Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have a weird problem with my samsung 933sn monitor. It was working great for two years, but now it works only in DynamicContrast mode,every other setting gets me a very dark screen, i have connected It to my laptop, same thing. My graphic card is ok, it is just weird. The screen gets so dark, i use my flashlight to open OSD menu and somehow i get it to DynamicContrast mode,turn it off, then turn it on, it works. When i unplug it from power source and from computer, I get
Samsung SyncMaster 933SN 18.5in. Widescreen LCD Monitor
I have Samsug LN-S2651D TV. Recently the screen turned green (no picture). Sound works fine. Cable remote will cycle through channel changes OK. Cable 'TIVO' appears to work OK. TV Menu's seem to work OK. Picture menu: Mode=Custom; Size=19:9; Digital NR=On; DNle Demo=Off; Film Mode=Off; Blue Screen=Off. How can I get the picture back?
Samsung LN-S2651D 26 in. LCD Television
Upon my return from being out of town yesterday, when I turned on the Phillips 50PF9830A flat screen TV (circa 2005, but has worked perfectly all this time), the settings MENU popped onto the screen, and will not go away. The TV is connected to a Comcast cable box and BOSE surround sound system. The only way to move through the MENU screen (with all the settings options) is to use the original Phillips remote. But, there is NO way to get the menu to disappear from the screen. If you navigate
Philips 50PF9830A 50 in. Plasma HDTV
PHILIPS Software /Hardware problem
32pfl5522d blue screen nothing works
Checked the basics holding menu ,
Connecting av source i get nothing
Just blue screen, psu looks ok. I also noticed the blue led flashes when pressing menue or program keys
Only buttons what work are power and volume keys
Any knowlege of this uncommon problem would be ace :D
Philips Flat Panel Televisions
Dark screen husband rolled over on the remote, have directtv all other tvs work well just this one dirrct tv says its the tv not them scsreen is dark can see red green and blue thats all the light it puts out also it seems to be in analog mode and I can't see the screen to try using system setup I tried going to tv mode and changing the channel to line one to or aux/ but can't get it to go there any ifeas
Sansui TVS2750 27"
Philips 42pfl5522 LCD TV.
Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen.
It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day.
I'm not sure if
Flat Panel Televisions
Had power cut when tv was on. Now comes on but black screen and then snowy screen then says not programmed. Can't get remote to work on side control buttons so can't get into menu to try and reset or retune. What is wrong? What can I do?
It is possible that when the Power supply failed the MEMORY WAS ERASED and so the programs that were memorised on the TV was lost.\012Remove the power plug and push down all the controls to drain off residual voltage from the processor to allow ...
Flat Panel Televisions
Sharp aquos getting only audio and blue screen for video :(
i have done all troubleshooting steps and now just want to buy the board needed.
all caps are looking ok
tried the reset.
tv just turns itself on when i plug it in
dont have the remote so no clue if menu shows up.
backlight apears to be working and when i hook up xbox 360 i can hear it boot and see the screen get brighter (not much)
thanks for your help
HelloDigital video processing stage on the main board is faulty. The main board mey need repacement ...
Sharp LC32D62U 32 in. LCD HDTV
My 2001 Toshiba TV will at times work fine. Other times the screen goes black. When it goes black after repeated times of unplugging/plugging it from the wall (no obvious process makes it work - it seems random) it will then start working fine as long as I keep it turned on. When the TV is in it's "Black Mode" I can't even get the OSD to display. When it's been "warm and working" I can turn it in and off at will and it performs properly. Starting cold, I have go through repeated plug/unplu
These Sets are well known for Poor Solder Connections pull out chassis and resolder the Board and this should fix the problem. ...
Toshiba 36A60 36" TV
Blue screen i turn on the tv and all i get is a dark blue almost black screen. i did what vizio said to do to do a reset of the tv and that never worked 1 month out of warranty
Vizio m420nv 42 in. LCD HDTV
I have a Sony KDL-46S4100 LCD that was given to me that doesn't work. It powers on and the power LED is green and the backlight to the tv works and stays on as well but I get no picture or on screen display such as the menu. I can hear sound from the speakers when the input is set to the correct one. I purchased a replacement T-CON board but the problem persists. If I do the LVDS cable wiggle test I can see noise come up on the panel. It varies from vertical lines of different colors to whe
Sony KDL-46S4100 46 in. LCD TV
I have a compaq w185q lcd monitor for pc.I have got a tv card with it so i can also watch tv with it.But today while watching tv on it i changed its input signal to something like 1600x..the screen suddenly black out with error message input signal out of range change to 1300 x..like this.and to change the setting i clicked menu from remote but menu doesnt appear so i couldnt reset it.it works fine when i switch to pc side but on tv side i get this error message.what to do please help!
