Having problems with your Standard (CRT) Televisions ?

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?



Answers :

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Standard (CRT) Televisions

Cs-21Z57ML samsung TV some problem in this TV all the component it work normal,sound and tuning search system it work in normal condition but not display picture,I am try by changing the tuning system but not solve the problem.please how to solve this problem?


... Samsung Standard (CRT) Televisions

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b


... LG Flat Panel Televisions

I have recently bought a sharp aquos lc 40 le811e tv set,im havin problems tuning it i have a new antenna installed and when i try and auto tune it says there is no signal,i have also tried 2 differant types of portable antenna made for digital tv and still nothin works,cos of this i have to continue using my digi box although the tv has built in freeview,also cos of this i cant use most of the features on the tv set,i have tried so many times to tune it but still nothing works,could u tell me w


Does it have a built in digital tuner? unplug wait 5 minutes hold power button while you plug it in you should get into a secret menu usd by techs look and see if you have a digital tuner hope that way works for that set ... Sharp Flat Panel Televisions

I have a lg blue ray bd550 home theatre system. I have been using it for a few months now. For some reason, my netflix has stopped working. Everything else works so I know it's not an internet connection problem. Whenever I try to use the netflix account, it reads "Cannot connect to Netflix. Please try again later. If the problem persists, please visit netflix.com/tvhelp on your computer." I have done this and it tells me I should connect LG. What do I need to do to fix this problem? Thanks!


... Flat Panel Televisions

I am having 21inch CRT BPL color TV. when i switched it on channel is coming and its automatically tuning and only grain are coming.. (means missing channel) I tried auto tuning,semi autotuning and manual tuning its not working. But Fine tuning is working until i stick to one channel. howerver if i change the channel , same problem occur.. Please help me in this regards


Check and replace its main system memory IC. It is faulty. ... Standard (CRT) Televisions

Whenever i plug my sony bravia KLV-32U300A, it click twice and doesn't turn on,power sign goes completely off. I have to unplug from the power source, wait 5 mins and try again, it rarely turns on, but does so if you try it after 4/5 hrs. Once the tv on it works fine. how can i rectify this problem? is it from the power board problem or the main system board problem? Pls help me thank you.


Hi,\012\012This is an indication of out-of-regulation in the power supply section. The very\012common caused of this fault is the leaky\012electrolytic capacitor ... Sony Bravia KLV-32U300A 32 in. HD-Ready LCD TV

Hi, I have a Sharp Aquos LC-19DV28UT given to me as a gift. I connect the cable from the cable box to the TV, give the remote the proper code, and the TV turns on OK. But then the picture flashes for a brief second, then the picture goes away. The sound is still there. Whenever I try to display any type of menu, it does not display. I tried the TV on 2 different cable connections that work with the current TV, and same problem. I have a feeling there's some setting I need to adjust, but c


... Sharp LC19DV28UT 19 in LCD TVDVD Combo

Database empty Sharp Aquos LC-42XD1EA showing database empty, even after constantly retuning. Analogue signal supplied by powered distribution system in house loft, and all televisions supplied by this (including other flat screens) work fine. Tried it on other ariel leads in different rooms with same result. Tried Factory Reset function, and still no change. It will play from DVD recorder, and have tried connecting to old freeview box (it gets signal and displays picture but is very gray). Any


... Sharp Flat Panel Televisions

I just bought a Mitsubishi WD-60738 everthing works on the tv with one problem my Sony BDV-E370 Sony 5.1 Blu-ray Disc System also new sometimes does not display a picture when i use my hdmi going to the tv. This is what i have been doing to get it to work i going into the tv and hard rest the thing and when it comes but up the hdmi works and then it goes out again causing me to rest and setup all over again. Can you tell me how to fix this with out resting or tell whats causing this.


The handshake between the two devices is being lost. Sometimes it takes going into the television's service menu for an industry initialization to remedy this problem. However the hard reset you have been completing is what is recommended first befor ... Mitsubishi WD-60738 TV

HI I have a Panasonic Blu-ray Disc Home Theater Sound System Mod SC-BT735 which works fine manually but the remote will not work although the DVD is receiving the signal. Every time that we press a button on the remote we get a message on the display which reads SET 2. Could you please help with this problem. Pete


That is because the remote control is set to remote number 2. Set it to remote number 1 and all will work or set the switch on the Blu Ray to number 1.Hope that helps. ... Panasonic Flat Panel Televisions

My wireless speakers of my panasonic SA-PT860 home theatre system are not working. The receiver unit LED is always red, though it used to work on GREEN. On the main unit, (W1) flashes, which as per panasonic identifies a frequency conflict. I have tried to switch off every device that might cause the problem but all went in vain


Hi snathan05,\015\012\015\012Your unit is in standby mode only and does not power up because it has a problem in the power supply section. This section missing some voltages which will drive the main processor. The very common caused of this fa ... Flat Panel Televisions

I have Pioneer plasma tv with media box PDP RO6G and tv PDPS37 and not working. The lights are flashing red to blue on both reeceiver and display. Do I need to reset. I unplugged for 5 min and tried again and still problem. any suggestions and how to reset if tha tis the problem?


