Having problems with your Flat Panel Televisions ?

I have black circles on the top of the screen. My son says its pixel problem. TV repair guy is coming today, asking for $130.00 to trouble shoot



Answers :

Your unit has a defective LCD panel. If the unit is not under warranty, the LCD panel itself will cost you about as much as the tv. Best solution is to replace the tv with a new one and always purchase an extended warranty.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have black circles on the top of the screen. My son says its pixel problem. TV repair guy is coming today, asking for $130.00 to trouble shoot


Your unit has a defective LCD panel. If the unit is not under warranty, the LCD panel itself will cost you about as much as the tv. Best solution is to replace the tv with a new one and always purchase an extended warranty. ... Sanyo DP42848 LCD TV

OI HAVE A ZENITH H27H49S TV REPAIR MAN SAYS IT'S A SAMSUNG. TV HAS A POWER PROBLEM THE TV COMES ON NO PICTURE THUMBING SOUND. THE REPAIR GUY SAYS I NEED A YOKE SWIE2-0134 UNABLE TO FIND ONE. THE PREVIOUS REPAIR GUY SAYS HE HAS THE SAME PROBLEM WITH ANOTHER SET AND HAS BEEN LOOKING 8 WEEKS FOR THE PART ANY HELP YOU CAN GIVE ME WOULD BE GREATLY APPRECIATED THE TV HAS A HOOK-UP FOR A COMPUTER AND HAS ON-AIR WHICH ELIMINATES THE GENERIC PRODUCT THANKS


The yoke coil is very critical component of tv. it matches with the picture tube & the circuit. one can not replace with another kind of yoke. these yoke coils are very rare to get. i m so sad to say if it is not available you have to replace the ... Zenith Standard (CRT) Televisions

AQUOS LC-46E77UN I am trying to trouble shoot my tv and thanks to all the people on this site, I have come a long ways. In talking to one person, they had thought that one or both of the inverters were bad, the problem is that the display stays dark, So I replaced both the Master and Slave Inverter boards only to have the same result no display or sound. If I hold my LED flashlight up to the display, I can see the SNOW in the background from no input, so I don't believe that the display is b


Contact the authorized service center for Sharp at your town. Never make it irreparable please. ... Sharp AQUOS LC-46E77UN 46 in. LCD HDTV

55809 convergence Ok, so, I was having convergence problems with my 55809, and would concede to kick the side of it to bump the convergence back into alignment. Now the TV won't turn on period. The green power light comes on, but after a few seconds it goes out. I've been hitting the net hard on info, and it all seems to come down to a convergence problem with a couple of fuses and maybe some chips. Having said that, I looked up parts for repairing my TV and found a kit at tvrepairkits.com tha


... Mitsubishi WS-55809 55" Rear Projection Television

How many more times am I going to have to write my problem description? Each time I compose it, I've got another Pulitzer Prize winner. just dying to be read. Then I get re routed around the world once again only to be asked, once again for my problem description. I'll bet you guys get some pretrty louzy problem descriptiins especially if everyone else has to ennter theirs as often as I had to here. Well here we go again. My Toshiba DVR620KU will no longer dubb from VHS tape to DVD D


... Flat Panel Televisions

I got a SAMSUNG MODEL NUMBER LN32A330J10 today and the picture is mostly white but the sound comes out fine. What does it sound like the problem is?


I would lean towards the t-con board. They are probably in the $40-$50 range. ... Samsung LE32R73BD 32 in. HD-Ready LCD Television

Hi I have a toshiba 32BV702B, I put it on standby and get the solid red light and leave it all day and when I come back and try to turn it on and I get a blank screen and get a flashing red and green light and I can't do anything, so I switch it off at the wall and back on and it comes on fine, is their a problem with the tv! Thanks guys


... Flat Panel Televisions

Hi expert. Ihave a problem thad I dont know what it is with the plasma tv . I have sound but no picture I trouble shoot the powersupply did not find no parts bad .can you tell me or explain me what the problely problem can be ? best regard rudy . ps the model of tv is plasma tv spn 4235 samsung


