Having problems with your Flat Panel Televisions ?

Screen is displaying Red background color with glittery pixels effect around the figures

\015 My LCD TV is 3 years old and recently started having this problem . When i turn it on, it displays Red background color (instead of usual black) and then once the picture come on, it displays this Red Green glittery pixels all over the screen especially around the figures and is very dynamic. It moveds around the screen with the moving picture. Also, this glittery pixels effect is more noticeable around those sections of the picture that have black color..\012\012Does anyone know what's the solution to this problem?...Which TV part has gone bad and needs to be replaced?\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Screen is displaying Red background color with glittery pixels effect around the figures

... Samsung LN52A650A LCD TV

Samsung LCD LN52A650AF - Glittery Red Green Screen Pixelations that moves around with changing figures on the picture

... Samsung LN52A650A LCD TV

The screens displays Rainbow colored "pixels" running diagonally across the screen from top to bottom. it is on all inputs, even when no input is present, the black screen shows the same rainbow colored diagonal pixels. This appears to be on top of the picture.

What is model number and brand of your tv to find out possible cause of this problem. ... Flat Panel Televisions

I have a hcn5527w rear projection tv i hafd a bad bowing effect and all colors were off set after reading what many of theexperts said it sounded like a convergiance problem so i order a board not just the chips and replaced most of the bowing went away but some is still there and the colors wont merge on th left of the screen when your looking at the manual adjust screen the reds + are off set left and on the right they are offset right i adjusted the center to perfect i che

Did you try aligning the crosshairs of red blue and green in convergence adjustment? Also what adjustment did you perform? Auto-adjust or 9-point adjustment? ... Samsung HCN5527W 55" Rear Projection Television

Hi, i have a 42inch Dynex Flat Screen, the issue i have is that when i plug in my Tv, the little red indicator comes on showing that its ready to be powered up, but when i push the Power button the Blue indicator comes on but there is no picture and no sound, the screen does not light up and nothing is displayed when i press the volume, channel and menu buttons, how can i figure out what is wrong? I hope its just replacing a blown fuse or something, Can u help?

I will give you some general info and some ideas--let me know what you find or if you have questions.I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby chec ... Flat Panel Televisions

My LCD projection tv(KF-50E200A) displays projection lamp week when switched ON and out of red color display on the screen. Is this will happen if the projection lamp is week?

No and yesthe lamp warning is to alert you that a timer has expired that clocks the approximated life of the lamp in "hours of use".it is never accurate and is dependent on whether or not it was reset the last time a lamp was replaced. ... Sony KF42E200 TV

I changed my two IC chips and three resistances on my Hitachi TV to fix color alignments. Now the problems is that yellow and blue double image are seen at the bottom of my screen with no much effect on the rest of screen. Manual convergence show a white horizontal and vertical lines with focal right horizontal end with red line no aligned, but if I fix this side, the left side is disaligned. So, I am lost. What can I do?, what is wrong?

Ur tv still have dead resistors parts,test all 12 resistors parts around the 2 STK convergence ICS and changes some more dead resistors parts or changes all 12 resistors parts for sure.If tv still have the same problems after tested and replaces more ... Hitachi 43FDX01B TV

I have a 29inch Sony Trinitron Color TV model # KV-XG29M50 which is around 4 years old...The screen went black all of a sudden and the power indicator on the TV flashes red 5 times every 3 seconds

... Sony FD Trinitron WEGA KV-29LS35 29" TV

I have a 63' projection TV. The picture is off. All of the lights are working, but the images are fuzzy, and you see the image tripled. The three images overlap each other in red, green, then blue. It seems like the colors have to put back in sync to form one clear image. Also I can see a bow effect at the top of the screen.

Please do us a favor and rate this solution after reading. Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are ... Philips 55PP9363 55" Rear Projection HDTV-Ready Television

Half of our 46" screen is cast in a black shadow with the figures in the background bright red how come ?

Does the problem go away when you tap the side or top of the TV set? ... Sanyo Flat Panel Televisions

My Phillips 42PF7320A/37 has stopped displaying the picture properly. The screen is polluted with black lines and red pixels. Any help would be greatly appreciated.

