Having problems with your Flat Panel Televisions ?

My new Samsung UN65C8000 LED TV has an intermittent pattern of horizontal banding that is present probably 70% of the time and varies from narrow width banding to wider width at times. This is the second of these models I've had, the first just having been replaced by Samsung. I have a 42" Samsung 120Hz LED that has a flawless picture run over the the same AV system with the same inputs



Answers :

You did not say if the first one went back for the same fault. If it went back for a different fault then this set is faulty! If not then unless it it more susceptible to RF interference possibly mains borne than the flawless set (that is possible) and you have some other equipment in the house which is radiating like a power supply or dimmer or whatever, it must be faulty. Turn everything in the house off just to be sure nothing is causing interference. Even then it could be picking up interference from elsewhere. What affects it or does it seem random (position time of day etc.)? The only way to be truly sure is to try it in another location
If it's new why not return it?

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My new Samsung UN65C8000 LED TV has an intermittent pattern of horizontal banding that is present probably 70% of the time and varies from narrow width banding to wider width at times. This is the second of these models I've had, the first just having been replaced by Samsung. I have a 42" Samsung 120Hz LED that has a flawless picture run over the the same AV system with the same inputs


You did not say if the first one went back for the same fault. If it went back for a different fault then this set is faulty! If not then unless it it more susceptible to RF interference possibly mains borne than the flawless set (that is possible) ... Samsung UN65C8000 TV

Doesn't power up. Relay clicks several times, several seconds apart. After third click, power LED blinks three times. The OPC LED blinks once when the power LED blinks the first time. LED blinking pattern repeats every couple of seconds. Opened up TV to check capacitors. All look good. Purchased service manual, but there weren't troubleshooting steps for the power board. Any suggestions as to which board should be replaced first?


First of all you should weight the cost benefit of repairing the set versus purchasing a new one.\015\012\015\012Depending on the size and model of tv, it may be more prudent to simply cut your losses and buy a new tv rather than spend mo ... Sharp Flat Panel Televisions

With the out of warranty lcd tv Sharp recommended a service in town and they after about 5 minutes determined that I need to replace the inverter boards. They wanted over $500 so I deciced to replace them myself. Installed the boards and after plugging in the power the unit "clicked" then when I pushed the power button it clicked again then aftger about 8 seconds clicked the second time and nothing. The led started flashing steady on-off-on-off. When I first plugged in the led was on solid, now


You still have a power supply problem ... Sharp LC-C4662U 46 in. TV

I have a Samsung LN40A550P3FXZA that is giving me problems. When I first started noticing problems I would turn the TV on and I would hear the power-up sound, the backlight would come on and then the red LED would flash a few times then the backlight would go off and it would repeat (power-up sound---backlight on---LED flash---backlight off). It would do this several times. Sometimes I would be able to get picture if I hit the source button on the side of the TV when the backlight first came


Try Samsung parts. They will almost always have the parts. As for the price. Its either 175$ for the board or a new tv. You have no other option ... Samsung LN40A550 LCD TV

White LED scrolling then click and then the top two LED lights turn red with the first one constantly on and the second one flashing.hey guys we were given a rear projector tv by family friends and they said they were watching it one morning and it just stopped working they said it was a bulb issue and it needed replacing but further research tells me its not. i read in another question it could be C871 problem? something to do with the first filter board.


You possibly have a lamp issue but most of the cases like that,,The capacitor is leak or bulged on top..You have to replace it to fix the problem ... LG 62SX4D 62" Television

Mitsubishi wd-73737 turns on for a few moments then the picture flickers and turns off after a new lamp replacement. A red led appears and I get error code #34. I have carefully cleaned dust out of the unit as many people have suggested but I am still having this issue. I am using lamp 915B403001 purchased from an official Mitsubishi reseller. This is the second time I have replaced the lamp, the first replacement worked perfectly.


... Mitsubishi WD-73737 73 in. HD-Ready TV

I have a toshiba regza 32hl67us that was bad.I replaced the tcon board and it fixed it. I replaced the Tcon board and it fixed my issue. A couple of days later I had to reopen the set to reconnect the remote sensor and front panel LED connector that was pulled loose when I opened it originally. Now the issue has returned. I replace the Tcon again but it did not fix it. The issues are : Darkened screen and very slow refresh rate: it also displays vertical lines when you first turn it on. I check


Check the cable you didn't put them back properly ... Toshiba Regza 32LV67U 32 in. LCD HDTV

Wiring diagram this 12 V DC fridge is not working correctly, the problem is this: when you switch to cool all the green led's come on, however it will not cool, also when you switch to warm, the first red led comes on, however only for about 1 minute. I have checked the unit in center between the aluminium fins and i get cool, also warm when i connect to 12 V DC.on the PCB it has the following KNL-316 Kernel also VER.2.0 04/2/24. so if possible i need a wiring diagram. have replaced the 2 Bridg


... Projection Televisions

Hello I am using a Vision Link magic eye on a Samsung LE32R87 which works fine. I am replacing this 32 inch TV with a Samsung UE40D5520 in the same position with the same Vision Link magic eye. However when i connect the magic eye link to the 40 inch TV the red LED light on the magic eye does not come on and i am unable to control the SKY+HD box although am receiving sky TV on the TV. Any ideas please?


