Having problems with your Standard (CRT) Televisions ?

TV remote on my model TXL2791F won't turn TV on. When I press the power button on the TV itself the little timer light blinks and the TV makes a ticking sound for a few seconds. If I press the power button again the blinking light and ticking sound happen again for a few seconds. If I repeat pushing the power button on the TV again the blinking and ticking will then go on all day long unless I unplug the TV for 15 minutes or more. All during this time the screen is dark. Just before this ha



Answers :

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

TV remote on my model TXL2791F won't turn TV on. When I press the power button on the TV itself the little timer light blinks and the TV makes a ticking sound for a few seconds. If I press the power button again the blinking light and ticking sound happen again for a few seconds. If I repeat pushing the power button on the TV again the blinking and ticking will then go on all day long unless I unplug the TV for 15 minutes or more. All during this time the screen is dark. Just before this ha


... Samsung TXL2791F 27" TV

I have a Sony Wega KDF-E55A20 rear projection LCD TV. The screen stays black when pressing the Power On button. When the Power on button is pressed, a GREEN blinking light (5th light in a row of 5) comes on and blinks about 58 times, along with an intermittent "popping static" noise. It then goes to a STEADY RED accompanied by the 2nd light in the row of 5, BLINKING RED. It continues like this until I unplug the power cord. It will do the same thing if I plug it back in an press the Power On but


It sounds that the SCL ' SDA signal path has some short. You must have thorough knowledge in electronics to follow. Checking I2C bus signals is a skilled work. If you wish to get more details, ... Sony KDF-E55A20

Panasonic cinema vision, model pt-47x54j, power light stays on, with no blinking, when pressing on power button on tv with no picture, sound or menu, then shuts off after 30 seconds. If I use remote to turn it on, power light on remote flashes 3 times


... Panasonic Projection Televisions

I have a Samsung SyncMaster 730mv 17' Monitor. It's been sitting for nearly a year. After charging it, the power button does not turn on the monitor. I've pressed the Menu button & the Power button to get a reponse of a blinking green light [3 blinks] yet it will not power on when the Power button is pressed. Any ideas on what is going on??? I am not computer Savvy' [The result I'm looking for is to utilize the monitor with my Asus laptop.] -Ty for reading'


... Samsung SyncMaster 730MW (Silver) 17 in. HDTV-Ready LCD Television

I have a sharp aquos lc-c5277un. Both the power and OPC lights together blink twice. I tried unplugging it, holding down the volume up and channel down buttons while plugging it in. That left me with a solid power light on. I pushed the power button to turn it off and it turned off. Pushed it again to turn it on. It turned on and worked. 10 minutes or so later I heard a pop sound and the lights started blinking as before. This loop has played out three times. Is this the power board or


... Flat Panel Televisions

I have a Panasonic HDTV 1080i. The Tv keeps turning itself off and the power light turns yellow and blinks. If I wait for 5 minutes and press the power button the TV turns back on and sometimes it stays on and sometimes it switches back off. The lamp light does not light up or blink just the power button. Any ideas?


Hi,I am sorry to hear regarding the trouble. However, there are few possibilities that could cause the same issue. If you have electronics repair experience, and wanted to diagnose / repair the set yourself, revert and i would be able to ... Panasonic PT-60LC14 60" Rear Projection HDTV

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

When trying to turn it on the green light comes on the front, we hear a small zap sound, sounds like it is trying to come on and then the green light goes out... it will do this consecutively three times with one press of the power button. Then you have to wait 2-3 minutes before it will respond to the button press. We have done this for up to a half hour until the tv finally comes on. What is wrong?


Hello,This type of fault can be repair, it could be a short circuit on the panel power board, remove the back cover of the television in this you have to resolder the panel where you can find dry soldering, but if otherwise a common probl ... GE D52GW12 52" Rear Projection HDTV-Ready Television

My tv will turn on but no picture of sound will show. The screen is completely black. When I press the power button on the remote the standby light on the tv blinks red twice then a smaller than usual blue circle appears.


Hi,Problem is in either power supply or the Y-Sustain board.The Y-Sustain is a relatively large board out of which go connections to the side of the display; it's therefore closer to either the left or the right side of the di ... LG 42LG30 42 in. LCD HDTV

My sony tv k353s70 has red blinking light, no sound, no picture, but i do hear a click when i press power button


... Sony Projection Televisions

DP46849 has black screen with power light on. Dish network is working as remote tv is operational. Pushing any button on either DISH or Sanyo remote causes power light to blink. No sound. Power light blinks by its self every few minutes.


