Suggested Questions/Answers :
It is recommended you read all this kind of situations
Dark screen husband rolled over on the remote, have directtv all other tvs work well just this one dirrct tv says its the tv not them scsreen is dark can see red green and blue thats all the light it puts out also it seems to be in analog mode and I can't see the screen to try using system setup I tried going to tv mode and changing the channel to line one to or aux/ but can't get it to go there any ifeas
Sansui TVS2750 27"
I have an LG LCD TV...model #52LD550-UB.AUSMLFR. Was working fine last night, turned on this morning to a massive white screen. It still has sound, just on a white screen. I turned on the surround system and have picture on that using the AV1 component, but nothing when using the HDMI1 component. Tried changing the cable, thinking it was the HDMI cable that went bad, with no change. This TV is only one month old. Help!
Flat Panel Televisions
My daughters got a Bush portable dvd player 533/8887(D) for christmas, they used it for the first time last weekend and it was fine, now the screen is white and picture barely visable, no sound either. Have tried adjusting brightness etc but cant see the screen to see what I'm doing! Any advice before I whip it back to Argos pllleease thnx
Bush Flat Panel Televisions
Hi I have Toshiba REGZA 42HL167 42-Inch 1080p LCD HDTV, It stopped working one day and customer care is saying something wrong with system board. when I turn it on yellow light flashed and then screen becomes dark grey and then after few secs the screen becomes black. where I need to take for repair If I cant repair by my own
Try to inspect first for any bulged capacitors inside.. ...
Flat Panel Televisions
I WANT TO USE THE TV AS A MONITOR FOR MY LAPTOP THAT HAS A BUSTED SCREEN. I HAVE IT HOOKED THROUGH A CONVERTER BOX AND THE S VIDEO PLUG TO THE LAPTOP. ITS HOOKED UP BUT I CANT READ THE WRITING IT IS VERY FUZZY. IVE TRIED MAKING THE FONT LARGER BUT STILL I CANT READ IT. HOW CAN I ADJUST THE VERTICAL OR HORIZONTAL SO I CAN SEE THE TASK BAR?
The resolution for S video is low, 480i. This is going to be your limitation. You can try to change the resolution on the laptop, but this will more or less just resize it. Does your TV have VGA? A simple VGA cable would be all you need and the resol ...
Flat Panel Televisions
I have a Panasonic DVD/video recorder DMR-ES35V which will currently not record or play either DVDs or videos. The message on the front screen reads "A1". I don't know what I have pressed to cause this and I certainly don't kinow what to press to return the system to normal mode.
Comment: I am bit of a techo dummy and I have limited eyesight, so if I need to play with buttons on the actual box I will need either very clear instructionhs or pictures showing which buttons to use.
I have tri
Hello Shonz!Is there any other error code that follows A1?Just like a U61 if there is any, just post it back here.So we could figure out the real problem. ...
Panasonic Flat Panel Televisions
Primo i repair a sharp crt tv model 20v-l70m. it work normal for 5 to 10 min. after this duration it turn dark. i can't almost see the picture. the two resistor are ok. i tried also adjust the screen of the flyback then i also adjusted the brightness in the service mode it just improve a little bit but still the brightness is sufficient.
Sharp 25R-S100 25" TV
LCD television starts normal, but after 2-3 secs, the screen turns black and remains black, no picture, but sound is still there.
All cables have been checked - all possible input channels have also been tested to see if they produced any images onto the screen.
When i look in a dark room to the black screen (with a flashlight), you can see (but very hard to see) some grey images (tv pictures) moving over the screen.
I've read onto this very interesting website that on some models, one c
Samsung Flat Panel Televisions
I have a weird problem with my samsung 933sn monitor. It was working great for two years, but now it works only in DynamicContrast mode,every other setting gets me a very dark screen, i have connected It to my laptop, same thing. My graphic card is ok, it is just weird. The screen gets so dark, i use my flashlight to open OSD menu and somehow i get it to DynamicContrast mode,turn it off, then turn it on, it works. When i unplug it from power source and from computer, I get
Samsung SyncMaster 933SN 18.5in. Widescreen LCD Monitor
I have a Hitachi 43FWX20B. I can see the red is not lined up with the blue and green on the far left side of the screen. Only the red and only on the far left side of the screen. Blue and Green are OK.
I tried the Magic Focus, I get a error code 5. I tried manual Focus of the red on the far left of the screen. I can ont move the red.
Do I need to replace the Convergence Chips? Or could this be a bad resistor? If so, witch one.
Please do us a favor and rate this by cliking the thumps up icon located here >>>>>>Projection TV sets have ...
Philips Magnavox 9P6034C 60" Rear Projection Television
My logik tv has for some reason just randamly change the screen colour to yellow picture and some times blue picture. whn i try to change it in the settings it wont let me and the picture will only stay on picture mode music and if i try the option bellow that it only goes up one and some oftions i can not click on. the sound shoots to max when i try to increase the level by one any
Flat Panel Televisions
I just got this TV used and for free and im not sure if i have the original remote but right now the only input that works is the rear input 2, none of the other ones work. In fact i cant even switch to any of the other ones so im not sure if its cause it cant see the other inputs or just that im unable to switch to them. The TV is in great condition and the picture on the Antenna and Input-2 look great so i cant understand why the Input-1, YpbPr and the front input do not work, please help me.
