Having problems with your Flat Panel Televisions ?

How to troubleshoot Samsung plasma tv power supply


\015 Relays on the power supply are clicking on and off numerous times, but it is hit or miss, meaning that it does not happen every time i plug the tv in. Also, there is no audio from the speakers, only from the headphone jack. Two capacitors have been replaced previously and none of the remaining caps appear to be bad. All fuses are good and there is proper voltage to the power supply. Checked voltage on all of the other panel connections(Vs, Vg, Va) and all appear to be as labeled.\012\012Just wondering where to go from here? Where to look next? Any assistance or nudge in any direction would be greatly appreciated.\015

Answers :

If relays are clicking, the problem could also be the diode connected to the relay or its own power supply. Check whether the relay is getting power enough to remain activated. This chattering can also be caused due to relays becoming weak or by short circuits on its load.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

How to troubleshoot Samsung plasma tv power supply


If relays are clicking, the problem could also be the diode connected to the relay or its own power supply. Check whether the relay is getting power enough to remain activated. This chattering can also be caused due to relays becoming weak or by ... Samsung HP-T4254 42 in. Plasma Television

I have a Samsung HP-S5053 plasma tv that has audio but no video. I verified the power supply is working with a voltmeter but am not sure how i should go about troubleshooting to determine if i have bad buffer boards or bad main boards (x and y). Please advise.


... Flat Panel Televisions

Samsung HP-T5054 plasma, 40 months old. Apply power, power indicator blinks several times normally then goes very dim but steady on. No picture. Have removed back of TV and inspected. All fuses verified good. No bulging or leaking caps. Have BN44-00160A Rev 1.2 power supply. Have multimeter. What next?


... Samsung PS50P7H 50 in. HD-Ready Plasma TV

Samsung plasma tv pn50b430. did the diagnostic unplugged every thing from power supply board.but when plug the ysus board it turns of.what could be happing ?


... Samsung PN50B430 50 in. TV

Samsung UN55ES7500F troubleshooting power supply


... Samsung UN55ES7500F 55" 3D LED TV

Samsung LCD tv la32r81bdx turns on for only one second then shuts down. Tried all buttons, reset on remote. Is it a power supply issue? Any troubleshooting hints appreciated. Thanks


... Flat Panel Televisions

How to fix PS42S5HX/SAP power supply card - Samsung PS42S5H 42 in. HD-Ready Plasma Television


... Samsung PS42S5H 42 in. HD-Ready Plasma Television

The power supply unit of my Sansui 42 in Plasma TV is Faulty. Its make is Samsung P/N 3501Q00160A-REV.A and S/N SE06803740. Kindly assist me find a replacement.


Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following sympto ... Sansui HDLCD3200 TV

I have a pn42a450p1dxza samsung plasma screen that is suffering from the "clicking effect". I have checked all the capacitors(none of which were bulging or "popped out") and I even replaced the power supply. I am still having the same problem.


... Samsung PN42A450 Plasma TV

Samsung plasma tv ps50q96hd power supply fault


... Samsung PS50Q97HDX 50 in. Plasma TV

Samsung PS42A5S PLASMA TV POWER SUPPLY FAULTY


... Flat Panel Televisions

Samsung plasma hpt5054x/xaa California no sound no picture replaced y boards, power supply still no sound or picture help


If you got no picture replace the buffer boards. ... Samsung Flat Panel Televisions

Samsung TV Model LA40A650A1M back light intermittently strobeing and sometimes cuts out completely, powering TV off via remote and back on temporarily resolves issue, but returns at various times, have removed power supply board to check capacitors - look OK none appear to be leaking. Power supply board details Hansol LCD, Rev 1.3, Manf date 11 July 08, Model SIP 408A BN44-001947A I note in some posts for similar Samsung P/S boards it has been suggested replacing specific capacitors - any su


You can't see if a cap is good or bad jus looking at them they have to be measured>They loose their capacitance because they dry overtime.I do sugest that you replace you power supply module or replace all caps.Possibily you may have a broken ... Samsung Flat Panel Televisions