... Flat Panel Televisions

Hi. My Sony KDL32EX400 started to have unusual problems few months ago. Channel, volume, menu, setting, controls stop functioning. (The little green led is flashing when trying to switch channels or control volume, but nothing else happens.) The only function works is the power. After I turn it off it shuts off but sound remains for another 30-40 seconds. Also sometimes display info remains on screen after TV turned on then the same problem happens, as mentioned above. I have to note that it do


Hi,Does Standby light flash/ blink on tv when it does not show picture or any display in screen?If standby light blinks, please count how many times it blinks after three seconds long pause to diagnose possible problem in tv.And if ... Flat Panel Televisions

Have been trying to access menu setup from mt phlips tv model 17ht3402/67r but still not able..have tried with the codes 319753mute doesnt work,what can be the problem?and how may solve it?


... Philips 20PT6441 20" TV

Help i have a problem on my LA32C450, when i turn on the power,volume was up and up.The lamp indicator was blinking and display appearing volume graphic.And it can't be turn of.I try to change the remote control to control but its not working.Can anyone solve my problem ??


The volume up button on the set is likely bad (may look ok) Someone needs to open set and disable (unsolder) that switch.With ANY of the front buttons bad in this way remote or other front controls usually will not work--No magic wand wil ... Samsung Flat Panel Televisions

MY LCD LA 32 B 450 ITS REMOTE IS NOT WORKING AND I REPLACED THE BATTERY ALSO.AND THE DISPLAY IS ALSO SKIPING AUTOMATICALLY.SOME TIMES ITS SKIPS TO AV1,MENU.AND PC.CAN U SOLVE THIS PROBLEM. THANX


... Samsung LA32B450 32 in. TV

My Lg Flatron was working good but suddenly i cannot see any picture on it nor any channel is getting tuned after changing to AV mode the DVD gets connected ,tried setting the cable channels by surfing but still the problems persist.There is no picture nor any sound on TV mode only a blue screen


... LG Standard (CRT) Televisions

This is about an approximately 10-year-old Toshiba DVDVideo/Audio Player SD-4700. Has always worked well. Problem. I am watching TV series The Tudors from Showtime Network. Got the DVD's from the public library. All of the series's disks have played except the last disk in the final series. The DVD display window says "DISK ERROR" and there is no picture or sound. I have tried four different sets from the library and no one else has complained, but this "DISK ERROR" happens every time on this on


I think you must in this case give the benefit of doubt to the player. Since all the disk in this series is playing well then the particular disk can have fault or damage on the tracks that seems to send in the errror as the scan encounters the error ... Flat Panel Televisions

DVD144RC TV has stopped working, no standby light. TV just shut down whilst my son was playing his Xbox. I have tried fitting a new fuse to the plug but this has not solved the problem.


Usually means a fried power board and/or inverter board.not user serviceable ... Flat Panel Televisions

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

How can i tune my tv in to recieve freeview channels?? tried everything with no luck. cant even get analogue channels? i know this isnt a problem with the aerial as other tvs work!!


In the US, you are not able to obtain free HD channels without a tuner and an antenna. Some HDTV's have built in tuners and depending on your location to the broadcasts, you may be able to obtain reception. It is possible that one of your TVs has a ... Flat Panel Televisions

My Samsung Plasma 42 in. TV turns itself off after a couple of minutes of being on and then makes a clicking sound like its trying to turn on again but it doesn't turn back on. It just makes this clicking sound. If I unplug it, sometimes it will function normally again and sometimes the same problem occurs. We thought it might be the power strip so we plugged it into a different outlet. At first, this seemed to work. Then, the cable box and the sound system started turning off spontaneously


Try checking the standby mode. . . ... Flat Panel Televisions

Hi, I have a 27 inch Dynex LCD TV model: DX-L26-10A manufactured (June 09) I've been using it for tv as well as an external display for my mac with an HDMI cord. The tv was working fine yesterday, then when i came to turn it back on there was sound from the TV, but no visual but my direct tv's 'please wait' then black. nothing and a high pitched frequency sound everytime i turn the tv on. Does anyone know what the problem could be? I've tried unhooking/rehooking the cords. still i get that so


... Dynex DX-L26-10A 26 in. HD-Ready LCD TV

I got a jvc rm-c253 tv that has been work great until today..my problem is im trying to watch a movie/show i have black square blocking most of the picture how do i solve it


Hi -\015\012Your comment suggests that your problem has been solved. However, as you only left a comment and did not accept the solution, your question has been returned to FixYa's unsolved problems list. ... Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4847 seconds