It may be in safety shut down mode due to shorted circuits or power supply failure due to such thing as bad DC filter caps. You will need to do in-depth troubleshooting.\012See ... Sanyo DP46849 46 in. HDTV

Received this TV from a friend, was working when it left his house, I have place on tv stand, plugged it in, hit the power button, it came on for a breif second. Now the on-timer light is blinking, I can hear the (possible) tube kicking (a clicking sound) but can not get the tv on, nor can i get the tv to stop blinking the on-timer / power light. At times it is a fast blinking (once a second), other times it is blinking slower, (once every 3-5 seconds). I do not have the original remote, but hav


Did u ever find a solution? ... JVC AV-32150 32" TV

When pressing the power button it sounds like the tv will power up but nothing. No sound or picture. Red light on power button just flashes. It is a constant flash no pattern


... Projection Televisions

No power to tv. When i press the power button i only get a blinking green light then it stops and the blinking red light for lamp flashes and keeps flashing


You need to replace your lamp. Also check power supply and ballast board. Most of the time if you replace the lamp it will come back up. After replacing the lamp you will need original remote to reset lamp hours. ... Sony KDS55A2000 55" HDTV

Dead tv Hi, I have a 50" samsung plasma tv that seems completely dead. 3 years old, the other day we heard a pop sound (sort of like the sound a lightbulb makes when broken) and then the power went off and never came back on. When you press the power button absolutely nothing happens, no sounds, no power light, just dead nothing. the model # is PN50A650TLFZC and the version is KX03. do you have any trouble shooting tips please? thank you


... Samsung PN50A650 49.96 in. Plasma HDTV

I have a Sony bravia KDL32 L5000. pressing power button will turn green light on, but no picture no sound. Cannot turn tv off by power button. Have to unplug tv to turn off. Can hear click when you plug in tv and when you turn on with power button.


Hello,You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where, if otherwisethe power supply board is dead,do you know basic electronics' and soldering? Most of ... Sony Flat Panel Televisions

My Mitsubishi WD 60735 blinks the orange light as soon as I plug the power cord in. When I press the rest button the green light flashes for one blink then goes right back to blinking the orange light


... Mitsubishi WD-60735 Projection Television

TV turned off by itself one day. I pressed reset, timer light blinked green for a minute, then I pressed power and it sounded like it wanted to boot up, but nothing happened and the status light turn


Two thoughts:First is this is a DLP set and the lamp may have failedSecond is it should have the self check which reads error codes---most of these sets that is the same:" After you turn on the set, and get the regular red bli ... Mitsubishi WD-Y65 65" HDTV

Power light is red and flashing. when we press the power button it sounds like it's trying to power on the light turns to flashing green for a few seconds and then the power cuts off and turns back to flashing red.


Hi,Flashing red light in Sony tv indicates that tv got some internal problem and went on protection mode to avoid further damage. Now it needs service/ repair.Blinking red light also has an error code that has info about possible cause of ... Sony KDS55A2000 55" HDTV

My JVC LT-47GZ78 will not turn on. When I press the remote power or the main power switch on the set button the blue LCD light on the front of the TV lights and then starts to blink, the TV does no come on. Also there is a cliccking noise coming from behind the set. I'm in a country with 220v power supply.


The blinking indicates that the protection system of the power board from the tv has detected a short on one of its outputs and has cut the power to it to prevent further damage - the clicking is made by the main power relay being disengaged, repeate ... JVC Flat Panel Televisions

Lnt3232hx xaa unit is lcd when powered on standby light blink sound effects cue but set is dead standby light goes off when pressed again turn sound cues and standby light goes solid again


... Flat Panel Televisions

Hi i have an 50 inch LG 50PG20D it can be turned on but it has no picture and no back light . the red light comes on and it changes when pressed power button . It seams that i can use all functions with frame buttons and my remote ( green light flashing). Im not sure if it has sound is on ,you can hear some noise but not sure if its audio or just tv buzzing . Please help!


... Flat Panel Televisions

TV has power as red light on stripe comes on, I press the on button on the remote and the power in the TV makes the sound that its about to switch on then nothing happens, the light doesnt turn to blue. After approximately 30-60 seconds the red light appears again


Replace the power board. You can get the power board from www.tvcircuitboards.com they will aslo assist you with determining which one is the correct one for your model. ... LG 50PG6000 50 in. HD-Ready Plasma TV

When I press the power button, the power on light on the TV lights up 3 times followed by a weird sound and nothing else happens. The TV repair shop says I need all of the following: Deflection board: 18405415652866 HV Board: 18606432212450 CRT Board: 184184372415 for a total of $500, can I trust his recommendation and where I can get these parts with free installation instructions?


That seems the whole lot of the set and it is not wise to spend this sum for a suspected complaint. if you are able to track the board and get to component level diagonises it will save a whole deal than to spend this sum. I think you need to che ... GE D52GW12 52" Rear Projection HDTV-Ready Television

Hi, i have a 42inch Dynex Flat Screen, the issue i have is that when i plug in my Tv, the little red indicator comes on showing that its ready to be powered up, but when i push the Power button the Blue indicator comes on but there is no picture and no sound, the screen does not light up and nothing is displayed when i press the volume, channel and menu buttons, how can i figure out what is wrong? I hope its just replacing a blown fuse or something, Can u help?


I will give you some general info and some ideas--let me know what you find or if you have questions.I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby chec ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3311 seconds