Having problems with your Flat Panel Televisions ?

As I switch on my TV LCD Samsung (model LE37A656A1FXXC), some vertical coloured lines (semi-transparent though) appears in the left-center of the screen. After more than 30 mins they disappear and they come back from time to time. Unfortunately my warranty has expired. Someone says it's a problem with the T-CON Board. Could you help me find a new one or suggest me how to fix the problem? These are the numbers I've found on the board: 72.37T04.003-O-JC1 Rev. N.: 2007-08-23 Code.no: BN41-0944A



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

As I switch on my TV LCD Samsung (model LE37A656A1FXXC), some vertical coloured lines (semi-transparent though) appears in the left-center of the screen. After more than 30 mins they disappear and they come back from time to time. Unfortunately my warranty has expired. Someone says it's a problem with the T-CON Board. Could you help me find a new one or suggest me how to fix the problem? These are the numbers I've found on the board: 72.37T04.003-O-JC1 Rev. N.: 2007-08-23 Code.no: BN41-0944A


... Samsung LN52A650A LCD TV

Panasonic plasma tv tc-p50g10 blinks 7 times i found out it could be the su'sd orsc board how i find out witch board is witch


... Panasonic TC-P50G10 Plasma TV

Panasonic PT-60LC-14 Getting the 1 orange flash every 5 seconds code at random times. This code says fan stopped. I cleaned all 3 fans and filters I could find...bulb is only 300 hrs old. Tv had shut off again (with same orange code) while I happened to have the back still removed and all 3 fans still running. Can someone help??


... Panasonic Projection Televisions

Samsung ln40a530 Hello, I repaired the power supply on that TV. I changed four capacitor 10v 1000UF and 25v 1000UF and a small chip on the pcb QM806 (4894B: SI4894BDY equivalent) Now I have a good read on all output. Thank you for the help found here! But now I found a ground on the main board. 5volt is on the ground(short). I unsoldered some chip without result, the 5v is still on the ground. Could someone tell me what the problem might be?


HelloCheck the retifier diode for 5VDC for short. If it is OK, replace the regualtor IC [5VDC], if used. ... Samsung LN40A530 40 in. LCD TV

I have a Vizio TV VO320E model that I bought with a bad image problem. I have sound and it responds to the remote. The image is white with vertical lines that move across the screen. The T-con board is attached to the LCD panel, it is a small card measuring 1 "x 16", Two flat cable going to the LCD. I do not know if the problem comes from the main board or the T-con board (attached to the LCD)? There are several main board for sale on Ebay. Can you help me determine which one is failing.


Hi.based on my experience in repairing LCD TV's according to what you describe the problem must be on the T-con board however do first some re soldering on the t-con board and re tighten all the connectors on it.A loose cable connectors could result ... Flat Panel Televisions

I have a Rca 26LA33RQ upon initial use screen backlights bright white slowly fadeing to black. I do not know that the speakers work because I have not connect cable to it. I feel as if this could be the T-Con board. Or a low voltage production on my inverter board. I can find almost no information on this unit I repair al types of electronics being Navy trained leads me to try and find a publication to use but for this unit there is none. I am not even sure where the t con is on this one. There


... Flat Panel Televisions

I am having problems getting cable on my TV. The cable man told me on the phone to change it to either #4 on the back of my cable , and then the cable will work. The problem I have is when I look into the back of my Shart Flat TV I could not find where I am suppose to switch to #4. Right now I cannot get cable on my Sharp Flat TV. Can you help with this, getting the cable working on my TV?? Where can I find this switch #3 or #4 behind my TV Monitor? Sharp Liquid Crystal Flat TV digital Mode


Like i said in ur other post u have to find the input or source buttons on ur remote. Also fyi it's never a good idea to post ur phone number on the internet. ... Flat Panel Televisions

I have a Sony KP FR 53 Projection TV. It has stopped showing images in colour. Just only in Black and white. can someone help me? I have been told by Sony India, problem is inthe BH Board. Can someone help me???


... Standard (CRT) Televisions

I changed the main board of my sony 46ex620 and now is turning on for 2 seconds and the red light blink 10 times, I need help. I think I need replace the power supply board someone help me please


... Sony Bravia Kdl-46ex620 Internet Tv Compatible Full Motion

LG 32LB9D Hi there, my name is felix and i just want to ask you for help, i changed already the bad capacipor on my lg 32lb9d but i still having the problem that i has to plug and unplug the power cable couple of time to have sound and picture on my tv or i have to leave it on for several minuts until warm up. could you tell some idea of what to do to fix the problem? thank you for your help. PS. if i desconnect one of the cable locate at the top right hand side and plug it back the picture and


... LG 32LB9D TV

Hello there. I need some help with my tv and any help will be much appreciated. I hava a samsung LE46M87BD with a picture problem. I'm getting some black patches on the screen. This patches are not there all the time and sometimes if you tap the back of the tv they go away and then few minutes later come again. This happens from a 1/4 of the screen down. Googling it it looks like it could be the tcon but not sure. Anyone with same problem and sorted it? Thanks


The problem here is that it is intermittent--you may have to gamble and try that board and if fixed are done--if not go for another board--way of the world with these sets ... Samsung Flat Panel Televisions

I have a insignia ns-lcd37 that has sound but no picture so i assumed a bad t-con board i replaced the t-con board with a new same problem left tv on for hours in a darkened room i saw no backlight i checked all my voltages at the power supply every terminal checked out good what could it be


Its 100% sure that the source of the problem is the backlight inverter board. The fact that there is no backlight confirms this. You will need to replace the backlight inverter board to resolve this problem. If you can get me the part number off the ... Flat Panel Televisions

Good afternoon, Sirs! I bought an LCD TV Sony KLV-32S200A four years ago. Yesterday the TV didn't turn on. The standby light blinks 5 times and pauses for 2-3 seconds, then blinks 5 times again. Could you please let me know what the problem is and whether it is possible to solve the problem without fixing. Thanks for your help in advance!!!