Hi,I\015\012 am sorry to hear regarding the trouble.Unfortunately, this is a common \015\012problem i came across a couple of times in my shop.This is an internal \015\012fault and needs repair. Though, technician is recommended in ... Flat Panel Televisions

Hi I have a bush s642f1. For last couple of days I've had trouble turning it on from standby. If I've not had the tv on in the last few hours it takes an age to actually come on. When I press the standby button the lights will flash blus indicating its trying to turn on but the they stop until eventually after some time of persistent pressing it finally comes on.. Any idea what could be causing the problem? Many thanks


The power supply is failing, causing the erratic startup ... Standard (CRT) Televisions

The problem of my sharp tv model 21V-FR80M is after powering it ON 3-5 seconds the tv will turn OFF?what could be the posible cause and trouble? PLS KINDLY REPLY AND HELP ME TROUBLE SHOOT!THAKS!!!!


The tv goes to "safe mode" to avoid damage to the main board, your problem should be related to a bad caps on the power supply due the tv turns on and offhope that this help u out ... Sharp Flat Panel Televisions

I have a 46 inch 1080 P Toshiba TV the green light came on the TV didn't come on then the green light didn't come on anymore what could be the problem I had the TV for a month today


If set is new and only a month old have it repaired under warranty. If no light for power at all now I need to know the model number to give suggestions as to what is wrong. ... Toshiba Flat Panel Televisions

Daewoo tv is 7 yrs old. Problem started yesterday. when i switch it on, red light on TV comes on, blank screen. I press the on/off key on the remote, red light on TV turns green, I get picture for 3 seconds, then blank screen and light on TV turns red. Have to start again, same result. What is problem? Worth having repaired?


... Daewoo DTQ-14N2FC 13" TV

TruTech Plv 16190 flat screen connected to converter and antenna. Progressively over past month, TV has taken longer (15-45 minutes) for sound to come on. Yesterday it took 2 hours. Today, no sound at all. What is the problem and how can I fix it. I do not know how to begin to troubleshoot this problem.


The audio processor has some garbage in it do to a small power surge and if you unplug the TV from the wall for 40Min. then it will reset back to normal. ... Flat Panel Televisions

Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.


... Sony FWD50PX2/S 50 in. Plasma Television

I have fpe3205 power comes on but no piture or sound .how do i truble shoot to find problem?


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... Audiovox FPE3205 32 in. HD-Ready LCD Television

Our tv just started this today. TV is on w/ dish. You can hear the sound and the picture is blank. Turn tv off and on picture comes back for a few minutes then off again. The TV is only 2-3 yrs old. Is this a repairable issue??


No pictures on ALL video sources? Lasted 3 years, you are lucky. I just fixed 2 years old SAMSUNG with bad power supply.\012There are four boards that can cause no pictures: T-CON, MAIN, POWER SUPPLY, BACKLIGHTS INVERTER boards.\012You ne ... RCA L32HD31 32 in. LCD HDTV

I HAVE A SAMSUNG PLASMA TV MODEL NO HP P5031. THE TV HAS DEAD PIXELS AND BLACKED OUT SECTIONS ON THE SCREEN WHICH SEEM TO BE RANDOM, NEVER IN ONE SPOT. I HAVE REMOVED THE BACK OF THE TV LOOKING FOR LOOSE CONNECTIONS AND DONT SEEM TO SEE ANY.. ALSO THERE IS ALOT OF DUST ON THE CIRCUIT BOARDS. COULD THAT BE A PROBLEM? DATE OF MANUFACTUER WAS JUNE OF 2004, IT IS AN OLDER MODEL. IS IT EVEN WORTH IT TO REPAIR. THANK YOU


