Suggested Questions/Answers :
It is recommended you read all this kind of situations
Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the
If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ...
Mitsubishi WD-73735 Television
We have a vizio hdtv vp42 plasma screen all of a sudden last night entire screen became dull colors are blurred picture is not sharp at all seems like all faded and we are looking through oil. we tried leaving off all day then reseting color settings but nothing has changed??? help
Vizio P2 42 in. HD-Ready Plasma Television
Hi, so I was told to replace my psu by a tech because of what the service manual said. I replaced it and its doing the samething. No picture but sound. All of the readings are coming out correct. I tried to do a reset on the logic but but nothing happens. I can do a reset on the main input board but nothing happens after it resets the TV. The fan on the main input board does not come on at all. Please help. I can control channel, source and volume but still no picture.
This no picture but sound issue is not caused due to power supply. The loic control board is also ruled out because all the other functions are operational. That leaves us with two possibilities 1) Sustain board(S) or 2)Buffer BoardsIt is not p ...
Samsung HP-R5052 50 in. Plasma HDTV
TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help
Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ...
Hitachi 57F500 57" Rear Projection HDTV-Ready Television
No matter which picture size I select, I cannot ever seem to get the picture from the DVD to fit the screen. For instance, I am watching a DVD right now that is in wide screen, and when in "Normal" size, the picture is sitting at the very bottom of the screen... and some of the picture is missing. However, if I change to other sizes, large parts of the picture are cut off. Is there any way to fix this? I have tried different things in the Menu... nothing seems to adjust where the picture sit
U tries used the DVD player remote to fix this problems,could be the DVD movie?Have the same problems,with the regular tv incomming broadcasting signal?Yes,than the tv Tuner signal board is the problems and the causes it dying and shorted.Tries websi ...
Sansui SLED2280 22 in. LCD TV
My Thomson DTI 6021-25 DVR is constantly displaying the following error message when I try to access my library or even turn off the box:
"Your hard disk drive is not yet ready. It will be available shortly."
I've tried turning it off at the mains overnight, resetting it by switching off at the mains and pressing power for 10 secs when turning back on, and resetting it by switching off at the mains and pressing menu for 10 secs when turning back on.
Nothing has worked. In the help setti
Flat Panel Televisions
The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue.
Is there a way to reset the tv t
If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ...
Flat Panel Televisions
Im trying to hook up my first gen 60g ps3 to my sharp lcd monitor, pn-455. im using hdmi for my ps3 - dvi for the monitor. all i get is a black screen. i've tried doing a hard reset and still nothing. if i use the component cables for the monitor it works but the picture is not 1080i. if i hook up the monitor to my laptop with the same hdmi-dvi it works with my laptop. why doesnt it work with the ps3?
Sharp PN-455 45 in. LCD Television
I have an Akai / Scott LCT32SHA LCD television. When I turn it on I get a blue screen and nothing else I have tried changing inputs and unplugging it, but nothing seems to work. Any help would be greatly apreciated.
Try and see if the AUX input works if you apply a signal to the input - DVD- and select LINE IN /AUX.\012If so the TV mains sections are in good condition as the suspected area of fault can be in the front end RF section , possible in the tuner ...
Flat Panel Televisions
Samsung LCD 32 inch
10 bit and 0 signal. It was working fine the. Switched it on and no signal we have reset and this has just removed all chanels, tried another cable for ariel and even tried the bedroom port ... Nothing seems to be on samsung website with that model number please advise of fix or whether this is just broken
Flat Panel Televisions
Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help
Flat Panel Televisions
The colour on my TV is awful, the colours are not true at all. Red looks orange, blue is glaring blue and sometimes the colours fade out a bit and then come back. I have tried adjusting everything but nothing seems to help. I'm not sure if these TVs have "picture tubes" anymore but is there something I need to replace or do I just throw in the towel?
I presume this is a TV with a picture tube, and if so, it would either be the chroma decoder IC or the jungle IC which could be possible causes of untrue colour, as well as the small components around them. Electrolytic capacitors, especially those i ...
Sony FD Trinitron WEGA KV-32FS120 32" TV
Hello my friendly fix it people's =]
I'm hear to see if I can't get any help possible with my new tv I recent got.
It seems when I turn the power switch on it goes straight to a blue screen. I've tri
If you are using the video option of the tv, press the av/tv button in the tv panel or at the remote controller. to get recognized the source that you have been hooked up. ...
Flat Panel Televisions
Sony KDS-55A2000. bought 1/07. replaced bulb 2/08. gave tv to parents 11/10. worked fine until last week. 1 on screen message, temperature warning (they checked all vents-everything clear and 1' away from wall) then lamp going out message came across. red light blinked 4x and powered off. I ordered new lamp assy came in mail today. parents installed. green light came on then red light blinked 4x-nothing. parents don't have extra income and my financial help is limited. any easy fix solutions????