Samsung Plasma won't power on


This is not a capacitor problem. set is only 18 months old - has something to do with x y sustain boards not allowing smps to power on the high voltages. ... Samsung Flat Panel Televisions

I have Samsung UN46B8000XFXZA LED TV. After power surge it will not come on. Plugging it in causes the blue power up light to come on for one second. The relay on the power supply (BN44-00270A) begins to click. The screen does not come on. All appears dead except for the clicking of the relay on the PS board ever few seconds.rnIf I unplug the connector from the power supply to the Main Unit Board (BN94-02661E) and apply 110v, the screen backlight comes on and there is no relay clicking. (


Yes based on your testing it appears that the power supply is at fault solely and you can opt to attempt a repair or replace it altogether. Unfortunately you will not be certain that the main board does not also need to be replaced until you have rep ... Samsung Flat Panel Televisions

I have 50 inches plasma Hitachi TV (ALiS 1080HD). As the TV was on, the screen stopped showing (no picture) and no sound could be listened as well, without any reason. The power light started flashing (on and off) so I turned the TV off from the power supply (as the remote control was not responding). Few seconds later when I turned the power supply back on for a moment I heard a sound (making me believe that the problem was fixed) but once again the power light started flashing with the same en


... Flat Panel Televisions

I have a Vizio VP42 HDTV (inside says LG PDP42X3U400). One day I turned on the TV and heard a pop. I took off the back of the TV and inspected the main power supply board (P/N 6709900019A). Capictor C802 had totally blown up. The tv would not power on at all. I removed U801 and when plugging in the AC cord I heard two relays turn on and then back off after 1 to 2 seconds. I gave up troubleshooting that board and bought a new power supply board. When I installed this board and plug in the


If Va and Vs are missing even when the Y-sus board is disconnected from power board then the new board is defective - return it. On the original one the board is shut down (the relays are disconnected) because there is still a short on one of its out ... Flat Panel Televisions

I have a Samsung lcd-led TV Mod UN32C4000PD Ver #CN02 that has 6 blinks when you turn it on. You can here the samsung sound when you push the power but no picture or sound. I put a high power light to the screen but no picture. Also I ck the power supply and i have all voltages. Thank You Pat


This is a classic "Hic-upping" switchmode power supply problem. The protection circuitry inside the SMPSU, has sensed a severe potential problem, and is attempting the shutting of the set, down to avoid a fire, explosion, or both. This s ... Flat Panel Televisions

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.


... Flat Panel Televisions

I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?


It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ... Hitachi 55HDS69 55 in. Plasma Television

RCA HDTV plasma 42pa30rq just clicks won't power on- replaced power supply bc led on old one wouldn't light up and assumed it was problem- same thing with new power supply


... Flat Panel Televisions

Panasonic Viera Plasma 42" Model TH-P42X30D cannot power up. My Technician told me that it is a oscillator problem and he also told me that he can modify the Power Supply Board with normal TV power su


... Flat Panel Televisions

I have a samsung HP-T5054 plasma tv the tv powers up and the samsung tone is audable but i get no picture on the screen the screen is not broken the power light flashes 5 times then is steadily lit on the digital board in the back of the set led 2000 and 2001 stay lit led 2003 light for 2 seconds then goes out but led 2002 flashes every second I had a shop test my Y main and buffers with a set that they have and those parts test out I am a electronis tech with 12 years in the A/V repair field


... Samsung Flat Panel Televisions

Samsung LE46B650T2PXXC I have a 46" LCD Samsung Model Nr. LE46B650T2PXXC Version AC07. Not even 3 years old. It does not come on from standby. The LED Red light blinks 8 times followed by a longish pause and than starts blinking again. The night before I turned it off OK, and the following day it would not come on. I normally turn it off from the Mains supply. Do you think this is the Power Supply ? George


... Samsung HL-S5679W 56" HDTV

Samsung CS 29 K44 ME , tv power supply not working , in that circuit board the STR and the ZENOR DIODE were burst due to high voltate power supply, please given the same model STR and the ZENOR DIODE no with full circuit diagram


... Samsung CW29M64NS 29" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2534 seconds