Hi,Click this LINK to view the original remo ...
Mitsubishi WS-55809 55" Rear Projection Television
Have a Proview pa-19jk7. When you turn on the TV, the logo screen appears, then the whole screen goes blank. If I try it in a dark room, I can see the picture with a flashlight, and sound is good. I have taken it apart, and dont see any blown caps. I just dont know if its, the power supply, inverter, backlight. Are there any clues from the logo screen appearing first? Thanks!
In this the the backlighting is done this way - the power source delivers an low DC voltage of around 24 volts to the inverter board , the inverter board ups that to about 500 volts DC and delivers them to the CCLF tubes (basically some thin neon tub ...
Proview PA-19JK7 19 in. LCD Television
I just purchased the TCL42U25 42 inch. My problem is that it seems like the screen is very dark. even if i change the picture mode to Vivid, which is the brightest mood, the screen still looks dark. for instance, i was watching an HD movie last night and it was a dark scene and i was honestly not able to see anything versus my other HD tv.
I was wondering if u got any tips before i return this tv?
Panasonic TCL42U25 42 in HD-Ready LCD TV
Hi there I have a 6 year old Philips TV (LC4.3EAA) that i'm trying to connect to my Apple power book as an external monitor. I can see the laptop on the screen but I can't seem to be able to get it to fill the full screen, can you help?
ps I don't have the remote anymore so am trying to navigate using the tv's own menu!!
Flat Panel Televisions
I have a Insignia DVD player connected to my Emerson HDTV. I used the channel Video1 to play DVD to see movies. It worked well until my son randomly pressed the Insignia DVD remote control. Now whenever we try to see movie using the channel Video1, the screen shows ' not supported format'.
Hello did you try to reset the system of your TV?go to the menu page and look for the reset command..thank you ...
Emerson LC320EM9 32 in. LCD HDTV
I own a 50PL9126D/37 50 in DLP TV I bought used and the picture is dark so I took it apart because I was told it could be dusty or could be the lamp. After I cleaned the inside screen VERY carefully with a microfiber cloth I reassembled the set and now the power button or blue doesn't come on nor does the remote work anymore. Plus the TV is still dark, which I figure must be the lamp. I can turn the TV on by plugging it in and hitting one of the side buttons (different one every time) and then u
Dlp tvs have dark pictures,first thing u must be alway change the tv projection lamp.Specially,if u bought used,because u don't know how long the projection lamp been inside that tv already.After u change the projection lamp,still have problems or he ...
Philips 50PL9126D/37B 50" DLP TV
KDL-32S3000 Problem. We broke remote, so got a new one coming. However, The screen will be normal for 15 seconds or so and then a black bar will appear at top. On the left top of the black bar it will display the input in use "HDMI 1". To the right just under the bar #In the picture# it displays the picture mode "16:9 1080i HD". On the left 3/4 of the way down the screen it displays "Power Saving: Low". After about 15 seconds the screen will refresh and go back to its regular full screen. This k
Its asking you to adjust power on the main power box it sould be under power saver adjust level it to low it should be in your menue and then your main power setings. ...
Sony Flat Panel Televisions
I have replaced my lamp in my DLP model WD-62526 Mitsibishi but the screen is dark, so dark that I have to watch it with teh light off. But the funny thing is it isn't as dark as it was when it went though. I hav eremoved the back to search for the ballast but I couldn't find it. I think I would have to remove some more components of the Tv to see where it is. Could it be possible that one of the fuses could of went in the tv which is causing the tv to be dark. Also the HDMI doesn't work either.
Mitsubishi WD-62526 Projection TV
NS-LCD52HD-09 Source list will come up on screen sometimes. Tv is on dish system and uses dish remote. I have gotten the insignia remote and tried to exit to no use. What is the cause and what is the
Insignia Flat Panel Televisions
I have an older Aqua-Vu Scout...the screen is very dark...hard to see anything...worked super duper at one time ,but does not react to any adjustments with the knobs...help???
I just acquired nec 61mp1 from eBay. I am trying to connect my sky hd box to the nec screen, however I get a blue screen . I have used a hdmi to dvi cable. Is there any way I can connect and watch sky hd on the nec 61 mp1 screen? Can any one help me please? Kind regards raj
NEC PlasmaSync 61MP1 61 in. Television
I just bout 2 flat screen tvs and we tryed turning one on and go's black we tryed unplugging it all day and tryed to see if the menu button but won't do any thing
Take the set back asp, you are covered under warranty. ...
Sanyo Flat Panel Televisions
I've a LG 32LC56 that suddenly becomes black screen while i was watching it. Since then, i was never able to get any picture on screen, even the menu picture.
Sometimes, when I switch it on, i see some colored lines on the upper left screen part, but never a menu.
I've replaced the main board by a new one, the problem is still the same.
May i try to change the screendriver board?
Learn about T-CON board: \012http://www.scribd.com/doc/25276757/E40951307-TCON-Troubleshooting-10-22-09-OPT ...
Flat Panel Televisions
My sony triniton manufactred in 2000 satys in a screen with horizontal lines it does change color but cannot see image i used to shake it a little and would be able to see it but now i cant can u haelp me?
This sounds like a dry joint on the vertical deflector chip. If you are able to use a soldering iron you may be able to check the main PCB and resolder and joints that look like they are cracked. You can also check for any capacitors which look like ...
Sony Standard (CRT) Televisions