Is that the av channel? if so, how do you know your getting a signal from the ps3? try hooking the ps3 up to something else to make sure you have a signal coming out of that cable (this is where you have to start) if you have another device like a DVD player, or VCR, hook that up to the AV input (or channel one as you say). if you get a picture from those devices, the problem is your ps3 not sending the signals to the tv. sorry I can't be more helpful, but that's my guess
Suggested Questions/Answers :
It is recommended you read all this kind of situations
I just bought a Samsun Series 4+ / 440 / 450 (on the users manual lol) but when i try to hook up my DTV or PS3 using an AV cable, nothing shows up. In the Sources, it shows "AV" but when i select it, it says no signal. The AV cable is plugged into the channel 1 slot and it is on channel 1 when i switch to AV. Please help.
Is that the av channel? if so, how do you know your getting a signal from the ps3? try hooking the ps3 up to something else to make sure you have a signal coming out of that cable (this is where you have to start) if you have another device like a DV ...
Samsung LN-T4053H 40 in. LCD Television
My tv is showing black and white spots. no picture, but i pay for cable. the cable guy say i need to find out how to channel scan. please help me
Check out this link http://www.fixya.com/support/p3416748-toshiba_55ht1u_55_inch_1080p_120hz_lcd_h/solutions/page-4\012 ...
Toshiba 55HT1U 55-inch 1080p 120Hz LCD TV Refurbished
PC unsupported plug in my pc via vga cable and it shows unsupported. Yes i have it set to PC, yes the cord works, yes its plugged in. On my PC i try and bring up the other moniter and it says theres something plugged into the vga port on my laptop but theres nothing on the receiving end. Is there any way to get software for this tv to support vga? or is there atleast a way to reset to factory configuration?
Venturer 19 Class 720p LED LCD TV w/ DVD
I have an Insignia NS-LCD42HD-09 42 inch flat screen tv. The HDMI input works, but the component cable says no signal, and I only get cable on two channels. All other channels say no signal. The two channels I get have both picture and sound, and it is not my cable company because I plugged in another tv to the same cable, and everything works fine. I've had this TV for almost three years.
Insignia NS-LCD42HD-09 42 in. HD-Ready LCD TV
Okay, well I have a JVC AV 32120 and it will run DVDs and all fine. That's great and all but when we plug the cable into the back and go to watch tv, we won't get anything coming through, just a blue screen. I've tried going into the menu and adding the channels individually, then the auto programing mode as well, I've gone as far as resetting all the v chip codes and still nothing! I'm desperate, please anyone?!
I would check and make sure you are connected properly in the back of the unit. Sometimes people put them in a little back ward and while they will allow you to watch a show they will not let the tv pass threw. the other would be making sure to selec ...
JVC Standard (CRT) Televisions
I have a Daewoo dtq-20u9sc tv. Out of the blue, channels are no longer available when selecting the input options (only av1, av2, av3, and cbykc...).
I tried to go the the tuning menu, but no options are available there either (only says "Tuning").
Any help is appreciated, as I can no longer get my digital cable signal to show on the tv.
Same with mine. did it fix? ...
Daewoo DTQ-20U9SC TV
What channel do i put my tv on to watch cable, I attached cable cord to watch tv, but the screen says, no channels found. trying to scan channels but nothing is working. How do I get channels and watch tv? I'm connecting only the cable wired.
Westinghouse SK-26H240S Television
Hitachi tv will not show cable channels after being unplugged and plugged back in. cable is working everywhere else but this tv, the tv acts like it is on the wrong settings, how do I get it back to picking up cable channels
Flat Panel Televisions
Why does my tv screen appear gray with no picture, but the sound is okay? It's not the cable. The cable company came out and said the problem is the tv. All wires are correctly plugged in. The screen is gray then a white block, dark gray block, and then another gray block. The sound for tv shows is on, you can hear what shows are on, but can't actually see the show displayed. This wasn't in the troubleshooting section of the manual. Please help? Also, you can't see the menus or input menus or an
Polaroid Flat Panel Televisions
Okay, so i plugged my xbox in and then i plug it into the tv, but no picture pops up at all, it says check cable signal, but i don't know what cable, and i tried hooking it up in the 1 component(under the 2 cmponent because there's only 2) can u tell me what "check signal cable is" or help me out please?
What colour are the plugs on the lead you are using, if you have a component lead it will have a green a red and a blue plug if its composite you will have a red white and yellow plug ...
Flat Panel Televisions
I bought a TOSHIBA 32KV500B tv. At the Initial Installation mistakenly I selected "yes" for 'do you want to search analogue channels?' guestion. And then I lost all my automatically selected digital channels and I cannot go back to retune the channels. I have no SETUP in the main menu and then no INSTALLATION option. I have 6 main thing: picture, sound, feature, install, program table, Source: tv. I have tried to use the APS but this one retunes the analoge chanells only. Please help me how I c
I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by press ...