Look for loose contacts in power outlet, RC Jacks, sockets, cables. Change input device to some other like a DVD that you are sure works. ... Flat Panel Televisions

I have a panasonic viera lcd. Suddunley the screen Started to show red waved. Even when no display is selected - eg putting the screen on an unused port - the screen will show red waves and dots. Even the display on the top left corver like

... Panasonic Flat Panel Televisions

Screen looks green and there is no possibility to adjust color with the manual control. Tried changing Iris but to no avail . The screen was showing a blue " stain " but still the colors were acceptable before it went green screen. Screen flickers and red color tries to enter but it flickers again and goes green

Hello docstove!\015\012looks like it has some cooling liquid problem, please contact service for repair.\015\012regards ... Sony KDFE50A10 50" HDTV

While watching TV - I heard a slight click noise in the remote and the screen color immediately changed color to predominately green ( still see blues and yellow) but red spectrum is not working ?? I have played with color/tint/contrast settings and still cannot get back to the red tones ??? Tv is maybe 5-7 years old ( not a flat screen) and it has never given us any trouble before this???

U have all the tools and can u also do basic soldering?Tv might have cold sodering joints on the CRT video board socket that connected video board and the CRT tube together.Must take tv aparts and resolders all the CRT holes sockets of the video boa ... Toshiba 32A33 32" TV

Proscan tv screen changing screen colors after trying to program tv remote. From green, to blue, etc. What is it? Read more: Why deos my screen keep changing colour flashing red green and blue? - I have sanyo 32 lcd tv screen changes red blue and green :

... Projection Televisions

Panasonic TC-P54G25 has a red horizontal line in middle of screen and THX mode cause multi-colored horizontal band at bottom of screen. I've tried resetting to factory defaults and removing all input. The red dashed line is still there and choosing THX mode causes a problem.

... Panasonic TCP54G25 54 in HDTVReady Plasma TV

32 inch sony bravia EX400 showing distorted colors and red screen on start up

Reconnect the cable that goes from main board to tcon.. if this dose not work out change the tcon board which is cheap arond 25 US dollors.. ... Sony Flat Panel Televisions

Screen issues Originally bought in 2005. We replaced the lamp bulb in 2011, now every time we turn on tv, it says reset lamp , also we get red vertical lines about an inch apart , all across tv, then in left lower portion of screen a green glow, circle around 4 inches, how can we correct this, also would it be cheaper to buy new tv, and what brand and type would you recommend? The red vertical lines come and go as does the green glow.

I think better to replace the set as all this sounds like a light engine failing. ... Projection Televisions

Is there something that I can do to stop the color on my tv channels from turning red. everything on the screen is starting to look red. I went in the settings to brighten the channel but It seems like the color is still changing.

... Sanyo HT32546A 32 in. Television

My Sony Bravia screen color was distorted when I turned on the TV. I've checked with other input port and confirmed it's not the TV cable problem. The screen color become very odd and with lots of contour/rings around. Can I know if this can be fixed and how to fix it other than contacting the Sony service center?

... Flat Panel Televisions

I have a problem with my PDP42x40000 it is with the power supply card the following components are damaged STR-F6467 capacitor 47u 35v resistor 0.22 ohm and when i changed this component i couldn't have a picture on the screen only the power led is on with red color and when i press on to have a picture it turns to blue color and go to red again i just wan to know what can i do to solve this problem this LG PDP42X40000 is on a SANYO plasma TV

... Flat Panel Televisions

My Samsung PN50A650 Plasma has a thin red and blue line running down the side of the screen and also shows a lot of red in the background when the picture is all black. Samsung tells me that the screen needs replace and its 1600.00 which is more than the TV costs. Any other suggestions that mey be able to correct this problem without the absorbant cost.

... Samsung PN50A650 49.96 in. Plasma HDTV

MY SONY TV LCD MODEL KF-50WE620 screen went blank. When I turn on the green light it blinks on 40-46 times every second, then turn to red color to Stand mode and blinks for 160 times, then move to power off (red light). This TV has been OK for awhile until TELUS OPTIK HDTV (box) device was connected, shortly after 2 days I heard a loud single sound like a sound of a smoke alarm, just once, "squeeek". Then the TV Screen went blank. The other device from TELUS is still on.

There is no reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective. \015\012\015\012 Might check fuse, R607, Q601, IC601, R612 and VDR601 (should show open).\015\012\015\012 ... Flat Panel Televisions

HLR-4667W color distortion and pixelation

... Samsung HL-R4667W Rear Projection Television

When switching on my Hitachi Digital TV Recorder Model HDR160 the On/Off Button goes Green, the Recorder displays "STARTING", as the display panel panel goes blank and remains blank, the TV screen display's "Please wait while the hard disk is initialised", as normal. After about 15-20 seconds the recorder switches OFF, for a split second as this happens, the recorder displays DVB or DV3 and the number 9 and the on/off button turns red, TV displays "No Video Signal. After about 15 seconds the

... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1680 seconds