Check the connection wire for any internal conductor break. Check it with a multimeter.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
Dvd connection we have our direct tv cables hooked up correctly we believe, because we get the signal just fine. When hooking up the A/V cables from the DVD player to the other ports available however, it doesnt pick up the signal after we change the Source on the TV. So basically, everytime we want to watch a dvd, I have to unhook the direct tv a/v cables and hook up the dvd av cables in the same ports. It works just fine then. But we would love to not have to go thru that process everytime.
Check the connection wire for any internal conductor break. Check it with a multimeter. ...
Sceptre X400BV-FHD 40 in. LCD TV
Have isolated problem to vhf/uhf connection point. white lines flash in pic. w/a popping sound & if they stay for very long there is a buzzing as in over white or over modulation. problem shows when cable signal is fed direct to tv or thru vcr to tv. other tvs do not exhibit same problem so it's not the cable. have tried other ac outlets & same problem. other inputs; dvd, vcr work fine. cable signal thru vcr tuner fed to ht processor is fine but that is fed via component inputs to tv. sony has b
Hi,Problem seems with main tuner in this tv as other AV inputs working fine so please replace main tuner (TU2) to solve this issue.There are two tuners mounted on A board TU1 and TU2, please replace TU2 and part number would be written on ...
Sony KP-53HS30 53" Rear Projection HDTV-Ready Television
Suddenly my HMDI connection soes not work?
Tested cables and they are fine.
Component signal from DVD is fine.
Imputs are fine-
Tested other DVD player and it also no signal-
I have two HDMI ports and neither worked.
What is up?
What can I do?
Panasonic TCP42C1 Plasma TV
Phillips 32 inch lcd model 32pfl3504d/f7
when i hook up my phillips dvp3982 dvd player with a hdmi cable, ports 1 and 3 do nothing. port 2 gives an screen message that says "format not supported"
the composite video cables work fine, but the picture quality sucks.
i have tried 2 different hdmi cables, so i do not think that is the issue.
please, HELP ! ! !
Philips 32PFL3504D 32 in. LCD TV
No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg
Have you checked on all inputs including the rear audio and video jacks? ...
Sony KDF-50E2000 50" HDTV
Samsung LCD 32 inch
10 bit and 0 signal. It was working fine the. Switched it on and no signal we have reset and this has just removed all chanels, tried another cable for ariel and even tried the bedroom port ... Nothing seems to be on samsung website with that model number please advise of fix or whether this is just broken
Flat Panel Televisions
I have a Hitachi 42PD7200 plasma tv. The hdmi port works with the new xbox 360, satellite tv and until recently my Samsung bluray player. When the bluray is connected (via a 4 port HDMI switcher of directly to the TV) it shows the bluray starting up with the Samsung logo and then gives the message invalid frequency. At this point the picture and normally sound are lost. I have connected the bluray to another TV using HDMI, the same cables and it works fine.
Has anyone come across this problem
Hitachi 42PD7200 42 in. HD-Ready Plasma Television
This RCA L26HD31 TV has always worked fine in other respects... but when I try to connect my pc's hdmi cable to it for use as a monitor, I just get "unusable signal". When this TV was made, hdmi outputs on laptops was not the norm - it was vga. Can this TV use an hdmi signal from a dell laptop? Yes, I'm using the correct input for the TV and have tried hdmi1 & 2 ports. - Thx
Make sure you have set the laptop's display properties to as low a resolution as possible (also make sure the screen refresh rate is 60 hertz) and turned it off before connecting it to the television. Turn the television on first and set to the corre ...
RCA L26HD31 26 in. LCD HDTV
Today, while watching tv on the Dish, tv suddenly started powercycling. I unplugged it, waited, and then tried a DVD -- worked fine. Tried Dish again, power cycled again -- on off on off, 1/2 second of picture, no sound, struggles until I unplug her.
It's an LG 47LD520 5 months old. Dish network through HDMI, DVD through red / white / yellow.
Tried Dish though component cable, still power cycles. Tried all HDMI ports, too, same thing.
Brought in my old tv and hooked to Dish thou
If you are using a powerstrip may not be supplying enough power to run the LG HDTV and your HD receiver. If you are using a powerstrip make sure the receiver is plugged directly into the wall. Otherwise this may be a grounding issue please reply if t ...
LG 47LD520 47 in. HD-Ready LCD TV
When i plugged my hdmi cable from my cable box to hdmi #4, it doesnt seem to receive any signal. the screen stays black. however, when i use the hdmi #3, it works perfectly fine. could it be that the port itself is defective? and if it is in deed a malfunction, what should i do next?
The fact that port 3 works where as port 4 does not implies that the HDMI port is defective. Samsung offers a 1 year / 12 month standard warranty, and some of higher model TV's have a 3yr / 36 month warr ...
Samsung Flat Panel Televisions
I have a Proscan PLCD5092A and I would like to hook up a Magnavox MRV640 dvd player. I have already tried using RCA cables and connected them to the video input and R/L Ports but no signal comes up on ANY of the alternate channels.