... Samsung HP-P5031 50 in. HDTV-Ready Plasma Television

I have onida xaria lcd 22. After 14 months a new option automatically comes that was factory setting and hotel setting . I pressed factory setting but after this my source button (tv to pc or hdmi ) is not working. One more thing i am unable to change channel, sound type or picture mode. Please help :me i am feeling worst to be onida customer and his customer is also worst. When i talk to repair executive he smiled and no i will not give the process how to enter security. Plz plz help me guys w


... Standard (CRT) Televisions

We have an Electrohome tv - Serial No. 7629ES000060 Model 27E604HD - 27" LCD PROBLEM - The Video menu is constantly coming up on the screen. We have had the tv to a repair shop but the tehnician there is unable to fix it. Can you please help? Thank you. J Baird


Can you tell me what the technician has already tried like replacing some board? The reason I am asking this question is because this can happen either due to faulty microprocessor circuits on the main A/V board or the input board. ... Flat Panel Televisions

I have a Hitachi 50UX19K rear projection tv. It worked last night, then today I went to turn it on, the light came on for about 1 second and then clicked off. After that it will click, but nothing happens. Once I unplug the unit, it try to come on for the 1 second and click off again. I can see no burnt or obvious sign of problem. I have some back ground in electronics. Is there anything I can check with an Ohm meter? I recently installed a remote controlled outlet in line to save ele


Hi.If the remote controlled outlet caused a power surge, this may have damaged the PSU.As a matter of fact, if the TV shuts down completely after clicking instead of going to forced standby (protect mode), then the part damage ... Hitachi Projection Televisions

I presume we had a power surge of some kind. The TV will not power up. All the components (TV, DVD player, VHS/DVD Player) that were linked to cable went out other components (stereo) are still fine even though the were plugged into the same AC power source. Is there any way to trouble shoot the issue without taking the unit in for repair.


You can only find out, if you can remove the back cover of the components not working. The best thing to look for, is to locate the fuses located in the power supplies of each component. If the glass fuses are open, and they are still clear, replacem ... Emerson LC320EM8 32 in. LCD TV

The volume on my tv went out, i had a repair man come out to diagnos the problem. the part number needed is 313912725831 he said it is the smp sound board. it has been 3 months and i finally contacted him and he said that part is no longer available. can you help???? thank you, frank nissen


Hello\015\012As far as picture is OK, there must be sound output from the TV. If not, first check its speaker for open voice coil. You can chek it either with the help of a mutimeter of with a mere torch cell. If the speker is Ok, sound out ... Philips Magnavox 55P9271 55" Rear Projection Television

I have a Sanyo DP50747 (May 2007) it has worked perfectly fine for 4 yrs and then one day while on it shut off and will not power back on. No light - no nothing - as if it is unplugged. Any ideas? I am afraid to call the repair guy because we really can't afford to have them come out and with my back being bad there is no way I can lift this to get it into the vehicle to bring it somewhere.


Tries tv unplug,replug it back like about an hour later.The tv should resetting itself back to the factory setting.Now,the tv should be working again.If tv have the same result,the tv power supply board is the causes and the problems.That the board,w ... Sanyo DP50747 50 in. Plasma TV

I have a Naiko TV CTV N 2897 and I don't have a manual, this wouldn't normally be a problem but I am having trouble getting it to work with a new video player. The instructions with the video ask to refer to the TV manual


Try here \015\012www.abcelectronique.com/forum/attachment.php?attachmentid=34636 or here lamson.dlinkddns.com:8080/.../ALL%20TV%20%20MODEL%20LIST%201-14-2005.xls\015\012 ... Flat Panel Televisions

Problem with mitsubishi wd65737. thought the bulb was bad, bought a new bulb replaced it and now the screen doesnt want to come on. light on the front of the tv turns green, you have sound but no picture then the tv turns off the light on the front is now steady red. resetting the sytem worked yesterday but not today.


Lets try an error code operational checl. Unplug the tv and plug it back in. With the standby LED on press and hold the MENU and DEVICE/INPUT buttons for 5 seconds. The LED will flash a certain number of times pause for a while and blink again. Count ... Mitsubishi WD-73827 73" HDTV DLP TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1512 seconds