ... LG 32LG30 32 in. LCD HDTV

My screen won't come on, however the blue light does come on to show it has power. Sometimes the screen just stays black, other times it seems like it's going to turn on but doesn't, meaning the screen lightens a little but it never fully comes on. This happens intermittently; when I unplug the power source for a small amount of time it sometimes fixes the problem and the screen comes on, however it often takes several tries. Periodically it just comes on right away. Also the remote frequently s


Mi tv no tiene imagen ni aparese el menud esta blanca sonido tiene y se escucha bien. ... Element Electronics FLX-2610 26 in. LCD HDTV

Jvc lcd hd tv LT-32G40 no picture no sound when i turn the power on the green indicator lights turns on but the screen does not respond.even if you the remote control the screen does show any pictures


... Flat Panel Televisions

Tv wont turn on, the power indicator nor the remote receiver light does not light up, the 3rd circle on the front of the tv blinks red!! But it wont come on regardless, tv is only 2 years old, what to do???


The blinking red light means set is in shutdown because of a short inside the tv.Someone to begin would have to open it and check power supply voltages inside the set....that is the first step. ... Flat Panel Televisions

I own a Samsung ln40b530p7nxza tv. I came home Saturday night to and when I tried to turn on the set nothing happened. I made sure the batters weren't dead in the remote by using the power button on the tv... It has power(the red light in the bottom right corner is lit) there is a pausing humming sound that I haven noticed in the past coming from it. Prior to Saturday night I haven't had any problems with the tv at all...


... Flat Panel Televisions

Upon arriving from work today, I noticed that the "red power light indicator" was flashing periodically in intervals. I tried to turn the set "On" but the TV does not want to turn "ON". Could you please suggest any ideas to what could be the cause of this problem. Thank you.


Unplug set and plug back, the blinking power light is a error code, watch it carefully, a sequence of three blinks, pause and three blinks is the most common, it is SHORT PROTECTION. Five blinks and a pause and five blinks is short on 1 ... Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Television

Red power indicator is lit, this will turn to a blue light with the Insignia logo lit when it comes on unfortunately it will not turn on either manually or with the remote.


Hi:Have the power supply checked for puffy capacitors that are swollen on their tops. This is a common problem with LCD televisions. The problem is the five volt standy voltage is to low to turn the set on or operate the Micro. These caps are u ... Insignia NS-L22X-10A 22 in. HD-Ready TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2597 seconds