Toshiba Flat Panel Televisions
BAUHN I purchased the above TV at Aldi,s Liverpool store in Sydney 10/04/2013. When I set up TV the Guide (EPG) was working fine. For some reason the Guide (EPG) has now stopped showing any programs and says No Event Information and the same message when display is selected on the remote for the program you are watching. The signal strength for all channels is showing 4 to 6 bars and the picture is fine, I have tried Auto Scan again and tuned in all Channels again but this made no difference. W
Flat Panel Televisions
Rca p61939 My Rca projection tv worked just great then one day went to turn on there is nothing. I have sound but absolutely no picture. I have checked all cables, tried different cable box, dvd boxe etc. Nothing shows up on the screen at all, not even the standard channel indicator. What is wrong and can this be fixed and how?
RCA P61939 61" Rear Projection Television
I have a 27N-S100 TV. It was given to me with no remote. The Cable plug thing in the back is completely broken off, but I was told the TV could work perfectly by using the 3 colored cables (I believe they are called A/V cables: yellow, red and white?) and going through a VCR. I have tried endlessly to hook these cables up with my VCR and I am getting nowhere. Not having the remote, I downloaded the owners manual and read through it and it showed how to access the menu through the two channel bu
What you're trying to do shouldn't work unless the VCR has a digital tuner in it or your cable company still hasn't converted over to digital as of yet. You will need to get a digital cable box from your cable company.Connect the av cabl ...
Sharp 27N-S100 27" TV
Brought a new jvc LT-32DA30J tv and for two days worked well. However I come home today and turned the tv on and it came up with a message in a box saying "no channels" found. So I tried to retune the tv still nothing, done first installation still nothing even moved the ariel to different positions and still nothing. Please can you advice me what to do
Flat Panel Televisions
Jensen 19" LCD JE 1909 will scan and play cable channels but will not scan and play air or antenna channels. After running auto scan a window comes up that says "please run channel auto scan".
Jensen Flat Panel Televisions
Phillips 32 inch lcd model 32pfl3504d/f7
when i hook up my phillips dvp3982 dvd player with a hdmi cable, ports 1 and 3 do nothing. port 2 gives an screen message that says "format not supported"
the composite video cables work fine, but the picture quality sucks.
i have tried 2 different hdmi cables, so i do not think that is the issue.
please, HELP ! ! !
Philips 32PFL3504D 32 in. LCD TV
Just bought SAGEM PVR second hand but no instruction book. previous Toppfield PVR worked fine but SAGEM box says that the aerial connection isn't working...it is plugged into the right plug but checking cable, plug etc and it still won't work...Suggestions please?
Flat Panel Televisions
Hi have a jvc pd-42dx6bj when i turn it on i get the green light to say there is power i hear a noise like the snowy picture sound for a second then nothing no picture but light is still on if i use the remote i can change channel and it will make a noise again for second then again nothing any ideas please best regards gordon
JVC PD-42DX6 42 in. Plasma Television
My philips tv when turned on shows the philips logo then it goes to black screen. i have unplugged the tv, cable box, HDMI cables, every thing. still nothing. PLEASE HELP!
Philips 47PFL3704D 47 in. LCD TV
TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance
Try to enter auto scan.. ...
Flat Panel Televisions
I have a Pioneer Plasma with a separate media receiver. I just changed cable companies. In setting up with their "box", my receiver when trying to turn on just flashes red/green. Can't get it to work. The tv shows a picture (3/4 screen) and somewhat is somewhat "stretched", but NO VOLUME! Can anyone help? The new cable company says there is nothing they can do. They think my tv is incompatible with their "box"
Hi,\015\012\015\012Please let me know what cord are you using to connect the cable box to your TV?\015\012\015\012Jdvillanueva ...
Pioneer PDP-4350HD 43 in. Plasma Television
My tv will not retain the input 4 setting to receive the signal from my cable box. When you turn the TV on it would say please wait and then the Input 4 box would appear ont he screen and then the picture would appear. The tv now flashes please wait and then goes black. When you press input on the remote, nothing happens.
Sharp LC40E77U LCD TV
Viewsonic N2635w says menu locked. Have tried holding down channel down key for over 5 seconds. Nothing happened. Whatever button I press on the remote it says menu lock. Please help me.
ViewSonic N2635w 26 in. LCD Television
Our tv will not recognize the cable cord attached to it. We hooked another tv to it. The cord is not bad. We attempted to search for channels and it says there is no cable attached. Is there a button that needs to be pushed. I dont have the owners manual so I am not sure what to do? Is there a switch in the back? The people that owned this tv before ux had satelite. Please Help.
Check in the menu under picture or video settings and see if there is options for the inputs. some tv's allow you to disable inputs for faster switching. if you only have a dvd player but your tv allows for 8 input devices, you're always having to pr ...
Proscan PS27500 27" TV