Hello\015\012Blinking of standby light is Sony TVs are fault indication. Five blinks denotes \015\012AKB circuit (AKB), the timer/standby indicator blinks for about\015\01230 seconds then goes to the self-diagnosis function. ... Sony KLV32S200 Television

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful


Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

Sony Grand WEGA KDP-57WS550 blinks 10 times continuously, I have read the solutions about something on the D board. Can someone please tell me where to find a diagram so I can check the D board?


Bulb has died. Google tvModel and "lamp replacent". Will cost you about $90usd. 1 screw on side of rear right of tv.. Lift and pull replace. ... Sony Grand WEGA KDP-57WS550 57" Rear Projection HDTV-Ready Television

My 52 inch Samsung TFT-LCD tv is having screen problems on the left hand side showing bars some times and looks like it is pressed in or ghosting most of the time..It has never been dropped and kept in good condition.I have a video of it also http://www.youtube.com/watch?v=A8SV3vF7_AQ if anyone could help I would appreciate it!!


This tv it is the T-CON decodering board problems,if this tv never got hitting by an objects or by a person causing the damages to tv LCD screen panel.This T-CON decodreing board sit at the bottom in the middle of the LCD screen panel.Tries websites ... Samsung Flat Panel Televisions

What's your problem?Our Samsung TV, Model LE32 R 7 1B (R) C has problem with sound. The sound randomly fluctuates between zero and maximum without prompting. In addition, the TV is unresponsive to remote control commands, such as on and off, volume, menu, etc. Our TV is almost 6 years old. Could someone please help? Many thanks.


... ViewSonic NextVision N2010 20 in. LCD Television

New problem got no backlights changed power supply and ssb boards three times but still no backlights if anyone has an idea ow how to test them or fix it please help oh buy the way its magnavox 52mf437s/37 and they worked before ssb was changed first time


Do you have the 24V DC running into the Inverter? ... Philips Magnavox 52MF437S/37 52 in. LCD TV

First off like to say thanks too everyone thats helps out,great job!! Received this tv with cracked screen,worked fine just bad screen.Ordered screen and installed,now when powered up,screen flickers a few times and goes blank.Can unplug for few mins. does the same thing.Has sound.Dont see any bad caps.Did notice when first turned on heard a low crackeling sound by the board at top center,think its called t-con,little square board 5x7


Its a bad t-con, or different t-con for new panel ... Vizio VW37L 37 in. LCD HDTV

I have two small super bright white spots on the screen of my Mitsubishi WD-73833 and was advised by someone that it was a light engine problem. I have searched for hours and can't find any info on where to purchase a new "light engine" or EVEN IF this is the correct problem. Any help would be greatly appreciated!!! Thanks a bunch!!!


You do not need the entire light engine replaced. That would be a really expensive fix(about 1000$). All you need is a new DMD board. I can help you find a replacement if you are willing to fix it yourself and give you instructions to replace it ... Mitsubishi WD-73833 73" HDTV

I have a sony kds 60a2020. the lamp sensor light was flashing and no picture. i bought a new lamp and installed it and now all i get is red power light flashing three times. as much as i can tell am pretty sure the lamp door is secure. i understand it could be a power board board issue?? any help is appreciated


A lot of these had problems with the lamp door; you need to remove the door and take a careful look at it edgewise---heat from the lamp can warp the door.Notice the small plastic peg on the back of the door--when installed it engages a le ... Sony KDS-60A2020 60" HDTV

I have a panasonic TV model PT-47WX42F and it was working just find until last night . I turned it on came on for 1 second then turned off also in front of tv is red light that is flashing 3 times then stops and then 3 more time I think this is a code can someone help thank you


Tree flashes on the Led means that the convergence ICs' need replace and will cost around four hundred for the repairs ... Panasonic PT-47WX53 47" Rear Projection HDTV

Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.


... Sony FWD50PX2/S 50 in. Plasma Television

I have a panasonic TV model PT-47WX42F and it was working just find until last night . I turned it on came on for 1 second then turned off also in front of tv is red light that is flashing 3 times then stops and then 3 more time I think this is a code can someone help thank you


You have come to the right person:3 blinks constant is short protection and a 98% chance one of the 2.2 ohm resistors in front of the convergence chips is toasted---very common and known--I have fixed several hundred with this problem. ... Panasonic Projection Televisions

AKAI pdp4206em Replaced the Z Sustainer board which returned the picture but have a 2" wide vertical black line 9" from left of screen. Could this be a defective replacement board or another one? It did not have this problem at time of failure.


... Akai PDP4206EM Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2923 seconds