You will need to check the fans are all switching on when you turn the tv on, it might be one of the fan sensors that has gone bad, the tv wont turn on if it detects that the fans or a single fan is not working. I have not worked on this particular s ...
Sony KDS55A2000 55" HDTV
MIRROR IMAGE ON MY VIZIO M420NV. aFTER TRYING TO UNPLUG AND REPLUG TO NO AVAIL. IR CURCUIT BOARD AND CABLE WERE REPLACED ON 7/9/2012. pICYURE WAS ok UNTIL 2 MONTHS AGO. NOW IT IS MIRROR IMAGING AGAIN. UNPLUG, SET BACK TO DEFAULT SETTINGS SEEMS TO WORK BUT DON'T KNOW HOW LONG THESE FIXES WILL WORK. nO HELP FROM VIZIO TECH SUPPORT. THEY GAVE ME A NUMBER TO CALL FOR REPAIR AT MY OWN EXPENSE AGAIN.
Vizio m420nv 42 in. LCD HDTV
Hi, I've been using my Samsung HLR 5087 DLP TV since 2004.
Right now, if I turn on the power, the buttons light up as usual and the smiley face shows up on the small circle display.
But the problem is the screen won't turn on at all..
Is it just the Lamp replacement that could be the problem??
Im debating if i should try and fix the tv or not....
Samsung HL-R5087W 50" HDTV-Ready Television
When i hit the device button on remote nothing comes up on the screen the green light on front of tv starts blinking and the tv shuts off shortly there after . i tried the reset button on front of tv doesnt help
This is known as the bliking green light of death problem. Its common and fairly simple to fix. You can get the parts and instructons from sites such as www.TvRepairKits.com ...
Mitsubishi WS-65809 65" Rear Projection Television
My LG lcd tv internittenly shows black horizontal lines across the top 6 inches of my screen. The rest of the picture is unaffected but it is very annoying.
It seems cheaper to replace the tv rather than fix it. I've only had just over a year which was when the warranty expired. I want to fix it rather than replace it.
What cost effective measure can be taken to fix this problem?
Hello Gary,\015\012\015\012Sorry for the delay in replying to you, but there has been a technical fault and we have not been able to answer questions.\015\012\015\012The most economical way to have your TV fixed is by the manu ...
Flat Panel Televisions
I have a Hitachi 43FWX20B. I can see the red is not lined up with the blue and green on the far left side of the screen. Only the red and only on the far left side of the screen. Blue and Green are OK.
I tried the Magic Focus, I get a error code 5. I tried manual Focus of the red on the far left of the screen. I can ont move the red.
Do I need to replace the Convergence Chips? Or could this be a bad resistor? If so, witch one.
Please do us a favor and rate this by cliking the thumps up icon located here >>>>>>Projection TV sets have ...
Philips Magnavox 9P6034C 60" Rear Projection Television
I have a Vizio VA370M. My problem is that the vizio's logo stays on screen and none button of the tv or the remote control responde, it seems to be a problem with the lcd controller because at first i noticed that the cable that goes to the screen was a little loose and then it works ok but now it does the same thing again. I also tried disconnect the power cord and wait for some time to reset the tv but it not seems to work.
The image looks great but again...the logo is still on screen and t
Vizio VA370M 37 in. TV
Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful
Samsung HP-R4262 42 in. Plasma Television
I have a Mitsubishi TV, Model VS-5011, Serial # 112892... yesterday I tried to use the PIP to watch a baseball game and also a movie... we have Direct TV and everything was working fine until I tried to use PIP... then the screen went to a snowy effect on ANT A and I cannot seem to do anything to get it back... can you help me... any help would be greatly appreciated... thanks, Susan
Hello Susan,\015\012\015\012As you have DirecTV, I'm assuming it's connected to the TV with an AV cable rather than a coaxial cable.\015\012\015\012In this case, you can get the DirecTV channels back by pressing one of the ...
Mitsubishi Projection Televisions
I have just bought the Panasonic DMR-EX99VEBK 250GB HDD DVD/VHS Recorder with Freeview+
and when I try to set it up , it doesn't seem to communicate with the television
Additionally the unit screen displays please wait. After several minutes the screen displays HDDERR and the dvd tray opens
I have tried this several times and there is no evidence of auto setup
Hope you can help
Panasonic Flat Panel Televisions
I am currently trying to connect a laptop to my TV monitor for watching Hulu and some wmv files. Everything is fine on the laptop and when i connect via an SVGA cable everything is fine for 10-40 minutes when the center of the screen scrambles suddenly, if i shut th tv off for a few minutes the issue goes away for a while and then starts again. I have changed screen noise reduction to high, tried both video and text modes and nothing helps. If it is relevant this is the second laptop that has
Tries go into the computer Control panel go to monitor resolution change it lower resolution like 1020 to 800 should solved ur video problems,scrambling video is tv not supporting the current resolutions. ...
RCA MM36100 36" TV