Flat Panel Televisions
Hi, I have a 60VS810 60inch LCD projection and the blue power light flashes but no picture comes on...i just got it for free so i dont know how it worked before..yesterday i did get a blury pic on the screen that kept moving so i couldnt read the menu bar but u can slightly see the menu options..only the blue power light flashes nothing else..what could this be..the lamp looks good and the bulb is fine..what else is there so i dont have to pay hundreds to fix it
Flashes of blue light are fault indications. From the number of flashes occurs at one time switch on, you can get an idea about the faulty section circuit board inside. If you wish to get details about these blinks, ...
Hitachi 60VS810 60" Rear Projection HDTV-Ready Television
I have a spectra flat screen lcd tv and I had to get a universal remote to get to the menu so when I turn on my tv with cable a box is coming up blocked with 4 squares under it I tried the 0000 code it doesnt work also the 4374 nothing can somebody help me
Emerson LC320EM9 32 in. LCD HDTV
My Philips 26PFL5302D/37 will being working great then it will go black. For a few minutes it allows you to go to the menu but it will not allow you to turn the channel. Then it eventually just be black, blue power light is still on, and nothing will happen. I trying turning the tv off and unplugging it but I get the same power on but nothing on the screen. I wait half an hour or so and it turns on and works again. What do I do to fix this???
Hi,what makes the TV malfunctioning this way is because the TV is overheating....Overheating might be from capacitors or IC inside the TV set...To fix it, you will need to check the capacitors or IC if the dry joint soldering of th ...
Flat Panel Televisions
Blank screen My LCD television, model LT-32E479, suddenly stopped working and has only a black screen. When I turn on the power the blue lamp lights, but I cannot get a menu. After about 1 minute, the power turns off.
JVC LT-32E479 LCD TV
I have a blue screen on startup of my tv a grundig gu19wdt, it's not the digibox/sky/cable or whatever else, it I asking for a child pin which I do not have and the reset child pin options don't work. I cannot get anything other than this screen on the tv. Is there a maintenance menu code or factory reset code to override this?
Please go through operation manuals and follow step by step. ...
Flat Panel Televisions
I have a samsung le40m87bd lcd tv that does not work. I have to hold in the on/off button for at least 10-15 seconds for the tv to come on. I then have to mess about with the picture menu to get a picture and even then if i choose certain options the tv goes off or turns to a multi coloured screen.
Flat Panel Televisions
I have an LG 37LC2D TV. I was connected to Direct TV with no problems, then we had DISH with no problem...now we are connected to Time Warner and I am having all the problems described re : picture flashing on and off..unable to get tv menu to come up..sometimes will work for a few hours or just a few minutes...sometimes the screen is just black.Is there some kind of re-programing I could do with the original LG remote control? Any hints? Even when I unplug everything and just try to use the T
Hi,Sounds like the TW box is the problem try swopping the box with a new one.Good luck ...
LG 37LC2D Television
Moved tv in....it worked before I moved it....now I cant get a clear picture on any input. I pull up menu and it is clear and the sound is fine. Do I have screen probkems now or could it be the inputs in the back?
Hi Scott,\012\012Try to wiggle the input cord also the jack. If the picture come out clear then you might have a loose connection. To confirm you can swap a new cord and then hook up again. If the symptom is still there then you have a loose co ...
Samsung Projection Televisions
Kdl-32s2010 .... after 1 hour, screen goes blank. I can get to the menu and switch to digital then back to analog and it works fine for another hour. it is hooked up through a regular cable to a sattelite box.
The sattelite box have issues,tries unplug,replug the box back like about an hour later for it to reboot and resetting and upgrading it softwares.This tv problems switching modes to digital and to analog again back and forth should be solved.Still ha ...
Sony BRAVIA KDL-32S2010 32 in. LCD Television
Sony KV- 20FV12 get no signal on screen. Same cable outlet works on other TV as a test. Cable ON in menu. Auto Set search produces search but still no signal.
Hello\015\012\015\012If auto search is going on smoothly, and there is no stations on air is memorized, and display no signal, there are tow possibilities. The first one is antenna is not connected properly. Check the antenna connection ...
Sony KV-20FV12 20" TV
Just change the bulb few month ago and the screen in the lower center starting to get dark working it way up to the top
Hi, did you make sure it was the right lamp the reason is that theres two types of lamp one that shoots the light wider and another that concentrates on the center.Also check the ballast the main power of the bulb it comes to happen that when u put i ...
JVC HD-61Z886 61" Rear Projection HDTV
Panasonic Viera TC-L32C12 LCD TV The tv screen is dark. Sometimes a channel flashes on and off, sometimes with sound, usually with no sound. The remote will turn the tv on and off, but do nothing else. I wanted to rescan the channels, hoping that was the problem, but I can't get the remote to work with the tv. I tried new batteries in the remote and reconnected the antenna.
Panasonic Viera TC-L32C12 32 in. LCD TV