... Flat Panel Televisions

HI, I have a samsung 933HD which is being a pain it sometimes turns on and the blue light displays but no responce when pressing the power button but other times it turns on but off after a few seconds and then other times it works fine untill I put it on stand by again I have replaced all the capacitors on it apart from the large 450v 100uf I was going to replace all the resistors but hit a snag - there is one with only 2 bands on either side a black and a yellow and on the board next to it


... Samsung 933HD 19 in. LCD TV

Samsung PS-42Q96HD Hi My Samsung PS-42Q96HD went dead one day no pic and no sound- so I opened up the back and on the psu I replaced 2 bulging capacitors. Now the tv comes on with sound but with no picture. As far as I can tell there is power going through the X and Y boards and the logic board has 2 green led lights on. Any ideas would be greatly appreciated. Thanks in advance


Please check whether the inverter is working and giving voltage to the display board. If not, this might require attention of a qualified service technician. ... Flat Panel Televisions

Ghost / Overlapping Image My TV has developed a ghost image or two overlapping images about 2 inches apart on the screen. It almost appears as if there are two images projected on the screen which are supposed to be aligned together, but are off. It happened just all of sudden. The TV is Samsung LED (series 7) 55 inch, was purchased in December 2009 The Service Center of Samsung informed me that the whole screen need to be replaced costing almost the price of a brand new one which is non sinc


... Projection Televisions

Led glass screen replace - Samsung UN55D8000 55" 3D LED HDTV UN55D8000YFXZA


... Samsung UN55D8000 55" 3D LED HDTV UN55D8000YFXZA

Hello. my samsung HL61650A 61'' DLP tv is about 2.5 years old, and tonight it just shut off. tried to turn back on, got 2 'buzzing' sounds from the back, but it wouldn't turn on. unplugged, undid back cover, put blue switch to 'down', still no luck. now, it won't really even try to power on, and standby & lamp LED lights blink. do you think it is solely the Lamp that needs replaced? help!?


... Samsung HL61A650C Television

Hello, I have a Samsung DLP HLR5667 and it blew a lamp 4 months ago, I replaced the lamp and it worked fine for about 2 months and started shutting off after only running for about 90 seconds. I reset the lamp hours and it worked fine for another 2 months. Now it is shutting off after 90 seconds of running, first the picture then the audio. All three lights then begin to blink. Troubleshooting I have performed is 1. I have cleaned the interior of the television. 2. Jumpered the lamp door switch.


You need to replace your color wheel. This is a very sensitive part and you need to take care when replacing. If you feel comfortable I can walk you through it. If not, I would take it to a authorized service center. ... Samsung Projection Televisions

Replaced the lamp in Samsung HLN437W and picture is brighter but not bright enough even after adjusting brightness. Also lamp LED still blinks


A few questions: was replacement just a bulb or bulb with housing and was it OEM lamp from Samsung?If lamp light is still blinking the issue it has is there---other possible reason would be a ballast that is not bad but putting out low voltag ... Samsung HLN437W 43" Rear Projection HDTV

I have a Samsung HL56A650C1F. We just recently replaced the lamp due to the error code that we received from the LED Lights on the front panel. New lamp lasted about 3 weeks and now we are getting the same code indicating that we have a problem with the lamp. My question is, Did we get a bad lamp or is there some other underlying problems that may be causing the lamps to burn out?


... Projection Televisions

Where do i find replacement screws to attach the base to a Samsung LED TV model UN55C6300SF?


... Samsung UN55C6300 TV

White vertical band on led - Samsung Flat Panel Televisions


Sounds like you have problem in T-con.. ... Samsung Flat Panel Televisions

How to replace fan 3 samsung 61 in led dlp


First thing would be to remove cover and look at fans, dirt or dust on one will lock it up.Google the model number with Parts and a good idea if one or more are identical is replace or even swap them.The lamp fan and main fan should b ... Samsung HL61A750A 61" HDTV

I have a Samsung 46 LED 3D 200hz tv. Normally the tv is fine but lately the tv, after a hour or more of viwing, tends to lose signal. Often it starts off with the sound going and then I will lose the picture. I don't think it's loose cables. I often turn the tv off for a few minutes and then turn it back on again. The sounf and picture are fine again, but then I lose sound and picture a few seconds or minutes later. At first I thought it was my Foxtel playing up but when I do have picture and


... Samsung Flat Panel Televisions

My samsung LN37C550 led TV has no pwer & a burt smell. I took off the back & looked at the power supply board. The fuse is blown and the is a smoll component with the number CR 814 next to it on the board. Any idea what that is and can I replace it myself?


If you have the components part number, you can certainly order a new component. However, I suggest you approach this repair with caution, as some of the parts you may have to replace can be very small. I would only attempt replacing the part if you ... Samsung Flat Panel Televisions

I have a samsung model # pn50b450b1dx2a that quit working. took it it to have it looked at and was told the main board went out. I just replaced that, now sound works but no picture at all. except when it is first


... Samsung Flat Panel Televisions

Like yourself i have replaced 4 x 1000uF 10v caps (high temp) as the were distorted at the top. However my Samsung LE40R8 is exhibiting the same problem......Clicking noise and red LED going on and off. I was convinced this would cure the fault, having a basic knowledge of switch mode power supplies.


Which voltage did you use for the caps? I hope not the same. ... Flat Panel Televisions

Hello, i've just brought a samsung 46" series 8 led. and my aerial connection wont fit into the connection on the back. Is there a special slimline connection i have to buy its got a note on the back of t.v stating 14mm max connection width.. if you could let me know what ariel connection to buy that would be great thanks...


Yes the Tv should have come with the tv. Sometimes its stuck inside the packaging. If you cant find it you have to order it from Samsung. I would go to where you purchased tv and see if they have any spares. Hope That Helps. ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0969 seconds