Proscan 50" LCD HDTV PLCD5092A - CURTIS INTERNATIONAL LTD
Only one of the HDMI ports will not work on Westinghouse. I have cable running on composite and Apple on HMDI 2 the HMDI shows no signal. Wanted to use it for my DVD player
Westinghouse TX-42F430S Television
TOSHIBA model SDK1000KU - is not recognized by my VIZIO 47". HDMI cable is connected properly and worked before, but now the TV says NO SIGNAL. VHS works fine, but your Toshiba DVD does not. Help!!!
Toshiba Flat Panel Televisions
My name is Rich. I purchased the vizio m220nv . Just got the tv today. went thru set up and searched for channels no problem. When I press the menu button on the remote nothing happens. when I press the VIA button the apps don't show up. I even thought it might be a weak internet signal and ran an ethernet cable directly to the tv.
Vizio M220NV 22 in. LCD TV
Issues with LG 26LE5300 26 in HDTV LCD TV
Both audio & video flicker off & on when connected to PC via an HDMI cable. No problem when in TV or AV (DVD) modes. PS. worked fine on Day 1, did not use HDMI on Day 2; problem arose morning of Day 3.
I've tried the other two HDMI ports to no avail. I've disconnected and reconnected HDMI at PC. I've rebooted both TV and PC.,
I tried this.. and it works perfect for the video.. but there is no audio.Is there any specific setting to be made in TV or my laptop?I have Dell laptop with Win7, because I dont see any option to enable audio.. ...
LG 26LE5300 26 in. LCD HDTV
Hi, my Phillips was hooked up and working fine directly to the DISH receiver using the HDMI 1. I moved and had to put the DISH receiver in another room and ran a coax cable to where the TV is now using the ANT in spot. I select TV as the source and choose channel 60 and no signal. I hooked up another TV and it works OK. Any ideas?
Hey, I'm Seth. I work as a sub contractor for dish network. I am picking up that your problems are on TV 2? If so, you will need to go into the menu on the TV itself and look for, "channel scan" or "auto memory". Run a scan. If there are no channe ...
Philips 42PFL5332D 42 in. LCD Television
What might be causing my lg 50pk540 to not recognize signals from my cable box or blu-ray player in two of the three hdmi ports?
LG 50PK540 50 in. Plasma TV
TV was working fine. Plays DVD's fine. Can't find HDMI from the cable, hence to TV reception. TV set works fine however on DVD's so it is not the set itself. Can't find the HDMI 1 hook up only the HDMI 2 for the DVD.
Tries tv and cable or satalite boxes unplug,replug it back for like about an hour later.By letting tv resetting itself back to the factory setting and those pay boxes upgrading it softwares.The tv HDMI signal for the tv incomming broadcasting signal ...
Mitsubishi WD-57733 57" HDTV
I have a trutech tv with a built-in dvd the dvd is broken but tv worked fine with cable. i had cable turned-off and now ive tried to hook the tv to my sony dvd player, it does not work and when i try to chane channels it wont move from channel 4 can anyone tell me how i may be able to get the trutech tv to work with my sony dvd player?
TruTech T2000D TV
My Denon receiver, mounted in another room, has HDMI inputs from my DVD player and cable TV. Signal goes from receiver through HDMI into a signal transmitter and then to the TV via Cat 5 data cable and signal receiver. The signal frequently drops out, and especially if any light switches are turned on/off. Is it likely the problem is the result of an electrical wiring problem, or could it be a problem with the Denon receiver itself?
It would seem that the transmitter and/or the receiver may be causing all the fuss...or the cat 5 is having issues...the cat5 cable may have some defect...try using another cat 5(even if it's 6ft long,move receiver closer to tv/dvd and use transmitte ...
Flat Panel Televisions
I have an Insignia NS-LCD42HD-09 42 inch flat screen tv. The HDMI input works, but the component cable says no signal, and I only get cable on two channels. All other channels say no signal. The two channels I get have both picture and sound, and it is not my cable company because I plugged in another tv to the same cable, and everything works fine. I've had this TV for almost three years.
Insignia NS-LCD42HD-09 42 in. HD-Ready LCD TV
Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable
Haier HLH32ATBB 32 in. LCD HDTV
No Signal Cable provider tried to troubleshoot problem of no signal, wthout success. They told me to contact Olevia directly and to ask for help wallking through the steps to get a cable signal. Need help with HD input.
You may have to guidelines given in the operation manual step by step and try resetting, if necessary. Also check whether the system/format transmitted through cable is supported by our TV. ...
Olevia 227-S11 27 in. LCD TV
I have an RCA truflat TV - model # 27F650T - about 7 years old. We are suddenly getting the message "unusable signal". We can hear sound but no picture - We put in a DVD to make sure it wasn't the TV and we were able to watch a DVD. The cable is hooked up correctly and the TV is on the correct channel. This happened once about a month ago and after searching for answers on line, it said to uplug the TV and the cable box for 24 hours to reset the TV, which we did and it did work. However, thi
RCA TruFlat 27F520T 27" TV